SAE - AS Collection
This collection contains documents from the following standards organization(s): SAE International
| SAE AS 8029 | EN-Minimum Performance Standard for Fuel and Oil Quantity Indicating System Components | |
| SAE AS 803 | EN-Igniter Spark Aeronautical Engine (Low Tension) | |
| SAE AS 8031A | EN-Personal Protective Devices for Toxic and Irritating Atmospheres Air Transport Flight Deck (Sedentary) Crewmembers | |
| SAE AS 8032 | EN-AIRCRAFT GENERAL PURPOSE ELECTRICAL WIRE MINIMUM | |
| SAE AS 8033 | EN-Nickel Cadmium Vented Rechargeable Aircraft Batteries (Non-Sealed Maintainable Type) | |
| SAE AS 8034A | EN-(R) Minimum Performance Standard for Airborne Multipurpose Electronic Displays | |
| SAE AS 8036 | EN-Cargo Compartment Fire Detection Instruments | |
| SAE AS 8037A | EN-Minimum Performance Standard for Aircraft Position Lights | |
| SAE AS 8039A | EN-Minimum Performance Standard General Aviation Flight Recorder | |
| SAE AS 8040A | EN-Heater Aircraft Internal Combustion Heat Exchanger Type | |
| SAE AS 8042 | EN-MANIFOLD PRESSURE INSTRUMENTS | |
| SAE AS 8043B | EN-(R) Restraint Systems for Civil Aircraft | |
| SAE AS 8044 | EN-Takeoff Performance Monitor (TOPM) System Airplane Minimum Performance Standard for | |
| SAE AS 8045 | EN-Minimum Performance Standard for Underwater Locating Devices (Acoustic) (Self- Powered) | |
| SAE AS 8046 | EN-Minimum Performance Standard Angle of Attack Equipment | |
| SAE AS 8047 | EN-Performance Standard for Cabin Crew Portable Protective Breathing Equipment for Use During Aircraft Emergencies | |
| SAE AS 8048 | EN-Performance Standard for Passenger Smoke and Toxic Fumes Respiratory Protective Equipment | |
| SAE AS 8049B | EN-Performance Standard for Seats in Civil Rotorcraft Transport Aircraft and General Aviation Aircraft | |
| SAE AS 8054 | EN-AIRBORNE ENGINE VIBRATION MONITORING (EVM) SYSTEM GUIDELINES FOR PERFORMANCE STANDARD FOR | |
| SAE AS 8055 | EN-Minimum Performance Standard for Airborne Head Up Display (HUD) | |
| SAE AS 8056 | EN-Minimum Design and Performance of Airplane Galley In-Flight Carts Containers and Associated Components | |
| SAE AS 8057 | EN-Minimum Design and Performance of Airplane Galley Insert Equipment Electrical/Pressurized | |
| SAE AS 8090 | EN-Mobility Towed Aerospace Ground Equipment General Requirements for | |
| SAE AS 8091 | EN-Adapter Aircraft Jacking Point Design and Installation of-FSC 1730; Should Be Used Instead of MIL-STD-809B Which Was Cancelled on 1 July 1999 | |
| SAE AS 81021A | EN-Copper-Beryllium Alloy (Copper Alloy Numbers C17500 and C17510) Strip | |
| SAE AS 81044 | EN-Wire Electrical Crosslinked Polyalkene Crosslinked Alkane- Imide Polymer or Polyarlyene Insulated Copper or Copper Alloy | |
| SAE AS 81044-A1 | EN-Wire Electrical Crosslinked Polyalkene Crosslinked Alkane- Imide Polymer or Polyarlyene Insulated Copper or Copper Alloy | |
| SAE AS 81044-A2 | EN-Wire Electrical Crosslinked Polyalkene Crosslinked Alkane-Imide Polymer or Polyarlyene Insulated Copper or Copper Alloy | |
| SAE AS 81044/10 | EN-WIRE ELECTRIC CROSSLINKED POLYALKENE INSULATED SILVER-COATED HIGH STRENGTH COPPER ALLOY MEDIUM WEIGHT 600-VOLT 150°C | |
| SAE AS 81044/11 | EN-Wire Electric Crosslinked Polyalkene Insulated Silver-Coated Copper Light Weight 600-Volt 150 Degrees Celsius | |
| SAE AS 81044/12 | EN-Wire Electric Crosslinked Polyalkene Insulated Tin-Coated Copper Light Weight 600-Volt 150 Degrees C-FSC 6145 | |
| SAE AS 81044/13 | EN-Wire Electric Crosslinked Polyalkene Insulated Silver-Coated High Strength Copper Alloy Light Weight 600-Volt 150 Degrees C | |
| SAE AS 81044/5 | EN-Wire Electric Crosslinked Polyalkene Insulated Silver-Coated Copper Normal Weight 600-Volt 150 Degrees Celsius | |
| SAE AS 81044/5-A1 | EN-Wire Electric Crosslinked Polyalkene Insulated Silver-Coated Copper Normal Weight 600-Volt 150 Degrees C | |
| SAE AS 81044/6 | EN-Wire Electric Crosslinked Polyalkene Insulated Tin-Coated Copper Normal Weight 600-Volt 150 Degrees C-FSC 6145 | |
| SAE AS 81044/6-A1 | EN-Wire Electric Crosslinked Polyalkene Insulated Tin-Coated Copper Normal Weight 600-Volt 150°C | |
| SAE AS 81044/7 | EN-WIRE ELECTRIC CROSSLINKED POLYALKENE INSULATED SILVER-COATED HIGH STRENGTH COPPER ALLOY NORMAL WEIGHT 600-VOLT 150°C | |
| SAE AS 81044/7-A1 | EN-Wire Electric Crosslinked Polyalkene Insulated Silver-Coated High Strength Copper Alloy Normal Weight 600-Volt 150°C | |
| SAE AS 81044/8 | EN-WIRE ELECTRIC CROSSLINKED POLYALKENE INSULATED SILVER-COATED COPPER MEDIUM WEIGHT 600-VOLT 150°C | |
| SAE AS 81044/8-A1 | EN-WIRE ELECTRIC CROSSLINKED POLYALKENE INSULATED SILVER-COATED COPPER MEDIUM WEIGHT 600-VOLT 150 DEGREES C | |
| SAE AS 81044/9 | EN-Wire Electric Crosslinked Polyalkene Insulated Tin-Coated Copper Medium Weight 600-Volt 150 Degrees C-FSC 6145 | |
| SAE AS 81044/9-A1 | EN-Wire Electric Crosslinked Polyalkene Insulated Tin-Coated Copper Medium Weight 600-Volt 150 Degrees C | |
| SAE AS 81099 | EN-Electric Devices Simple General Specification For-FSC 6150 | |
| SAE AS 81366A | EN-Boundary Layer Control System; Pressure | |
| SAE AS 814A | EN-Spark Igniter Outline .750-20 Thread Mounting | |
| SAE AS 815 | EN-SPARK IGNITER OUTLINE/.500-20 THREADED MOUNTING | |
| SAE AS 81531 | EN-Marking of Electrical Insulating Materials-FSC 6145; Should be Used for New Design Instead of MIL-M-81531 Which Was Inactivated for New Design on September 30 1998 | |
| SAE AS 81550 | EN-Insulating Compound Electrical Embedding Reversion Resistant Silicone-FSC 5970 | |
| SAE AS 81582 | EN-Connectors Electrical Bayonet Coupling Environment Resisting Umbilical General Specification For-Amendment 1: 09/2004 | |
| SAE AS 81582-A2 | EN-Connectors Electrical Bayonet Coupling Environment Resisting Umbilical General Specification For | |
| SAE AS 81582/1 | EN-CONNECTORS ELECTRIC BAYONET COUPLING UMBILICAL RECEPTACLE JAM NUT MOUNTING RFI SHIELDED CRIMP CONTACT CLASS E-FSC 5935 | |
| SAE AS 81582/10 | EN-CONNECTORS ELECTRICAL BAYONET COUPLING ENVIRONMENT RESISTING UMBILICAL DUMMY STOWAGE RECEPTACLE-FSC 5935 | |
| SAE AS 81582/2 | EN-CONNECTOR PLUG ELECTRIC BAYONET COUPLING LANYARD RELEASE RFI SHIELDED CRIMP-TYPE CONTACTS CLASS E-FSC 5935; Amendment 1: 09/2004 | |
| SAE AS 81582/4 | EN-CONNECTOR ADAPTER RFI SHIELDED CABLE TO ELECTRIC CONNECTOR-FSC 5935 | |
| SAE AS 81582/5 | EN-CONNECTOR ADAPTER RIGHT ANGLE RFI SHIELDED ELECTRIC CONNECTOR TO ELECTRIC CONNECTOR-FSC 5935 | |
| SAE AS 81582/6 | EN-CONNECTOR ADAPTER ASSEMBLY UMBILICAL CABLE TO STORES INTERFACE LANYARD RELEASE-FSC 5935 | |
| SAE AS 81582/7 | EN-CONNECTOR ADAPTER ASSEMBLY UMBILICAL CABLE TO STORES INTERFACE LANYARD RELEASE-FSC 5935 | |
| SAE AS 81582/8 | EN-CONNECTOR ADAPTER ASSEMBLY UMBILICAL CABLE TO STORES INTERFACE LANYARD RELEASE-FSC 5935 | |
| SAE AS 81582/9 | EN-CONNECTORS ELECTRICAL BAYONET COUPLING ENVIRONMENT RESISTING UMBILICAL CAPS PROTECTIVE-FSC 5935 | |
| SAE AS 81587 | EN-Timer Assembly Rain Repellent-FSC 6630; Should Be Used Instead of MIL-T-81587A(AS) Which Was Cancelled on 20 June 2000 | |
| SAE AS 81659 | EN-Connectors Electrical Rectangular Crimp Contacts General Specification For | |
| SAE AS 81659-A1 | EN-Connector Electrical Rectangular Crimp Contacts General Specification For | |
| SAE AS 81659-A2 | EN-Connectors Electrical Rectangular Crimp Contacts General Specification For | |
| SAE AS 81659/29 | EN-CONNECTORS ELECTRICAL RECTANGULAR PLUG CRIMP CONTACTS (SINGLE INSERT TYPE II CLASS 1 (-65°C TO +125°C) SERIES 2 SHELL DESIGNATOR A)-FSC 5935 | |
| SAE AS 81659/31 | EN-CONNECTORS ELECTRICAL RECTANGULAR RECEPTACLE CRIMP CONTACTS (SINGLE INSERT TYPE II CLASS 1 (-65°C TO +125°C) SERIES 2 SHELL DESIGNATOR A)-FSC 5935 | |
| SAE AS 81659/33 | EN-CONNECTORS ELECTRICAL RECTANGULAR PLUG CRIMP CONTACTS (DUAL INSERT TYPE II CLASS 1 (-65°C TO +125°C) SERIES 2 SHELL DESIGNATOR A)-FSC 5935 | |
| SAE AS 81659/35 | EN-CONNECTORS ELECTRICAL RECTANGULAR RECEPTACLE CRIMP CONTACTS (DUAL INSERT TYPE II CLASS 1 (-65°C TO +125°C) SERIES 2 SHELL DESIGNATOR A)-FSC 5935 | |
| SAE AS 81659/37 | EN-CONNECTORS ELECTRICAL RECTANGULAR PLUG CRIMP CONTACTS (TRIPLE INSERT TYPE II CLASS 1 (-65°C TO +125°C) SERIES 2 SHELL DESIGNATOR A)-FSC 5935 | |
| SAE AS 81659/39 | EN-CONNECTORS ELECTRICAL RECTANGULAR RECEPTACLE CRIMP CONTACTS (TRIPLE INSERT TYPE II CLASS 1 (-65°C TO +125°C) SERIES 2 SHELL DESIGNATOR A)-FSC 5935 | |
| SAE AS 81659/41 | EN-CONNECTORS ELECTRICAL RECTANGULAR PLUG CRIMP CONTACTS (QUADRUPLE INSERT TYPE II CLASS 1 (-65°C TO +125°C) SERIES 2 SHELL DESIGNATOR A)-FSC 5935 | |
| SAE AS 81659/43 | EN-CONNECTORS ELECTRICAL RECTANGULAR RECEPTACLE CRIMP CONTACTS (QUADRUPLE INSERT TYPE II CLASS 1 (-65°C TO +125°C) SERIES 2 SHELL DESIGNATOR A)-FSC 5935 | |
| SAE AS 81659/53 | EN-CONNECTORS ELECTRICAL RECTANGULAR PLUG ENVIRONMENT RESISTANT CRIMP CONTACTS QUADRUPLE INSERT TYPE II CLASS 1 (-65°C TO +125°C) SERIES 2 SHELL DESIGNATOR B-FSC 5935 | |
| SAE AS 81659/56 | EN-CONNECTORS ELECTRICAL RECTANGULAR RECEPTACLE ENVIRONMENT RESISTANT CRIMP CONTACTS TRIPLE INSERT TYPE II CLASS 2 (-65°C TO +200°C) SERIES 2 SHELL DESIGNATOR B-FSC 5935 | |
| SAE AS 81659/57 | EN-CONNECTORS ELECTRICAL RECTANGULAR PLUG ENVIRONMENT RESISTANT CRIMP CONTACTS QUADRUPLE INSERT TYPE II CLASS 1 (-65°C TO +125°C) SERIES 2 SHELL DESIGNATOR B-FSC 5935 | |
| SAE AS 81659/61 | EN-CONNECTORS ELECTRICAL RECTANGULAR RECEPTACLE CRIMP CONTACTS (SINGLE INSERT TYPE III CLASS 1 (-65°C TO +125°C) SERIES 2 SHELL DESIGNATOR A)-FSC 5935; Amendment 1 - May 2005 | |
| SAE AS 81659/62 | EN-CONNECTORS ELECTRICAL RECTANGULAR RECEPTACLE CRIMP CONTACTS (DUAL INSERT TYPE III CLASS 1 (-65°C TO +125°C) SERIES 2 SHELL DESIGNATOR A)-FSC 5935 | |
| SAE AS 81659/63 | EN-CONNECTORS ELECTRICAL RECTANGULAR RECEPTACLE CRIMP CONTACTS (TRIPLE INSERT TYPE III CLASS 1 (-65°C TO +125°C) SERIES 2 SHELL DESIGNATOR A)-FSC 5935 | |
| SAE AS 81659/64 | EN-CONNECTORS ELECTRICAL RECTANGULAR RECEPTACLE CRIMP CONTACTS (QUADRUPLE INSERT TYPE III CLASS 1 (-65°C TO +125°C) SERIES 2 SHELL DESIGNATOR A)-FSC 5935 | |
| SAE AS 81659/65 | EN-CONNECTORS ELECTRICAL RECTANGULAR PLUG CRIMP CONTACTS (SINGLE INSERT TYPE IV CLASS 1 (-65°C TO +125°C) SERIES 2 SHELL DESIGNATOR A)-FSC 5935 |