UNI - Engineering Components & Equipment Automotive and Railway Collection
This collection contains documents from the following standards organization(s): Ente Nazionale Italiano di Unificazione
| UNI UNI EN 1013-3 | EN-Light transmitting profiled plastic sheeting for single skin roofing - Specific requirements and test methods for sheets of polyvinyl chloride (PVC) | |
| UNI UNI EN 1013-4 | EN-Light transmitting profiled plastic sheeting for single skin roofing - Specific requirements test methods and performance of polycarbonate (PC) sheets | |
| UNI UNI EN 1013-5 | EN-Light transmitting profiled plastic sheeting for single skin roofing - Specific requirements test methods and performance of polymethylmethacrylate (PMMA) sheets | |
| UNI UNI EN 10226-1 | EN-Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions tolerances and designation | |
| UNI UNI EN 10226-2 | EN-Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions tolerances and designation | |
| UNI UNI EN 10226-3 | EN-Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges | |
| UNI UNI EN 10230-1 | EN-Steel wire nails - Loose nails for general applications | |
| UNI UNI EN 10280 | EN-Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester | |
| UNI UNI EN 10280 | EN-Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester | |
| UNI UNI EN 10282 | EN-Magnetic materials - Method of test for the determination of surface insulation resistance of electrical sheet and strip | |
| UNI UNI EN 10330 | EN-Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open circuit | |
| UNI UNI EN 10331 | EN-Magnetic materials - Specification for sintered soft magnetic materials | |
| UNI UNI EN 10332 | EN-Magnetic materials - Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties | |
| UNI UNI EN 10342 | EN-Magnetic materials - Classification of surface insulations of electrical steel sheet strip and laminations | |
| UNI UNI EN 1152 | EN-Tractors and machinery for agriculture and forestry. Guards for power take-off (PTO) drive shafts. Wear and strenght tests. | |
| UNI UNI EN 12080 | EN-Railway applications - Axleboxes - Rolling bearings | |
| UNI UNI EN 12080 | EN-Railway applications - Axleboxes - Rolling bearings | |
| UNI UNI EN 12081 | EN-Railway applications - Axleboxes - Lubricating greases | |
| UNI UNI EN 12082 | EN-Railway applications - Axleboxes - Performance testing | |
| UNI UNI EN 12082 | EN-Railway applications - Axleboxes - Performance testing | |
| UNI UNI EN 12095 | EN-Plastics piping systems - Brackets for rainwater piping systems - Test method for bracket strength | |
| UNI UNI EN 12100 | EN-Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports | |
| UNI UNI EN 12184 | EN-Electrically powered wheelchairs scooters and their chargers - Requirements and test methods | |
| UNI UNI EN 12195-3 | EN-Load restraint assemblies on road vehicles - Safety - Lashing chains | |
| UNI UNI EN 12201-4 | EN-Plastics piping systems for water supply - Polyethylene (PE) - Valves | |
| UNI UNI EN 12229 | EN-Surfaces for sports areas - Procedure for the preparation of synthetic turf and textile test pieces | |
| UNI UNI EN 12252 | EN-LPG equipment and accessories - Equipping of LPG road tankers | |
| UNI UNI EN 12252 | EN-Equipping of Liquefied Petroleum Gas (LPG) road tankers | |
| UNI UNI EN 12252 | EN-LPG equipment and accessories - Equipping of LPG road tankers | |
| UNI UNI EN 12252 | EN-LPG equipment and accessories - Equipping of LPG road tankers | |
| UNI UNI EN 12253 | EN-Road transport and traffic telematics - Dedicated short-range communication - Physical layer using microwave at 58 GHz | |
| UNI UNI EN 12293 | EN-Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling | |
| UNI UNI EN 12294 | EN-Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum | |
| UNI UNI EN 12295 | EN-Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling | |
| UNI UNI EN 12299 | EN-Railway applications - Ride comfort for passengers - Measurement and evaluation | |
| UNI UNI EN 12324-1 | EN-Irrigation techniques - Reel machine systems - Size series. | |
| UNI UNI EN 12324-2 | EN-Irrigation techniques - Reel machine systems - Specifications of polyethylene tubes for reel machines | |
| UNI UNI EN 12324-3 | EN-Irrigation techniques - Reel machine systems - Presentation of technical characteristics | |
| UNI UNI EN 12324-4 | EN-Irrigation techniques - Reel machine systems - Check list of users requirements | |
| UNI UNI EN 12325-1 | EN-Irrigation techniques - Centre pivot and moving lateral systems - Presentation of the technical characteristics | |
| UNI UNI EN 12325-2 | EN-Irrigation techniques - Centre pivot and moving lateral systems - Minimum performances and technical characteristics | |
| UNI UNI EN 12325-3 | EN-Irrigation techniques - Centre pivot and moving lateral systems - Terminology and classification | |
| UNI UNI EN 12397 | EN-Safety requirements for cableway installations designed to carry persons - Operation | |
| UNI UNI EN 12406 | EN-Swap bodies - Thermal swap bodies of Class C - Dimensions and general requirements | |
| UNI UNI EN 12408 | EN-Safety requirements for cableway installations designed to carry persons - Quality assurance | |
| UNI UNI EN 12410 | EN-Swap bodies - Thermal swap bodies of Class A - Dimensions and general requirements | |
| UNI UNI EN 12484-1 | EN-Irrigation techniques - Automatic turf irrigation systems - Definition of the programme of equipment by the owner | |
| UNI UNI EN 12484-2 | EN-Irrigation techniques - Automatic turf irrigation systems - Design and definition of typical technical templates | |
| UNI UNI EN 12484-3 | EN-Irrigation techniques - Automatic turf irrigation systems - Automatic control and system management | |
| UNI UNI EN 12484-4 | EN-Irrigation techniques - Automatic turf irrigation systems - Installation and Acceptance | |
| UNI UNI EN 12484-5 | EN-Irrigation techniques - Automatic turf irrigation systems - Testing methods of systems | |
| UNI UNI EN 12512 | EN-Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners | |
| UNI UNI EN 12512 | EN-Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners | |
| UNI UNI EN 12525 | EN-Agricultural machinery - Front loaders - Safety | |
| UNI UNI EN 12525 | EN-Agricultural machinery - Front loaders - Safety | |
| UNI UNI EN 12525 | EN-Agricultural machinery - Front loaders - Safety | |
| UNI UNI EN 12526 | EN-Castors and wheels - Vocabulary recommended symbols and multilingual dictionary | |
| UNI UNI EN 12527 | EN-Castors and wheels - Test methods and apparatus. | |
| UNI UNI EN 12530 | EN-Castors and wheels - Castors and wheels for manually propelled institutional applications. | |
| UNI UNI EN 12532 | EN-Castors and wheels - Castors and wheels for applications up to 11 m/s (4 km/h). | |
| UNI UNI EN 12533 | EN-Castors and wheels - Castors and wheels for applications over 11 m/s (4 km/h) and up to 44 m/s (16 km/h). | |
| UNI UNI EN 1256 | EN-Gas welding equipment - Specification for hose assemblies for equipment for welding cutting and allied processes. | |
| UNI UNI EN 12561-1 | EN-Railway applications - Tank wagons - Part 1: Marking of tank wagons for the carriage of dangerous goods | |
| UNI UNI EN 12561-2 | EN-Railway applications - Tank wagons - Bottom emptying devices for liquid products including vapour return | |
| UNI UNI EN 12561-3 | EN-Railway applications - Tank wagons - Bottom filling and emptying devices for gases liquefied under pressure | |
| UNI UNI EN 12561-4 | EN-Railway applications - Tank wagons - Top devices for top emptying and filling of liquid products | |
| UNI UNI EN 12561-5 | EN-Railway applications - Tank wagons - Top devices for bottom emptying and top filling of liquid products | |
| UNI UNI EN 12561-6 | EN-Railway applications - Tank wagons - Manholes | |
| UNI UNI EN 12561-7 | EN-Railway applications - Tank wagons - Part 7: Platforms and ladders | |
| UNI UNI EN 12561-8 | EN-Railway applications - Tank wagons - Part 8: Heating connections | |
| UNI UNI EN 12573-1 | EN-Welded static non-pressurised thermoplastic tanks - General principles | |
| UNI UNI EN 12576 | EN-Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC BMC and DMC | |
| UNI UNI EN 12601 | EN-Reciprocating internal combustion engine driven generating sets - Safety | |
| UNI UNI EN 12608 | EN-Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification requirements and test methods | |
| UNI UNI EN 12608 | EN-Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification requirements and test methods | |
| UNI UNI EN 12613 | EN-Plastics warning devices for underground cables and pipelines with visual characteristics | |
| UNI UNI EN 12613 | EN-Plastics warning devices for underground cables and pipelines with visual characteristics | |
| UNI UNI EN 12640 | EN-Securing of cargo on road vehicles - Lashing points on commercial vehicles for goods transportation - Minimum requirements and testing | |
| UNI UNI EN 12642 | EN-Securing of cargo on road vehicles. Body structure of commercial vehicles. Minimum requirements |