NASA Collection
This collection contains documents from the following standards organization(s): NASA - National Aeronautics and Space Administration, NASA - GSFC - Robert H. Goddard Space Flight Center, NASA - KSC - Kennedy Space Center, NASA - MSFC - Marshall Space Flight Center, Defense Information Systems Agency (DEPSO), NASA - JSC - Johnson Space Center
| NASA NASA-LLIS-0917 | EN-Lessons Learned - Inadequate Project/Line Interaction Throughout Mars Climate Orbiter's Project Life Cycle (1999) | |
| NASA NASA-LLIS-0918 | EN-Lessons Learned - Evolution of Mission Requirements for Support Equipment | |
| NASA NASA-LLIS-0919 | EN-Lessons Learned - Principal Investigator (PI) Mode Contingency Funding | |
| NASA NASA-LLIS-0920 | ||
| NASA NASA-LLIS-0921 | EN-Lessons Learned - Acquisition and Oversight of Contracted Software Development (1999) | |
| NASA NASA-LLIS-0922 | EN-Lessons Learned - Bubble Formation in Dampers May Cause Transient Un-Damped Motion (1998) | |
| NASA NASA-LLIS-0923 | EN-Lessons Learned - Quick Release Pin Causes Shuttle Launch Scrub | |
| NASA NASA-LLIS-0924 - | EN-Lessons Learned - Tin Whiskers Cause Electrical Shorts | |
| NASA NASA-LLIS-0925 | EN-Lessons Learned - KAO (Kuiper Airborne Observatory) Cavity Wall Deflections | |
| NASA NASA-LLIS-0926 | EN-Lessons Learned - Space Shuttle Program - Process Control Focus Group Machining/Equipment/Machine Maintenance Can Affect Hardware Integrity | |
| NASA NASA-LLIS-0927 | EN-Lessons Learned - KAO (Kuiper Airborne Observatory) Gauge Calibration Problem During Aircraft Pressure Test | |
| NASA NASA-LLIS-0928 | EN-Lessons Learned - KAO Aft Bulkhead Installation | |
| NASA NASA-LLIS-0929 | EN-Lessons Learned - Planning Effective Project Reviews (1999) | |
| NASA NASA-LLIS-0930 | EN-Lessons Learned - Hidden Hazards Associated With Raised Flooring | |
| NASA NASA-LLIS-0931 | EN-Lessons Learned - Faulty Chair Mechanism | |
| NASA NASA-LLIS-0932 | EN-Lessons Learned - Configuration Control for Underground Utilities | |
| NASA NASA-LLIS-0933 | EN-Lessons Learned - Failure occurred at the Transonic Dynamics Tunnel (TDT) | |
| NASA NASA-LLIS-0934 | EN-Lessons Learned - SSME 0523 Test 902-772 Major Mishap | |
| NASA NASA-LLIS-0935 | EN-Lessons Learned - High Velocity OxyFuel (HVOF) Thermal Spray System Incident | |
| NASA NASA-LLIS-0936 | EN-Lessons Learned - Use of Commercial/Industry Terminology | |
| NASA NASA-LLIS-0937 | EN-Lessons Learned - Mobile Crane Mishap | |
| NASA NASA-LLIS-0938 | EN-Lessons Learned - Probable Scenario for Mars Polar Lander Mission Loss (1998) | |
| NASA NASA-LLIS-0939 | EN-Lessons Learned - MPL Uplink Loss Timer Software/Test Errors (1998) | |
| NASA NASA-LLIS-0940 | EN-Lessons Learned - 12 Foot Pressure Wind Tunnel Fall Mishap Report | |
| NASA NASA-LLIS-0941 | EN-Lessons Learned - Involve Project Scientists in Critical Decisions Throughout the Project Lifecycle (1999) | |
| NASA NASA-LLIS-0942 | EN-Lessons Learned - Improper Use of Hand Tools | |
| NASA NASA-LLIS-0943 | EN-Lessons Learned - Fire Hazards- Linseed Oil | |
| NASA NASA-LLIS-0944 | EN-Lessons Learned - Pyrovalve Anomaly Studies | |
| NASA NASA-LLIS-0945 | EN-Lessons Learned - Unexpected reactions in chemical mixtures during storage | |
| NASA NASA-LLIS-0946 | EN-Lessons Learned - Solid Rocket Motor Case-to-Nozzle Joint: Add a Pressurizing Slot in Case Insulation | |
| NASA NASA-LLIS-0947 | EN-Lessons Learned - Solid Rocket Motor Case-to-Nozzle Joint: Interference Fit Bondline Case and Nozzle Insulation | |
| NASA NASA-LLIS-0948 | EN-Lessons Learned - Solid Rocket Motor Case-to-Nozzle Joint: Replace Zinc Chromate Putty with Polysulfide Adhesive | |
| NASA NASA-LLIS-0949 | EN-Lessons Learned - Solid Rocket Motor Case-to-Nozzle Joint: Wiper "O" Ring and Vent Slot Addition | |
| NASA NASA-LLIS-0950 | EN-Lessons Learned - Solid Rocket Motor Case-to-Nozzle Joint: Addition of Radial Bolts | |
| NASA NASA-LLIS-0951 | EN-Lessons Learned - Solid Rocket Motor Case-to-Nozzle Joint: "O" Ring Compression Increase | |
| NASA NASA-LLIS-0952 | EN-Lessons Learned - Solid Rocket Motor Case-to-Nozzle Joint: Added Capture Feature | |
| NASA NASA-LLIS-0953 | EN-Lessons Learned - Solid Rocket Motor Case-to-Case Field Joint: Larger "O" rings and "O" ring grooves | |
| NASA NASA-LLIS-0954 | EN-Lessons Learned - Solid Rocket Motor Case-to-Case Field Joint: Added Joint Heater | |
| NASA NASA-LLIS-0955 | EN-Lessons Learned - Solid Rocket Motor Case-to-Case Field Joint: Addition of a Pressurizing "J" slot in the Case Insulation | |
| NASA NASA-LLIS-0956 | EN-Lessons Learned - Solid Rocket Motor Case-to-Case Field Joint: Added Leak Check Port | |
| NASA NASA-LLIS-0957 | EN-Lessons Learned - Solid Rocket Motor Nozzle Internal Seals: Dual "O" Ring Seals and Leak Check Ports | |
| NASA NASA-LLIS-0958 | EN-Lessons Learned - Solid Rocket Motor Joint Protection System | |
| NASA NASA-LLIS-0959 | EN-Lessons Learned - Solid Rocket Motor Factory Joint Insulation: Safety Factors | |
| NASA NASA-LLIS-0960 | EN-Lessons Learned - Space Shuttle Main Engine (SSME): Integrated Subsystem Test Bed | |
| NASA NASA-LLIS-0961 | EN-Lessons Learned - Space Shuttle Main Engine (SSME) Component Test Facility: Simplicity of Design | |
| NASA NASA-LLIS-0962 | EN-Lessons Learned - Space Shuttle Main Engine (SSME): Computer Models of Transient Performance | |
| NASA NASA-LLIS-0963 | EN-Lessons Learned - Space Shuttle Main Engine (SSME): Start Sequence Investigations | |
| NASA NASA-LLIS-0964 | EN-Lessons Learned - Space Shuttle Main Engine (SSME): Dry Gaseous Purges | |
| NASA NASA-LLIS-0965 | EN-Lessons Learned - Space Shuttle Main Engine (SSME): Turbopump Bearing Lubrication | |
| NASA NASA-LLIS-0966 | EN-Lessons Learned - Space Shuttle Main Engine (SSME): Fuel System Oscillations | |
| NASA NASA-LLIS-0967 | EN-Lessons Learned - Space Shuttle Main Engine (SSME): Instrumented Safety Checks During Engine Startup | |
| NASA NASA-LLIS-0968 | EN-Lessons Learned - Avoid Test Program Reductions on Lower Cost/Higher Risk Instrument Projects | |
| NASA NASA-LLIS-0969 | EN-Lessons Learned - Project Management Team Composition | |
| NASA NASA-LLIS-0970 | EN-Lessons Learned - Planning for Transition of Project Management Responsibilities | |
| NASA NASA-LLIS-0971 | EN-Lessons Learned - Identification of Market Needs | |
| NASA NASA-LLIS-0972 | EN-Lessons Learned - User IDs and Passwords | |
| NASA NASA-LLIS-0973 | EN-Lessons Learned - Web-based Training Considerations | |
| NASA NASA-LLIS-0974 - | EN-Lessons Learned - Training Course Development | |
| NASA NASA-LLIS-0975 | EN-Lessons Learned - Role of Marketing in System Use | |
| NASA NASA-LLIS-0976 - | EN-Lessons Learned - User Feedback (Operational) Testing | |
| NASA NASA-LLIS-0977 | EN-Lessons Learned - Use of Shareware/Freeware as Integral Elements of Computer Systems | |
| NASA NASA-LLIS-0978 | EN-Lessons Learned - End-to-End Testing | |
| NASA NASA-LLIS-0979 | EN-Lessons Learned - Thruster Plume Impingement | |
| NASA NASA-LLIS-0980 | EN-Lessons Learned - Spacecraft Interface Simulators | |
| NASA NASA-LLIS-0981 - | EN-Lessons Learned - Reverse Polarity Concerns With Tantalum Capacitors | |
| NASA NASA-LLIS-0982 | EN-Lessons Learned - Retention of Traceability Data for EEE Parts | |
| NASA NASA-LLIS-0983 | EN-Lessons Learned - Fixed Price Spacecraft Contracting | |
| NASA NASA-LLIS-0984 | EN-Lessons Learned - Acquisition Management for In-house Development Efforts | |
| NASA NASA-LLIS-0985 | EN-Lessons Learned - Banana Plug Test Leads | |
| NASA NASA-LLIS-0986 | EN-Lessons Learned - Tight scheduling and New Unfamiliar Equipment in Hazardous Environments | |
| NASA NASA-LLIS-0987 | EN-Lessons Learned - Chandra X-ray Observatory (CXO) Development Program Programmatic "Lessons Learned" | |
| NASA NASA-LLIS-0988 | EN-Lessons Learned - Ordinance/Firing Line Misconnect | |
| NASA NASA-LLIS-0989 | EN-Lessons Learned - ETU Laser Diode Pump Array Failure - Indium gasket short between contacts caused electrical failure | |
| NASA NASA-LLIS-0990 | EN-Lessons Learned - Degradation of Pur-Ester Polyurethane Tubing due to Aging | |
| NASA NASA-LLIS-0991 | EN-Lessons Learned - Planning and Conduct of Hazardous Tests Require Extra Precautions (2000-2001) | |
| NASA NASA-LLIS-0992 | EN-Lessons Learned - Spaceborne Imaging Camera Contamination (1999) | |
| NASA NASA-LLIS-0993 | EN-Lessons Learned - Pressure Testing | |
| NASA NASA-LLIS-0994 | EN-Lessons Learned - Respiratory problems from the laying up of fiberglass operation | |
| NASA NASA-LLIS-0995 | EN-Lessons Learned - Space Shuttle Program/Operations-Processing/Workforce |