SAE - AMS Collection
This collection contains documents from the following standards organization(s): SAE International
| SAE AMS 3217/5B | EN-Test Slabs Fluorosilicone (FVMQ) 55 - 65 | |
| SAE AMS 3217/6A | EN-Test Slabs Phosphonitrilic Fluoroelastomer (FZ) 65 - 75 | |
| SAE AMS 3217/7 | EN-TEST SLABS HIGH STRENGTH FLUOROSILICONE (FVMQ) 55 - 65 | |
| SAE AMS 3217A | EN-Standard Elastomer Stocks Test Slabs | |
| SAE AMS 3218C | EN-Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95 | |
| SAE AMS 3220F | EN-Rubber Synthetic General Purpose Fluid Resistant 55 - 65 | |
| SAE AMS 3222H | EN-Synthetic Rubber Hot Oil Resistant High Swell 45 - 55 | |
| SAE AMS 3224 | EN-Nitrile-Butadiene Rubber Fuel Fire and Ozone Resistant 65 - 75 | |
| SAE AMS 3226G | EN-Acrylonitrile Butadiene (NBR) Rubber Hot Oil and Coolant Resistant Low Swell 45 - 55 | |
| SAE AMS 3227G | EN-Acrylonitrile Butadiene (NBR) Rubber Hot Oil and Coolant Resistant Low Swell 55 - 65 | |
| SAE AMS 3228H | EN-ACRYLONITRILE BUTADIENE (NBR) RUBBER HOT OIL AND COOLANT RESISTANT LOW SWELL 65 - 75 | |
| SAE AMS 3229G | EN-Acrylonitrile Butadiene (NBR) Rubber Hot Oil Resistant Low Swell 75 - 85-Includes Revision F; Reaffirmed Noncurrent November 2003 | |
| SAE AMS 3232N | EN-Asbestos and Synthetic Rubber Sheet Hot Oil Resistant | |
| SAE AMS 3237F | EN-Butyl (IIR) Rubber Phosphate Ester Resistant 35 - 45 | |
| SAE AMS 3238F | EN-Butyl (IIR) Rubber Phosphate Ester Resistant 65 - 75 | |
| SAE AMS 3239F | EN-Butyl (IIR) Rubber Phosphate Ester Resistant 85 - 95 | |
| SAE AMS 3240J | EN-Chloroprene (CR) Rubber Weather Resistant 35 - 45 | |
| SAE AMS 3241H | EN-Chloroprene (CR) Rubber Weather Resistant 55 - 65 | |
| SAE AMS 3242G | EN-Chloroprene (CR) Rubber Weather Resistant 75 - 85 | |
| SAE AMS 3243F | EN-Chloroprene (CR) Rubber Flame Resistant 55 - 65 | |
| SAE AMS 3244G | EN-Chloroprene (CR) Rubber Flame Resistant 65 - 75 | |
| SAE AMS 3248C | EN-(R) Ethylene Propylene (EPM) Rubber Phosphate Ester Resistant 55 - 65 | |
| SAE AMS 3249C | EN-Ethylene Propylene (EPDM) Rubber Hydrazine-Base-Fluid Resistant 75 - 85 | |
| SAE AMS 3250J | EN-Synthetic Rubber and Cork Composition General Purpose Soft | |
| SAE AMS 3251H | EN-Synthetic Rubber and Cork Composition General Purpose Medium | |
| SAE AMS 3253 | EN-Ethylene Propylene Rubber Phosphate Ester Resistant 65 - 75 | |
| SAE AMS 3255A | EN-(R) Sealing Tape Sheet or Gasket Polytetrafluoroethylene Expanded (EPTFE) Oil and Water Resistant | |
| SAE AMS 3258 | EN-Sealing Compound Polythioether for Aircraft Windshields and Canopies for Use up to 300 Degrees F (149 Degrees C) | |
| SAE AMS 3259B | EN-Sealing Compound Polythioether Nonchromated Corrosion Inhibiting for Intermittent Use to 360 Degrees F (182 Degrees C) | |
| SAE AMS 3260C | EN-Ethylene-Propylene-Diene (EPDM) Rubber General Purpose 45 - 55 | |
| SAE AMS 3262 | EN-Sealing Compound Silicon Rubber Two-Part Electrically Conductive and Corrosion Resistant (Nonchromated) for Use from -67 to 500 Degrees F (-55 to 260 Degrees C) | |
| SAE AMS 3263A | EN-Sealing Compound Polythioether Ambient Cure or Immediate Heat Cure For Aircraft Structures Fuel Resistant With Intermittent Use To 400 °F (204 °C) | |
| SAE AMS 3265D | EN-Sealing Compound Polysulfide (T) Rubber Fuel Resistant Non-Chromated Corrosion Inhibiting For Intermittent Use to 360 °F (182 °C) | |
| SAE AMS 3266 | EN-Sealing Compound Polythioether Elastomeric Two Part Electrically Conductive | |
| SAE AMS 3267/1A | EN-Sealing Compound Low Adhesion Corrosion Inhibiting 200 to 600 Poises (20 to 60 Pa.s) 1/2 Hour Application Time (A-1/2) | |
| SAE AMS 3267/2A | EN-Sealing Compound Low Adhesion Corrosion Inhibiting 9 00 to 14 00 Poises (900 to 1400 Pa.s) 1/2 Hour Application Time (B-1/2) | |
| SAE AMS 3267/3A | EN-Sealing Compound Low Adhesion Corrosion Inhibiting 200 to 600 Poises (20 to 60 Pa.s) 2 Hour Application Time (A-2) | |
| SAE AMS 3267/4A | EN-Sealing Compound Low Adhesion Corrosion Inhibiting 9 00 to 14 00 Poises (900 to 1400 Pa.s) 2 Hour Application Time (B-2) | |
| SAE AMS 3267B | EN-Sealing Compound Low Adhesion Corrosion Inhibiting for Removable Panels and Fuel Tank Inspection Plates | |
| SAE AMS 3269B | EN-Sealing Compound Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities High Strength for Intermittent Use to 360 °F (182 °C) | |
| SAE AMS 3270J | EN-Chloroprene (CR) Rubber Sheet Cotton Fabric Reinforced Weather Resistant | |
| SAE AMS 3271A | EN-Cloth Knitted Nylon Stretch Polychloroprene Coated | |
| SAE AMS 3272/1A | EN-Cloth Nylon Polyurethane Coated Plain Weave 6.0 Ounces/Square Yard (200 g/m2) | |
| SAE AMS 3272/2A | EN-Cloth Nylon Polyurethane Coated Plain Weave 4.0 Ounces/Square Yard (135 g/m2) | |
| SAE AMS 3272/3A | EN-Cloth Nylon Polyurethane Coated Plain Weave 9.2 Ounces/Square Yard (310 g/m2) | |
| SAE AMS 3272A | EN-Cloth Nylon Polyurethane Coated Thermally Radio Frequency or Ultrasonically Sealable | |
| SAE AMS 3273E | EN-Chloroprene (CR) Rubber Sheet Nylon Cloth Reinforced Weather Resistant | |
| SAE AMS 3274G | EN-Acrylonitrile Butadiene (NBR) Rubber Sheet and Molded Shapes Nylon Cloth Reinforced Fuel Resistant | |
| SAE AMS 3275C | EN-Sheet Acrylonitrile Butadiene (NBR) Rubber and Non-Asbestos Fiber Fuel and Oil Resistant | |
| SAE AMS 3276E | EN-Sealing Compound Integral Fuel Tanks and General Purpose Intermittent Use to 360 °F (182 °C) | |
| SAE AMS 3277E | EN-Sealing Compound Polythioether Rubber Fast Curing for Integral Fuel Tanks and General Purpose Intermittent Use to 360 Degrees F (182 Degrees C) | |
| SAE AMS 3278A | EN-Sealing and Coating Compound: Polyurethane (PUR) Fuel Resistant High Tensile Strength / Elongation For Integral Fuel Tanks / Fuel Cavities / General Purpose | |
| SAE AMS 3279C | EN-Sealing Compound Sprayable For Integral Fuel Tanks and Fuel Cell Cavities For Intermittent Use to 350 °F (177 °C) | |
| SAE AMS 3281D | EN-Sealing Compound Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F (182 °C) | |
| SAE AMS 3283A | EN-Sealing Compound Polysulfide Non-Curing Groove Injection Temperature and Fuel Resistant | |
| SAE AMS 3284A | EN-Sealing Compound Low Adhesion for Removable Panels and Fuel Tank Inspection Plates | |
| SAE AMS 3285E | EN-Felt Back Check White 100% Wool | |
| SAE AMS 3286E | EN-Felt Firm Pad White 100% Wool | |
| SAE AMS 3287 | EN-FELT (BACK CHECK) GRAY (95% WOOL) | |
| SAE AMS 3296B | EN-DIGLYCIDYL ESTER RESIN | |
| SAE AMS 3301G | EN-Silicone Rubber General Purpose 40 Durometer | |
| SAE AMS 3302G | EN-Silicone Rubber General Purpose 50 Durometer | |
| SAE AMS 3303J | EN-Silicone Rubber General Purpose 60 Durometer | |
| SAE AMS 3304G | EN-Silicone Rubber General Purpose 70 Durometer | |
| SAE AMS 3305H | EN-Silicone Rubber General Purpose 80 Durometer | |
| SAE AMS 3306B | EN-Rubber Silicone 1200 psi (8.27 MPa) High Modulus 55 - 65 | |
| SAE AMS 3307D | EN-Rubber Silicone (VMQ) Low Compression Set Non-Oil-Resistant 65 - 75 | |
| SAE AMS 3310 | EN-Rubber Silicone - Flame Retardant Low Smoke Density High Strength 65 - 75 Durometer Color White | |
| SAE AMS 3315F | EN-Silicone (VMQ) Rubber Sheet Glass Cloth Reinforced | |
| SAE AMS 3316 | EN-Silicone Rubber Fiberglass Fabric Reinforced | |
| SAE AMS 3320H | EN-Silicone (VMQ) Rubber Sheet Glass Cloth Reinforced Heat and Weather Resistant 60 - 80 | |
| SAE AMS 3323 | EN-Sponge Fluorosilicone (FVM) Rubber Closed Cell | |
| SAE AMS 3325E | EN-(R) Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 55 - 65 | |
| SAE AMS 3327D | EN-Fluorosilicone (FVMQ) Rubber High Temperature Fuel and Oil Resistant 70 - 80 | |
| SAE AMS 3328B | EN-Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 35 - 45 | |
| SAE AMS 3329B | EN-Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant High Strength 45 - 55 | |
| SAE AMS 3330B | EN-(R) Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 45 - 55 | |
| SAE AMS 3331B | EN-Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 65 - 75 | |
| SAE AMS 3332E | EN-Silicone Rubber Extreme Low-Temperature Resistant 15 - 30 |