UNI - Electronics and Aerospace Engineering Collection
This collection contains documents from the following standards organization(s): Ente Nazionale Italiano di Unificazione
| UNI UNI EN 15521 | EN-Health informatics - Categorial structure for terminologies of human anatomy | |
| UNI UNI EN 1571 | EN-Bar coding. Data identifiers. | |
| UNI UNI EN 1572 | EN-Bar coding. Unique identifier for transport units. | |
| UNI UNI EN 1573 | EN-Bar coding. Multi industry transport label. | |
| UNI UNI EN 1574 | EN-EDI. Message. Bayplan/stowage plan occupied and empty locations (BAPLIE). | |
| UNI UNI EN 1575 | EN-EDI. Message. Bayplan/stowage plan total numbers message (BATLTE). | |
| UNI UNI EN 1578 | EN-EDI. Message. Customs declaration message (CUSDEC). | |
| UNI UNI EN 1580 | EN-EDI. Message. Forwarding and consolidation summary message (FCSUM). | |
| UNI UNI EN 1581 | EN-EDI. Message. Arrival notice message (FTMAN). | |
| UNI UNI EN 1582 | EN-EDI. Message. Booking confirmation message (FTMBC) | |
| UNI UNI EN 1583 | EN-EDI. Message. Firm booking message (FTMBF) | |
| UNI UNI EN 1584 | EN-EDI. Message. Provisional booking message (FTMBP) | |
| UNI UNI EN 1585 | EN-EDI. Message. Instruction contract status message (FTMCS). | |
| UNI UNI EN 1586 | EN-EDI. Message. Instruction (FTMIN). | |
| UNI UNI EN 1587 | EN-EDI. Message. Payroll deductions advice message (PAYDUC). | |
| UNI UNI EN 15876-1 | EN-Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 1: Test suite structure and test purposes | |
| UNI UNI EN 1590 | EN-EDI. Message. Remittance advice message (REMADV). | |
| UNI UNI EN 1614 | EN-Health informatics - Representation of dedicated kinds of property in laboratory medicine | |
| UNI UNI EN 1635 | EN-Bar coding - Test specifications - Bar code symbols | |
| UNI UNI EN 1649 | EN-AIDC technologies - Operational aspects affecting the reading of bar code symbols | |
| UNI UNI EN 1681 | EN-EDI. Message. Delivery just in time message (DELJIT). | |
| UNI UNI EN 1682 | EN-EDI. Message. Despatch advice message (DESAVD). | |
| UNI UNI EN 1683 | EN-EDI. Message. Delivery schedule message (DELFOR). | |
| UNI UNI EN 1684 | EN-EDI. Message. Passenger list message (PAXLIST). | |
| UNI UNI EN 1685 | EN-EDI. Message. Party information message (PARTIN). | |
| UNI UNI EN 1686 | EN-EDI. Message. Purchase order response message (ORDRSP). | |
| UNI UNI EN 1687 | EN-EDI. Message. Purchase order message (ORDER). | |
| UNI UNI EN 1688 | EN-EDI. Message. Purchase order change request message (ORDCHG). | |
| UNI UNI EN 1689 | EN-EDI. Message. Inventory report message (INVRPT). | |
| UNI UNI EN 1690 | EN-EDI. Message. Invoice message (INVOIC). | |
| UNI UNI EN 1691 | EN-EDI. Message. Quality data message (QUALITY) | |
| UNI UNI EN 1692 | EN-EDI. Message. Quote message (QUOTES). | |
| UNI UNI EN 1693 | EN-EDI. Message. Request for quote message (REQUOTE). | |
| UNI UNI EN 1694 | EN-EDI. Message. Statement d'account message (STATAC). | |
| UNI UNI EN 1695 | EN-EDI. Message. Superannuation contributions advice message (SUPCOT). | |
| UNI UNI EN 1696 | EN-EDI. Message. Superrannuation maintenance message (SUPMAN). | |
| UNI UNI EN 1697 | EN-EDI. Message. Forwarding and transport shimpent charge calculation message. | |
| UNI UNI EN 1698 | EN-EDI. Messagge. Forwarding and transport rate information message (FTRIN). | |
| UNI UNI EN 1699 | EN-EDI. Message. Forwarding and transport schedule and availability information message (FTSAI). | |
| UNI UNI EN 1700 | EN-EDI. Message. International multimodal status report message (FTSTA). | |
| UNI UNI EN 1701 | EN-EDI. Message. Price/sales catalogue message (PRICAT). | |
| UNI UNI EN 1702 | EN-EDI. Message. Sanitary/phytosanitary cartificate (SANCRT). | |
| UNI UNI EN 1703 | EN-EDI. Message. Sales data report message (SLSRPT). | |
| UNI UNI EN 1780-1 | EN-Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for remelting master alloys and castings - Numerical designation system. | |
| UNI UNI EN 1828 | EN-Health informatics - Categorial structure for classifications and coding systems of surgical procedures | |
| UNI UNI EN 1833 | EN-EDI. Message. Syntax and service report message (CONTRL). | |
| UNI UNI EN 1867 | EN-Machine readable cards - Health care applications - Numbering system and registration procedure for issuer identifiers | |
| UNI UNI EN 1915-1 | EN-Aircraft ground support equipment - General requirements - Basic safety requirements | |
| UNI UNI EN 1915-2 | EN-Aircraft ground support equipment - General requirements - Stability and strength requirements calculations and test methods | |
| UNI UNI EN 1915-3 | EN-Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction | |
| UNI UNI EN 1915-4 | EN-Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction | |
| UNI UNI EN 1922 | EN-Information technology - Character repertoire and coding for interworking with Telex services | |
| UNI UNI EN 2000 | EN-Aerospace series. Quality assurance. EN aerospace products. Approval of the quality system of manufacturers. | |
| UNI UNI EN 2002-001 | EN-Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature | |
| UNI UNI EN 2002-002 | EN-Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature | |
| UNI UNI EN 2002-005 | EN-Aerospace series - Test methods for metallic materials - Part 005: Uninterrupted creep and stress-rupture testing | |
| UNI UNI EN 2003-009 | EN-Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination | |
| UNI UNI EN 2003-010 | EN-Aerospace series - Titanium and titanium alloys - Test methods - Part 010: Sampling for determination of hydrogen content | |
| UNI UNI EN 2004-1 | EN-Aerospace series. Test methods for aluminium and aluminium alloy products. Determination of electrical conductivity of wrought aluminium alloys. | |
| UNI UNI EN 2004-5 | EN-Aerospace series. Test methods for aluminium and aluminium alloys products. Determination of cladding thickness and copper diffusion of clad semi-finished products. | |
| UNI UNI EN 2009 | EN-Bearings-airframe rolling rigid single row ball bearings in steel. Diameter series 8 and 9. Dimensions and loads. Aerospace series. | |
| UNI UNI EN 2011 | EN-Bearings-airframe rolling rigid single row ball bearings in corrosion resisting steel. Diameter series 8 and 9. Dimensions and loads. Aerospace series. | |
| UNI UNI EN 2012 | EN-Bearings-airframe rolling rigid single row ball bearings in steel. Diameter series 0 and 2. Dimensions and loads. Aerospace series. | |
| UNI UNI EN 2014 | EN-Bearings-airframe rolling rigid single row ball bearings in corrosion resisting steel. Diameter series 0 and 2. Dimensions and loads. Aerospace series. | |
| UNI UNI EN 2015 | EN-Bearings-airframe rolling double row self aligning ball bearings in steel. Diameter series 2. Dimensions and loads. Aerospace series. | |
| UNI UNI EN 2017 | EN-Bearings-airframe rolling double row self aligning ball bearings in corrosion resisting steel. Diameter series 2. Dimensions and loads. Aerospace series. | |
| UNI UNI EN 2018 | EN-Bearings-airframe rolling single row self aligning roller bearings in steel. Diameter series 3 and 4. Dimensions and loads. Aerospace series. | |
| UNI UNI EN 2020 | EN-Bearings-airframe rolling single row self aligning roller bearings in corrosion resisting steel. Diameter series 3 and 4. Dimensions and loads. Aerospace series. | |
| UNI UNI EN 2022 | EN-Aerospace series. Bearings spherical plain in corrosion resisting steel with self lubricating liner. Light series. Dimensions and loads. | |
| UNI UNI EN 2023 | EN-Aerospace series. Bearings spherical plain in corrosion resisting steel with selg lubricating liner. Normal series. Dimension and loads. | |
| UNI UNI EN 2032-1 | EN-Aerospace series - Metallic materials - Conventional designation | |
| UNI UNI EN 2032-2 | EN-Aerospace series. Metallic materials. Coding of metallurgical condition in delivery condition. | |
| UNI UNI EN 2044 | EN-Aerospace series - Round bars drawn in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm ? D ? 63 mm - Dimensions | |
| UNI UNI EN 2045 | EN-Aerospace series - Square bars drawn in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm - a - 50 mm - Dimensions | |
| UNI UNI EN 2046 | EN-Aerospace series - Hexagonal bars drawn in aluminium and aluminium alloys - Tolerance class h 11 - Width across flats 7 mm - a - 50 mm - Dimensions | |
| UNI UNI EN 2047 | EN-Aerospace series - Beaded L-section extruded in aluminium alloys - Dimensions | |
| UNI UNI EN 2048 | EN-Aerospace series - Extruded L-section in aluminium alloys - Dimensions | |
| UNI UNI EN 2049 | EN-Aerospace series - Extruded channel section in aluminium alloys - Dimensions | |
| UNI UNI EN 2050 | EN-Aerospace series - Extruded T-section in aluminium alloys - Dimensions |