UNI - Electronics and Aerospace Engineering Collection
This collection contains documents from the following standards organization(s): Ente Nazionale Italiano di Unificazione
| UNI UNI EN 2667-6 | EN-Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Determination of water absorption | |
| UNI UNI EN 2680 | EN-Aerospace series - Nuts anchor self-locking floating selfaligning two lug in alloy steel cadmium plated MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235°C | |
| UNI UNI EN 2681 | EN-Aerospace series - Aluminium alloy AL- P7010 - T74 - Hand and die forgings - a < = 150 mm | |
| UNI UNI EN 2684 | EN-Aerospace series - Aluminium alloy AL- P7010- T7651 - Plate - 6 mm &lt; a < = 140 mm | |
| UNI UNI EN 2687 | EN-Aerospace series - Aluminium alloy AL- P7010-T7451 - Plate - 6 mm &lt; a < =160 mm | |
| UNI UNI EN 2693 | EN-Aerospace series. Aluminium alloy AL- 5086-H111. Sheet and strip 03 mm ² a ² 6 mm. | |
| UNI UNI EN 2693 | EN-Aerospace series. Aluminium alloy AL- 5086-H111. Sheet and strip 03 mm ² a ² 6 mm. | |
| UNI UNI EN 2693 | EN-Aerospace series - Aluminium alloy AL- P5086-H111 - Sheet and strip - 03 mm &lt; = a < = 6 mm | |
| UNI UNI EN 2694 | EN-Aerospace series - Aluminium alloy AL- P6061-T6 or T62 - Sheet and strip - 04 mm &lt; = a < = 6 mm | |
| UNI UNI EN 2694 | EN-Aerospace series. Aluminium alloy AL- 6061-T7 or T62. Sheet and strip 04 mm ² a ² 6 mm. | |
| UNI UNI EN 2695 | EN-Aerospace series.Aluminium alloy AL- P6081 - T6. Sheet and strip 03 mm ² a 6 mm. | |
| UNI UNI EN 2695 | EN-Aerospace series - Aluminium alloy AL- P6081-T6 - Sheet and strip - 03 mm &lt; = a < = 6 mm | |
| UNI UNI EN 2696 | EN-Aerospace series - Aluminium alloy AL- P7075-T6 or T62 - Sheet and strip - 04 mm = a = 6 mm | |
| UNI UNI EN 2696 | EN-Aerospace series. Aluminium alloy AL- P7075 - T6 or T62. Sheet and strip 04 mm ² a ² 6 mm. | |
| UNI UNI EN 2702 | EN-Aerospace series - Aluminium alloy AL-P6061 - T6 or T62 - Drawn or extruded bar and section - a or D &lt; 200 mm | |
| UNI UNI EN 2703 | EN-Aerospace series - Aluminium alloy AL- P2024-T4 or T42 - Clad sheet and strip - 03 mm &lt; = a < = 6 mm | |
| UNI UNI EN 2713-002 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 002: Screened and jacketed - General | |
| UNI UNI EN 2713-003 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 ° C and 2 00 °C - Part 003: Screened (spiral) and jacketed ink jet printable - Product standa | |
| UNI UNI EN 2713-004 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 ° C and 200 °C - Part 004: Screened (braided) and jacketed ink jet printable - Product standar | |
| UNI UNI EN 2713-005 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 005: Screened (spiral) and jacketed CO2 laser printable - Product standard | |
| UNI UNI EN 2713-006 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 006: Screened (braided) and jacketed CO2 laser printable - Product standar | |
| UNI UNI EN 2713-007 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 007: Screened (spiral) and jacketed UV laser printable - Product standard | |
| UNI UNI EN 2713-008 | EN-Aerospace series - Cables electrical single and multicore for general purpose Operating temperatures between - 55 °C a and 200 °C - Part 008: Screened (braided) and jacketed UV laser printable - Product standard | |
| UNI UNI EN 2713-009 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 009: Screened (spiral) and jacketed YAG X3 laser printable - Product stan | |
| UNI UNI EN 2713-010 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 010: Screened (braided) and jacketed YAG X3 laser printable - Product stan | |
| UNI UNI EN 2713-11 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 °C - Part 011: Silver plated copper screened (spiral) and jacketed UV laser printable - Product | |
| UNI UNI EN 2714-002 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 002: Screened and jacketed - General | |
| UNI UNI EN 2714-003 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 003: Screened (spiral) and jacketed ink jet printable Product standard | |
| UNI UNI EN 2714-004 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 004: Screened (braided ) and jacketed ink jet printable - Product standard | |
| UNI UNI EN 2714-005 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 005: Screened (spiral) and jacketed CO2 laser printable - Product standa | |
| UNI UNI EN 2714-006 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 ° C and 260 °C - Part 006: Screened (braided) and jacketed CO2 laser printable - Product stand | |
| UNI UNI EN 2714-008 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 ° C and 260 °C - Part 008: Screened (braided) and jacketed UV laser printable - Product standa | |
| UNI UNI EN 2714-009 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 009: Screened (spiral) and jacketed YAG X3 laser printable - Product stan | |
| UNI UNI EN 2714-010 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 010: Screened (braided) and jacketed YAG X3 laser printable - Product sta | |
| UNI UNI EN 2714-011 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 011: DM family screened (spiral) and jacketed UV laser printable - Produc | |
| UNI UNI EN 2714-012 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 012: DM family screened (braided) and jacketed UV laser printable - Produ | |
| UNI UNI EN 2714-013 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 013: DR family screened (spiral) and jacketed UV laser printable - Produc | |
| UNI UNI EN 2714-7 | EN-Aerospace series - Cables electrical single and multicore for general purpose Operating temperatures between - 55 °C and 260 °C - Part 007: Screened (spiral) and jacketed UV laser printable - - Product standard | |
| UNI UNI EN 2731 | EN-Aerospace series - Magnesium alloy MG- C46001-T6 - Sand casting | |
| UNI UNI EN 2732 | EN-Aerospace series - Magnesium alloy MG- C46001-T6 - Chill casting | |
| UNI UNI EN 27372 | EN-Trade data interchange. Trade data elements directory. | |
| UNI UNI EN 2743 | EN-Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials | |
| UNI UNI EN 2744 | EN-Aerospace series. Non metallic materials. Preferred test temperatures. | |
| UNI UNI EN 2746 | EN-Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method | |
| UNI UNI EN 2747 | EN-Aerospace series - Glass fibre reinforced plastics - Tensile test | |
| UNI UNI EN 27487-2 | EN-Information processing. Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad 19 tpmm (48 tpi) on both sides. Track format A. | |
| UNI UNI EN 27487-3 + A1 | EN-Information processing. Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad 19 tpmm (48 tpi) on both sides. Track format B. | |
| UNI UNI EN 27498 | EN-Information processing systems. Open systems interconnection. Basic reference model. | |
| UNI UNI EN 2752 | EN-Aerospace series. Nuts anchor self locking fixed two lug reduced series with counterbore. Classification: 1100 mpa/235ø c. | |
| UNI UNI EN 2753 | EN-Aerospace series. Nuts anchor self- locking fixed single lug with counterbore in alloy steel cadmium plated MoS2 lubricated. Classification: 1 100 MPa (at ambient temperature)/235 ¡C. | |
| UNI UNI EN 2754 | EN-Aerospace series - Nuts anchor self locking two lug floating with counterbore - Classification: 1 100 MPa/235 °C | |
| UNI UNI EN 2755 | EN-Aerospace series - Bearings spherical plain in corrosion resisting steel with self-lubricating liner - Elevated load at ambient temperature - Technical specification | |
| UNI UNI EN 27779 | EN-Acoustics. Measurement of airborne noise emitted by computer and business equipment. | |
| UNI UNI EN 2781 | EN-Aerospace series - Non-metallic materials - Structural adhesives - Test methods - Determination of the primer thickness | |
| UNI UNI EN 27816-1 | EN-Identification cards. Integrated circuit(s) cards with contacts. Physical characteristics. | |
| UNI UNI EN 27816-2 | EN-Identification cards. Integrated circuit(s) cards with contacts. Dimensions and location of the contacts. | |
| UNI UNI EN 27816-3 - A1 | EN-Identification cards. Integrated circuit(s) cards with contacts. Electronic signals and trasmission protocols. | |
| UNI UNI EN 27816-3/A1 | EN-Identification cards. Integrated circuit(s) cards with contacts. Electronic signals and trasmission protocols. Amendement 1: Protocol type T=1 asynchronous half duplex block transmission protocol. | |
| UNI UNI EN 27816-3/A2 | EN-Identification cards. Integrated circuit(s) cards with contacts. Electronic signals and transmission protocols Amendment 2: Revision of protocol type selection. | |
| UNI UNI EN 2786 | EN-Aerospace series - Electrolytic silver plating of fasteners | |
| UNI UNI EN 2790 | EN-Aerospace series. Rod ends adjustable self-aligning plain bearing with self- lubricating liner and threaded shank with engagement: 15 x thread diameter. Dimensions and loads. | |
| UNI UNI EN 2791 | EN-Aerospace series. Rod ends adjustable single fork and threaded shank with engagement: 15 x thread diameter. Dimensions and loads. | |
| UNI UNI EN 2792 | EN-Aerospace series. Rod ends adjustable double fork and threaded shank with engagement: 15 x thread diameter. Dimensions and loads. | |
| UNI UNI EN 2794-001 | EN-Aerospace series - Circuit breakers single-pole temperature compensated rated currents 20 A to 50 A - Technical specification | |
| UNI UNI EN 2794-003 | EN-Aerospace series - Circuit breakers single-pole temperature compensated rated currents 20 A to 50 A - Metric thread terminals - Product standard | |
| UNI UNI EN 2794-004 | EN-Aerospace series - Circuit breakers single-pole temperature compensated rated currents 20 A to 50 A - UNC thread terminals - Product standard | |
| UNI UNI EN 27942 | EN-Information processing system. Computer graphics Graphical Kernel System (GKS). Functional description (ISO 7942-1985 1st edition 1985-08-15). | |
| UNI UNI EN 27982-1 | EN-Bank telecommunication. Funds transfer messages. Vocabulary and data elements. | |
| UNI UNI EN 2802 | EN-Aerospace series - Aluminium alloy AL- P7475-T761 - Sheet and strip - 06 mm &lt; = a < = 6 mm | |
| UNI UNI EN 2803 | EN-Aerospace series - Aluminium alloy AL- P7475-T761 - Clad sheet and strip - 1 mm &lt; = a < = 6 mm | |
| UNI UNI EN 28064 | EN-Information processing. Reels for 127 mm (0.5 in) wide magnetic tapes. Sizes 16 18 and 22. | |
| UNI UNI EN 2808 | EN-Aerospace series - Anodizing of titanium and titanium alloys | |
| UNI UNI EN 2809 | EN-Aerospace series - Nuts hexagon slotted/castellated reduced height normal across flats in heat resisting steel silver plated - Classification: 900 MPa (at ambient temperature)/650 °C | |
| UNI UNI EN 2810 | EN-Aerospace series - Nuts hexagon slotted/castellated reduced height normal across flats in heat resisting steel passivated - Classification: 900 MPa (at ambient temperature)/650°C | |
| UNI UNI EN 2821 | EN-Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D &lt; 200 mm - Rm < 1 310 Mpa | |
| UNI UNI EN 2828 | EN-Aerospace series. Adhesion test for metallic coatings by burnishing. | |
| UNI UNI EN 2829 | EN-Aerospace series. Adhesion test for metallic coatings by shot peening. | |
| UNI UNI EN 2830 | EN-Aerospace series. Adhesion test for metallic coatings by shearing action. | |
| UNI UNI EN 2831 | EN-Aerospaces series. Hydrogen embrittlement of steels. Test by slow bending. |