UNI - Chemicals Petroleum Products Paints Adhesives and Additives Collection
This collection contains documents from the following standards organization(s): Ente Nazionale Italiano di Unificazione
| UNI UNI EN 1918-4 | EN-Gas supply systems - Underground gas storage - Functional recommendations for storage in rock caverns | |
| UNI UNI EN 1918-5 | EN-Gas supply systems - Underground gas storage - Functional recommendations for surface facilities | |
| UNI UNI EN 1939 | EN-Self adhesive tapes - Determination of peel adhesion properties | |
| UNI UNI EN 1939 | EN-Self adhesive tapes - Measurement of peel adhesion from stainless or from its own backing. | |
| UNI UNI EN 1940 | EN-Self adhesive tapes - Measurement of breaking strength | |
| UNI UNI EN 1941 | EN-Self adhesive tapes. Measurement of elongation at break. | |
| UNI UNI EN 1942 | EN-Self adhesive tapes - Measurement of thickness | |
| UNI UNI EN 1942 | EN-Self adhesive tapes - Measurement of thickness | |
| UNI UNI EN 1942 | EN-Self adhesive tapes - Measurement of thickness | |
| UNI UNI EN 1943 | EN-Self adhesive tapes. Measurement of static shear adhesion. | |
| UNI UNI EN 1943 | EN-Self adhesive tapes - Measurement of static shear adhesion | |
| UNI UNI EN 1944 | EN-Self adhesive tapes. Measurement of unwind adhesion at low speed. | |
| UNI UNI EN 1945 | EN-Self adhesive tapes - Measurement of quick stick | |
| UNI UNI EN 1953 | EN-Atomising and spraying equipment for coating materials - Safety requirements | |
| UNI UNI EN 1953 | EN-Atomising and spraying equipment for coating materials - Safety requirements | |
| UNI UNI EN 1965-1 | EN-Structural adhesives - Corrosion - Determination and classification of corrosion to a copper substrate | |
| UNI UNI EN 1965-2 | EN-Structural adhesives - Corrosion - Determination and classification of corrosion to a brass substrate | |
| UNI UNI EN 1966 | EN-Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method | |
| UNI UNI EN 1966 | EN-Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method | |
| UNI UNI EN 1967 | EN-Structural adhesives - Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method | |
| UNI UNI EN 20-1 | EN-Wood preservatives. Determination of the protective effectiveness against Lyctus brunneus (Stephens). Application by surface treatment (Laboratory method). | |
| UNI UNI EN 20-2 | EN-Wood preservatives. Determination of the protective effectiveness against Lyctus brunneus (Stephens). Application by impregnation (Laboratory method). | |
| UNI UNI EN 204 | EN-Classification of thermoplastic wood adhesives for non-structural applications | |
| UNI UNI EN 204 | EN-Classification of non-structural adhesives for joining of wood and derived timber product. | |
| UNI UNI EN 205 | EN-Test methods for wood adhesives for non- structural applications. Determination of tensile strength of lap joint. | |
| UNI UNI EN 205 | EN-Adhesives - Wood adhesives for non- structural applications - Determination of tensile shear strength of lap joints | |
| UNI UNI EN 212 | EN-Wood preservatives - General guidance to sampling and preparation for analysis of wood preservatives and treated timber | |
| UNI UNI EN 212 | EN-Wood preservatives. Guide to sampling and preparation of woo preservatives and treated timber for analysis. | |
| UNI UNI EN 21512 | EN-Paints and varnishes. Sampling of products in liquid or paste form | |
| UNI UNI EN 21524 | EN-Paints and varnishes. Determination of fineness of grind. | |
| UNI UNI EN 22 | EN-Wood preservative. Determination of eradicant action against hylotrupes bajulus (linnaeus) larvae (laboratory method). | |
| UNI UNI EN 22592 | EN-Petroleum products. Determination of flash and fire points. Cleveland open cup method. | |
| UNI UNI EN 22719 | EN-Petroleum products and lubricants. Determination of flash point. Pensky- Martens closed cup method. | |
| UNI UNI EN 228 | EN-Automotive fuels - Unleaded petrol - Requirements and test methods | |
| UNI UNI EN 228 | EN-Automotive fuels - Unleaded petrol - Requirements and test methods | |
| UNI UNI EN 228 | EN-Automotive fuels - Unleaded petrol - Requirements and test methods | |
| UNI UNI EN 228 | EN-Automotive fuels - Unleaded petrol - Requirements and test methods | |
| UNI UNI EN 23015 | EN-Petroleum products. Determination of cloud point. | |
| UNI UNI EN 23270 | EN-Paints and varnishes and their raw materials. Temperatures and humidities for conditioning and testing. | |
| UNI UNI EN 237 | EN-Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry | |
| UNI UNI EN 237 | EN-Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry | |
| UNI UNI EN 238 | EN-Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry | |
| UNI UNI EN 238 | EN-Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry | |
| UNI UNI EN 241 | EN-Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method | |
| UNI UNI EN 24260 | EN-Petroleum products and hydrocarbons. Determination of sulfur content. Wickbold combustion system. | |
| UNI UNI EN 24624 | EN-Paints and varnishes. Pull-off test. | |
| UNI UNI EN 25163 | EN-Motor and aviation-type fuels. Determination of knock characteristics. Motor method. | |
| UNI UNI EN 25164 | EN-Motors fuels. Determination of knock characteristics. Research method. | |
| UNI UNI EN 252 | EN-Field test method for determining the relative protective effectiveness of a wood preservative in ground contact. | |
| UNI UNI EN 26246 | EN-Petroleum products/ Motor gasoline and aviation fuels. Determination of existent gum. Jet evaporation method. | |
| UNI UNI EN 268 | EN-Propellants for commercial ammunition. Requirements and test methods. | |
| UNI UNI EN 26922 | EN-Adhesives. Determination of tensile strenght of butt joints. | |
| UNI UNI EN 273 | EN-Wood preservatives. Determination of the curative action against Lyctus brunneus (Stephens) (Laboratory method). | |
| UNI UNI EN 275 | EN-Wood preservatives - Determination of the protective effectiveness against marine borers | |
| UNI UNI EN 27941 | EN-Commercial promane and butane. Analysis by gas chromatography | |
| UNI UNI EN 28510-1 | EN-Adhesives. Peel test a flexible-bonded- to-rigid test specimen assembly. 90° peel. | |
| UNI UNI EN 28510-2 | EN-Adhesives. Peel test for a flexible- bonded-to-rigid test specimen assembly. 180° peel. | |
| UNI UNI EN 29117 | EN-Paints and varnishes. Determination of through-dry state and through-dry time. Method of test | |
| UNI UNI EN 29142 | EN-Adhesives. Guide to the of standard laboratory ageing conditions for testing bonded joints. | |
| UNI UNI EN 29653 | EN-Adhesives. Test method for shear impact strenght of adhesives bonds. | |
| UNI UNI EN 301 | EN-Adhesives phenolic and aminoplastic for load-bearing timber structures - Classification and performance requirements | |
| UNI UNI EN 301 | EN-Adhesives phenolic and aminoplastic for load-bearing timber structures - Classification and performance requirements | |
| UNI UNI EN 301 | EN-Adhesives phenolic and aminoplastic for load bearing timber structures. Classification and performance requirement | |
| UNI UNI EN 302-1 | EN-Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of bond strength in longitudinal tensile shear strength | |
| UNI UNI EN 302-1 | EN-Adhesives for load-bearing timber structures. Test methods. Determination of bond strength in longitudinal tensile shear | |
| UNI UNI EN 302-2 | EN-Adhesives for load-bearing timber structures. Test methods. Determinatione of the resistance to delamination (Laboratory method). | |
| UNI UNI EN 302-2 | EN-Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination | |
| UNI UNI EN 302-3 | EN-Adhesives for load-bearing structures. Test methods. Determination of the effect of acid damage to wood fibres temperature and humidity cycling on the transverse tensile strength | |
| UNI UNI EN 302-3 | EN-Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength | |
| UNI UNI EN 302-3 | EN-Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength | |
| UNI UNI EN 302-4 | EN-Adhesives for load-bearing structures. Test methods. Determination of the effect of wood shrinkage on the shear strength. | |
| UNI UNI EN 302-4 | EN-Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength | |
| UNI UNI EN 302-6 | EN-Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the conventional pressing time | |
| UNI UNI EN 302-7 | EN-Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the conventional working life | |
| UNI UNI EN 330 | EN-Wood preservatives. Field test method for determining the relative protective effectiveness of a wood preservative for use under a coating and exposed out of ground contact: L-joint method. | |
| UNI UNI EN 335-1 | EN-Durability of wood and wood-based products - Definition of use classes - Part 1: General | |
| UNI UNI EN 335-1 | EN-Durability of wood and wood-based products - Definition of use classes - Part 1: General | |
| UNI UNI EN 335-2 | EN-Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood | |
| UNI UNI EN 335-2 | EN-Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood |