UNI - Plastics Rubber Glass Ceramics and Other Materials Collection
This collection contains documents from the following standards organization(s): Ente Nazionale Italiano di Unificazione
| UNI UNI CEN/TS 15880 | EN-Advanced technical ceramics - Ceramic composites - Determination of the fibre/ matrix interfacial frictional shear stress at room temperature by a single fibre push-out method | |
| UNI UNI CEN/TS 15881 | EN-Advanced technical ceramics - Ceramic composites - Determination of the fibre/ matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites | |
| UNI UNI CEN/TS 635-4 | EN-Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing guideline | |
| UNI UNI CEN/TS 820-5 | EN-Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 5: Determination of elastic moduli at elevated temperatures | |
| UNI UNI CEN/TS 843-6 | EN-Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 6: Guidance for fractographic investigation | |
| UNI UNI EN 1001-1 | EN-Durability of wood and wood-based products - Terminology - Part 1: List of equivalent terms | |
| UNI UNI EN 1001-2 | EN-Durability of wood and wood based products - Terminology - Part 2: Vocabulary | |
| UNI UNI EN 1006 | EN-Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties | |
| UNI UNI EN 1007-1 | EN-Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of size content | |
| UNI UNI EN 1007-2 | EN-Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of linear density | |
| UNI UNI EN 1007-3 | EN-Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of filament diameter and cross-section area | |
| UNI UNI EN 1007-4 | EN-Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 4: Determination of tensile properties of filaments at ambient temperature | |
| UNI UNI EN 1007-5 | EN-Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament t | |
| UNI UNI EN 1007-5 | EN-Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament t | |
| UNI UNI EN 1007-6 | EN-Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Parte 6: Determination of tensile properties of filaments at high temperature | |
| UNI UNI EN 1036 | EN-Glass in building - Mirrors from silver- coated float glass for internal use | |
| UNI UNI EN 1036-1 | EN-Glass in building - Mirrors from silver- coated float glass for internal use - Part 1: Definitions requirements and test methods | |
| UNI UNI EN 1036-2 | EN-Glass in building - Mirrors from silver- coated float glass for internal use - Part 2: Evaluation of conformity; product standard | |
| UNI UNI EN 1051-1 | EN-Glass in building - Glass blocks and glass pavers - Part 1: Definitions and description | |
| UNI UNI EN 1051-2 | EN-Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/Product standard | |
| UNI UNI EN 1051-2 | EN-Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/Product standard | |
| UNI UNI EN 1058 | EN-Wood-based panels. Determination of characteristics values of mechanical properties and density. | |
| UNI UNI EN 1058 | EN-Wood-based panels - Determination of characteristics 5-percentile values and characteristic mean values | |
| UNI UNI EN 1063 | EN-Glass in building - Security glazing - Testing and classification of resistance against bullet attack | |
| UNI UNI EN 1071-1 | EN-Advanced technical ceramics - Methods of test for ceramic coatings - Determination of coating thickness by contact probe filometer | |
| UNI UNI EN 1071-10 | EN-Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning | |
| UNI UNI EN 1071-12 | EN-Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test | |
| UNI UNI EN 1071-13 | EN-Advanced technical ceramics - Methods of test for ceramic coatings - Part 13: Determination of wear rate by the pin- on-disk method | |
| UNI UNI EN 1071-2 | EN-Advanced technical ceramics - Methods of test for ceramic coatings - Determination of coating thickness by the crater grinding method | |
| UNI UNI EN 1071-3 | EN-Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion and other mechanical failure modes by a scratch test | |
| UNI UNI EN 1071-4 | EN-Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA) | |
| UNI UNI EN 1071-6 | EN-Advanced technical ceramics - Methods of test for ceramic coatings - Part 6: Determination of the abrasion resistance of coatings by a micro- abrasion wear test | |
| UNI UNI EN 1071-9 | EN-Advanced technical ceramics - Methods of test for ceramic coatings - Part 9: Determination of fracture strain | |
| UNI UNI EN 1072 | EN-Plywood. Description of bending properties for structural plywood. | |
| UNI UNI EN 1084 | EN-Plywood. Formaldehyde release classes determined by the gas analysis method. | |
| UNI UNI EN 1087-1 | EN-Particleboards. Determination of moisture resistance. Boil test. | |
| UNI UNI EN 1096-1 | EN-Glass in building - Coated glass - Definitions and classification | |
| UNI UNI EN 1096-2 | EN-Glass in building - Coated glass - Part 2: Requirements and test methods for class A B and S coatings | |
| UNI UNI EN 1096-3 | EN-Glass in building - Coated glass - Requirements and test methods for class C and D coatings | |
| UNI UNI EN 1096-4 | EN-Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard | |
| UNI UNI EN 1096-4 | EN-Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard | |
| UNI UNI EN 1122 | EN-Plastics - Determination of cadmium - Wet decomposition method | |
| UNI UNI EN 1128 | EN-Cement-bonded particleboards. Determination of hard body impact resistance. | |
| UNI UNI EN 1159-1 | EN-Advanced technical ceramics - Ceramic composites - Thermophysical properties - Determination of thermal expansion | |
| UNI UNI EN 1159-2 | EN-Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 2: Determination of thermal diffusivity | |
| UNI UNI EN 1159-3 | EN-Advanced technical ceramics - Ceramic composites thermophysical properties - Determination of specific heat capacity | |
| UNI UNI EN 1193 | EN-Timber structures - Structural timber and glued laminated timber - Determination of shear strength and mechanical properties perpendicular to the grain | |
| UNI UNI EN 1194 | EN-Timber structures - Glued laminated timber - Strength classes and determination of characteristics values | |
| UNI UNI EN 120 | EN-Wood based panels. Determination of formaldehyde content. Extraction method called perforator method. | |
| UNI UNI EN 12103 | EN-Resilient floor coverings - Agglomerated cork underlays - Specification. | |
| UNI UNI EN 12104 | EN-Resilient floor coverings - Cork floor tiles - Specification | |
| UNI UNI EN 12105 | EN-Resilient floor coverings - Determination of moisture content of agglomerated composition cork | |
| UNI UNI EN 12107 | EN-Plastics piping systems - Injection- moulded thermoplastics fittings valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping | |
| UNI UNI EN 12118 | EN-Plastics piping systems - Determination of moisture content in thermoplastics by coulometry | |
| UNI UNI EN 12150-1 | EN-Glass in building - Thermally toughened soda lime silicate safety glass - Definition and description | |
| UNI UNI EN 12150-2 | EN-Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard | |
| UNI UNI EN 12150-2 | EN-Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard | |
| UNI UNI EN 1217 | EN-Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles | |
| UNI UNI EN 12246 | EN-Quality classification of timber used in pallets and packaging | |
| UNI UNI EN 12248 | EN-Sawn timber used in industrial packaging - Permitted deviations and preferential sizes | |
| UNI UNI EN 12249 | EN-Sawn timber used in pallets - Permitted deviations and guidelines for dimensions | |
| UNI UNI EN 12289 | EN-Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Determination of in-plane shear properties | |
| UNI UNI EN 12290 | EN-Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties | |
| UNI UNI EN 12291 | EN-Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmosphere pressure - Determination of compression properties | |
| UNI UNI EN 12337-1 | EN-Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description | |
| UNI UNI EN 12337-2 | EN-Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/ Product standard | |
| UNI UNI EN 12337-2 | EN-Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/ Product standard | |
| UNI UNI EN 12369-1 | EN-Wood-based panels - Characteristc values for structural design - OSB particleboards and fibreboards | |
| UNI UNI EN 12369-2 | EN-Wood-based panels - Characteristic values for structural design - Part 2: Plywood | |
| UNI UNI EN 12369-3 | EN-Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels | |
| UNI UNI EN 12465 | EN-Wood poles for overhead lines - Durability requirements. | |
| UNI UNI EN 12479 | EN-Wood poles for overhead lines - Sizes - Methods of measurement and permissible deviations | |
| UNI UNI EN 12509 | EN-Timber poles for overhead lines - Test methods - Determination of modulus of elasticity bending strength density and moisture content | |
| UNI UNI EN 12510 | EN-Wood poles for overhead lines - Strength grading criteria | |
| UNI UNI EN 12511 | EN-Wood poles for overhead lines - Determination of characteristic values | |
| UNI UNI EN 12575 | EN-Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC | |
| UNI UNI EN 12576 | EN-Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC BMC and DMC | |
| UNI UNI EN 12600 | EN-Glass in building - Pendulum test - Impact test method and classification for flat glass | |
| UNI UNI EN 12603 | EN-Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data |