SAE - AMS Collection
This collection contains documents from the following standards organization(s): SAE International
| SAE AMS 3571/5B | EN-Resin Polyether Urethane (EU) Casting Flexible Solid Unfilled 85 Durometer "A" | |
| SAE AMS 3571/6B | EN-Resin Polyether Urethane (EU) Casting Flexible Solid Unfilled 95 Durometer "A" | |
| SAE AMS 3571/7B | EN-Resin Polyether Urethane (EU) Casting Flexible Solid Unfilled 55 Durometer "D" | |
| SAE AMS 3571/8B | EN-Resin Polyether Urethane (EU) Casting Flexible Solid Unfilled 65 Durometer "D" | |
| SAE AMS 3571/9B | EN-Resin Polyether Urethane (EU) Casting Flexible Solid Unfilled 75 Durometer "D" | |
| SAE AMS 3571B | EN-Resin Polyether Urethane (EU) Casting Flexible Solid Unfilled-FSC 9320 | |
| SAE AMS 3572B | EN-Resin Polyurethane Foam- in-Place Rigid | |
| SAE AMS 3573B | EN-Resin Polyurethane (EU) Casting Polyether-Type Flexible Solid Low-Temperature Resistant 80 to 90 | |
| SAE AMS 3574A | EN-POLYURETHANE FOAM-IN-PLACE RIGID CLOSED CELL FOR HELMET LINERS | |
| SAE AMS 3579D | EN-Plastic Tubing Electrical Insulation Non-Crosslinked Polyvinyl Chloride Flexible Heat Shrinkable 1.6 to 1 Shrink Ratio | |
| SAE AMS 3580D | EN-CAST RODS TUBES AND SHAPES METHYL METHACRYLATE PLASTIC | |
| SAE AMS 3581C | EN-CAST RODS TUBES AND SHAPES METHYL METHACRYLATE PLASTIC HEAT RESISTANT | |
| SAE AMS 3582A | EN-Plastic Tubing Electrical Insulation Crosslinked Polyvinyl Chloride Flexible Heat Shrinkable 2 to 1 Shrink Ratio | |
| SAE AMS 3583D | EN-PLASTIC TUBING ELECTRICAL INSULATION CROSSLINDED POLYVINYL CHLORIDE SEMI-RIGID HEAT SHRINKABLE 2 TO 1 SHRINK RATIO | |
| SAE AMS 3584D | EN-Plastic Tubing Electrical Insulation Polytetrafluoroethylene Heat Shrinkable Overexpanded) | |
| SAE AMS 3585 | EN-PLASTIC TUBING ELECTRICAL INSULATION POLYTETRAFLUOROETHYLENE | |
| SAE AMS 3587D | EN-Plastic Tubing Electrical Insulation Irradiated Polyolefin Pigmented Very Flexible Heat- Shrinkable Low Recovery Temperature 2 to 1 Shrink Ratio | |
| SAE AMS 3588D | EN-Plastic Tubing Electrical Insulation Irradiated Polyolefin Clear Very Flexible Heat-Shrinkable 2 to 1 Shrink Ratio | |
| SAE AMS 3589 | EN-PLASTIC TUBING ELECTRL. INSULTN. RESIN BONDED | |
| SAE AMS 3590E | EN-PLASTIC SHEET COPPER FACED PAPER REINFORCED PHENOLIC RESIN | |
| SAE AMS 3591C | EN-POLYETHYLENE TEREPHTHALATE PLASTIC TUBING ELECTRICAL INSULATION - THERMALLY WELDED HEAT SHRINKABLE 1.6 TO 1 SHRINK RATIO | |
| SAE AMS 3593A | EN-Tubing Plastic Electrical Insulation Irradiated Polyvinylidene Fluoride Semi-Rigid Heat-Shrinkable Marker Sleeving Grade Low Outgassing | |
| SAE AMS 3598E | EN-Plastic Sheet Copper Faced GTN Glass Fabric Reinforced Polytetrafluoroethylene | |
| SAE AMS 3599A | EN-Plastic Sheet Copper Faced Glass Fabric Reinforced Epoxy Resin Flammability Controlled | |
| SAE AMS 3601D | EN-Plastic Sheet Copper Faced Glass Fabric Reinforced Epoxy Resin Hot Strength Retention | |
| SAE AMS 3603A | EN-(R) Protective Film High Performance Polymeric Pressure Sensitive Adhesive for Aircraft Exterior Applications | |
| SAE AMS 3605F | EN-Plastic Sheet Post- Forming Cotton Fabric Reinforced Phenol- Formaldehyde | |
| SAE AMS 3607F | EN-Plastic Sheet Cotton Fabric Reinforced Phenol-Formaldehyde | |
| SAE AMS 3609D | EN-Methyl Methacrylate Plastic Sheet Heat Resistant | |
| SAE AMS 3610D | EN-Barrier Material Water Vapor Resistant Flexible Transparent | |
| SAE AMS 3611D | EN-Plastic Sheet Polycarbonate General Purpose | |
| SAE AMS 3612B | EN-Polyester Film Electrical Grade General Purpose | |
| SAE AMS 3613C | EN-Film Copper Clad Polyester | |
| SAE AMS 3614B | EN-Polycarbonate Sheet and Parts Optical Grade Coated | |
| SAE AMS 3615E | EN-Plastic Tubing Cotton Fabric Reinforced Phenol-Formaldehyde | |
| SAE AMS 3616C | EN-Resin Polyimide Laminating and Molding High Temperature Resistant 370 Degrees C (700 Degrees F) Unfilled Addition Polymer | |
| SAE AMS 3617D | EN-Nylon Plastic Moldings and Extrusions | |
| SAE AMS 3618A | EN-Resin Polyimide Thermosetting High Heat (290 C (554 F) Resistant) | |
| SAE AMS 3619C | EN-Resin Polyimide Laminating High Temperature Resistant 315 Degrees C (599 Degrees F) | |
| SAE AMS 3620B | EN-PLASTIC MOLDINGS & EXTRUSIONS POLYSTYRENE | |
| SAE AMS 3622D | EN-Plastic Moldings and Extrusions Cellulose Acetate General Purpose ) | |
| SAE AMS 3623D | EN-Tubing Irradiated Polychloroprene Elastomer Electrical Insulation Flexible Heat-Shrinkable 1.750 to 1 Shrink Ratio | |
| SAE AMS 3624D | EN-PLASTIC MOLDINGS AND EXTRUSIONS CELLULOSE ACETATE BUTYRATE | |
| SAE AMS 3625C | EN-Elastomeric Tubing Electrical Insulation Crosslinked Silicone Pigmented Flexible Heat-Shrinkable 1.750 to 1 Shrink Ratio | |
| SAE AMS 3626F | EN-Plastic Moldings and Extrusions Methyl Methacrylate | |
| SAE AMS 3627D | EN-PLASTIC MOLDINGS AND EXTRUSIONS METHYL METHACRYLATE HEAT - RESISTANT | |
| SAE AMS 3628D | EN-Plastic Extrusions and Moldings Polycarbonate General Purpose | |
| SAE AMS 3629B | EN-Polyvinyl Chloride Tubing Extruded High Temperature Electrical Insulation | |
| SAE AMS 3630F | EN-Plastic Extrusions Flexible Polyvinyl Chloride | |
| SAE AMS 3631C | EN-(R) Polyvinyl Chloride (PVC) Plastic Extrusions High Temperature Flexible | |
| SAE AMS 3632E | EN-Tubing Plastic Electrical Insulation Irradiated Polyvinylidene Fluoride Semi-Rigid Heat-Shrinkable 2 to 1 Shrink Ratio | |
| SAE AMS 3633 | EN-PLASTIC TUBING ELECTRICAL INSULATION IRRADIATED | |
| SAE AMS 3634D | EN-Tubing Polyolefin Plastic Electrical Insulation Selectively Crosslinked Semi-Rigid Heat-Shrinkable | |
| SAE AMS 3635D | EN-Plastic Sheet and Strip Modified Vinyl Foamed Closed Cell | |
| SAE AMS 3636G | EN-Tubing Plastic Electrical Insulation Irradiated Polyolefin Pigmented Flexible Heat-Shrinkable 2 to 1 Shrink Ratio | |
| SAE AMS 3637F | EN-Tubing Irradiated Polyolefin Plastic Electrical Insulation Clear Flexible Heat Shrinkable 2 to 1 Shrink Ratio | |
| SAE AMS 3638F | EN-Tubing Irradiated Polyolefin Plastic Electrical Insulation Pigmented Semi-Rigid Heat Shrinkable 2 to 1 Shrink Ratio | |
| SAE AMS 3639F | EN-Tubing Irradiated Polyolefin Plastic Electrical Insulation Clear Semi-Rigid Heat Shrinkable 2 to 1 Shrink Ratio | |
| SAE AMS 3640F | EN-Plastic Moldings Melamine-Formaldehyde Mineral Filled | |
| SAE AMS 3641E | EN-PLASTIC MOLDINGS THERMOSETTING PHENOL/FORMALDEHYDE MACERATED - FABRIC-FILLED | |
| SAE AMS 3642D | EN-Plastic Moldings Laminated Thermosetting Resin Glass Cloth Reinforced Heat Resistant | |
| SAE AMS 3643B | EN-Plastic Moldings Silicone Thermosetting Glass Roving Filled Heat Resistant | |
| SAE AMS 3644/1C | EN-PLASTIC ROD AND BAR POLYIMIDE UNFILLED MOLDED | |
| SAE AMS 3644/2C | EN-PLASTIC ROD AND BAR POLYIMIDE GRAPHITE / PTFE FILLED MOLDED 15/10 | |
| SAE AMS 3644G | EN-Plastic: Polyimide For Molded Rod Bar and Tube Plaque and Formed Parts | |
| SAE AMS 3645C | EN-Polychlorotrifluoroethylene (PCTFE) Compression Molded Heavy Sections Unplasticized | |
| SAE AMS 3646C | EN-Sheet Polychlorotrifluoroethylene (PCTFE) Molded Unplasticized | |
| SAE AMS 3647C | EN-Polyfluoroethylene Propylene Film and Sheet | |
| SAE AMS 3648B | EN-Tubing Polychlorotrifluoroethylene (PCTFE) Unplasticized | |
| SAE AMS 3649C | EN-Film Polychlorotrifluoroethylene (PCTFE) Unplasticized | |
| SAE AMS 3650C | EN-Rods Sheets and Molded Shapes Polychlorotrifluoroethylene (PCTFE) Unplasticized | |
| SAE AMS 3651D | EN-POLYTETRAFLUOROETHYLENE | |
| SAE AMS 3652C | EN-Polytetrafluoroethylene (PTFE) Film Non-Critical Grade | |
| SAE AMS 3653E | EN-Tubing Electrical Insulation Standard Wall Extruded Polytetrafluoroethylene (PTFE) | |
| SAE AMS 3654C | EN-Tubing Electrical Insulation Light Wall Extruded Polytetrafluoroethylene (PTFE) | |
| SAE AMS 3655B | EN-Tubing Electrical Insulation Thin Wall Extruded Polytetrafluoroethylene (PTFE) | |
| SAE AMS 3656G | EN-Polytetrafluoroethylene (PTFE) Extrusions Normal Strength As Sintered | |
| SAE AMS 3657E | EN-Polytetrafluoroethylene (PTFE) Extrusions Premium Strength As Sintered | |
| SAE AMS 3658E | EN-Polytetrafluoroethylene (PTFE) Extrusions Premium Strength Sintered and Stress-Relieved Radiographically Inspected |