SNV - Process Engineering Collection
This collection contains documents from the following standards organization(s): Schweizerische Normen-Vereinigung
| SNV SN EN 12475-4 | EN-Classification of dense shaped refractory products - Part 4: Special products | |
| SNV SN EN 12479 | EN-Wood poles for overhead lines - Sizes - Methods of measurement and permissible deviations | |
| SNV SN EN 12479*SIA 164.154 | EN-Wood poles for overhead lines - Sizes - Methods of measurement and permissible deviations | |
| SNV SN EN 12483 | EN-Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests | |
| SNV SN EN 12493 | EN-Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture | |
| SNV SN EN 12495 | EN-Cathodic protection for fixed steel offshore structures | |
| SNV SN EN 12502-1 | EN-Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General | |
| SNV SN EN 12502-1 | EN-Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General | |
| SNV SN EN 12502-1 | EN-Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General | |
| SNV SN EN 12502-2 | EN-Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 2: Influencing factors for copper and copper alloys | |
| SNV SN EN 12502-2 | EN-Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 2: Influencing factors for copper and copper alloys | |
| SNV SN EN 12502-2 | EN-Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 2: Influencing factors for copper and copper alloys | |
| SNV SN EN 12502-3 | EN-Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 3: Influencing factors for hot dip galvanised ferrous materials | |
| SNV SN EN 12502-3 | EN-Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 3: Influencing factors for hot dip galvanised ferrous materials | |
| SNV SN EN 12502-3 | EN-Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 3: Influencing factors for hot dip galvanised ferrous materials | |
| SNV SN EN 12502-4 | EN-Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 4: Influencing factors for stainless steels | |
| SNV SN EN 12502-4 | EN-Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 4: Influencing factors for stainless steels | |
| SNV SN EN 12502-4 | EN-Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 4: Influencing factors for stainless steels | |
| SNV SN EN 12502-5 | EN-Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron unalloyed and low alloyed | |
| SNV SN EN 12502-5 | EN-Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron unalloyed and low alloyed | |
| SNV SN EN 12502-5 | EN-Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron unalloyed and low alloyed | |
| SNV SN EN 12505 | EN-Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements | |
| SNV SN EN 12505+A1 | EN-Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements | |
| SNV SN EN 12505+A1 | EN-Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements | |
| SNV SN EN 12509 | EN-Timber poles for overhead lines - Test methods - Determination of modulus of elasticity bending strength density and moisture content | |
| SNV SN EN 12509*SIA 164.157 | EN-Timber poles for overhead lines - Test methods - Determination of modulus of elasticity bending strength density and moisture content | |
| SNV SN EN 1251-1 | EN-Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements | |
| SNV SN EN 1251-2 | EN-Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design fabrication inspection and testing | |
| SNV SN EN 1251-2/AC | EN-Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design fabrication inspection and testing-Corrigendum AC | |
| SNV SN EN 1251-2/AC | EN-Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design fabrication inspection and testing | |
| SNV SN EN 1251-2/AC | EN-Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design fabrication inspection and testing; Corrigendum AC | |
| SNV SN EN 1251-3 | EN-Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements | |
| SNV SN EN 12510 | EN-Wood poles for overhead lines - Strength grading criteria | |
| SNV SN EN 12510*SIA 164.155 | EN-Wood poles for overhead lines - Strength grading criteria | |
| SNV SN EN 12511 | EN-Wood poles for overhead lines - Determination for characteristic values | |
| SNV SN EN 12511*SIA 164.156 | EN-Wood poles for overhead lines - Determination for characteristic values | |
| SNV SN EN 12516-1 | EN-Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells | |
| SNV SN EN 12516-1 | EN-Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells | |
| SNV SN EN 12516-1 | EN-Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells | |
| SNV SN EN 12516-1/AC | EN-Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells; Corrigendum AC | |
| SNV SN EN 12516-2 | EN-Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells | |
| SNV SN EN 12516-2 | EN-Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells | |
| SNV SN EN 12516-2 | EN-Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells | |
| SNV SN EN 12516-3 | EN-Valves - Shell design strength - Part 3: Experimental method | |
| SNV SN EN 12516-3 | EN-Valves - Shell design strength - Part 3: Experimental method | |
| SNV SN EN 12516-3 | EN-Valves - Shell design strength - Part 3: Experimental method | |
| SNV SN EN 12516-3/AC | EN-Valves - Shell design strength - Part 3: Experimental method; Corrigendum AC | |
| SNV SN EN 12516-3/AC | EN-Valves - Shell design strength - Part 3: Experimental method; Corrigendum AC | |
| SNV SN EN 12516-3/AC | EN-Valves - Shell design strength - Part 3: Experimental method; Corrigendum AC | |
| SNV SN EN 1252-1 | EN-Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below - 80°C | |
| SNV SN EN 1252-1/AC | EN-Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80 °C; Amendment AC | |
| SNV SN EN 1252-2 | GE-Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80 °C and -20 °C | |
| SNV SN EN 1252-2 | EN-Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80 °C and -20 °C | |
| SNV SN EN 12526 | EN-Castors and wheels - Vocabulary recommended symbols and multilingual dictionary | |
| SNV SN EN 12527 | EN-Castors and wheels - Test methods and apparatus | |
| SNV SN EN 12530 | EN-Castors and wheels - Castors and wheels for manually propelled institutional applications | |
| SNV SN EN 12532 | EN-Castors and wheels - Castors and wheels for applications up to 11 m/s (4 km/h) | |
| SNV SN EN 12533 | EN-Castors and wheels - Castors and wheels for applications over 11 m/s (4 km/h) and up to 44 m/s (16 km/h) | |
| SNV SN EN 1254-1 | EN-Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes | |
| SNV SN EN 1254-2 | EN-Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes | |
| SNV SN EN 1254-4 | EN-Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends | |
| SNV SN EN 1254-4/AC | EN-Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends; Amendment AC | |
| SNV SN EN 1254-4/AC | EN-Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends; Amendment AC | |
| SNV SN EN 1254-4/AC | EN-Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends; Amendment AC | |
| SNV SN EN 1254-5 | EN-Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes | |
| SNV SN EN 12542 | EN-Static welded steel cylindrical tanks serially produced for the storage of Liquified Petroleum Gas (LPG) having a volume not greater than 13 m³ and for installation above ground - Design and manufacture | |
| SNV SN EN 12542/A1 | EN-Static welded steel cylindrical tanks serially produced for the storage of Liquified Petroleum Gas (LPG) having a volume not greater than 13 m³ and for installation above ground - Design and manufacture | |
| SNV SN EN 12542/A1 | EN-Static welded steel cylindrical tanks serially produced for the storage of Liquified Petroleum Gas (LPG) having a volume not greater than 13 m<(hoch)3> and for installation above ground - Design and manufacture | |
| SNV SN EN 12542/A1 | EN-Static welded steel cylindrical tanks serially produced for the storage of Liquified Petroleum Gas (LPG) having a volume not greater than 13 m³ and for installation above ground - Design and manufacture | |
| SNV SN EN 1255 | EN-Inland navigation vessels - Swing derricks | |
| SNV SN EN 12560-1 | EN-Flanges and their joints - Gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts | |
| SNV SN EN 12560-2 | EN-Flanges and their joints - Gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges | |
| SNV SN EN 12560-2 | EN-Flanges and their joints - Gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges | |
| SNV SN EN 12560-3 | EN-Flanges and their joints - Gaskets for Class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets | |
| SNV SN EN 12560-4 | EN-Flanges and their joints - Gaskets for Class-designated flanges - Part 4: Corrugated flat or grooved metallic and filled metallic gaskets for use with steel flanges | |
| SNV SN EN 12560-5 | EN-Flanges and their joints - Gaskets for Class-designated flanges - Part 5: Metallic ring joint gaskets for use with steel flanges | |
| SNV SN EN 12560-6 | EN-Flanges and their joints - Gaskets for class-designated flanges - Part 6: Covered serrated metal gaskets for uses with steel flanges | |
| SNV SN EN 12560-6 | EN-Flanges and their joints - Gaskets for class-designated flanges - Part 6: Covered serrated metal gaskets for uses with steel flanges | |
| SNV SN EN 12560-6 | EN-Flanges and their joints - Gaskets for class-designated flanges - Part 6: Covered serrated metal gaskets for uses with steel flanges |