Print Page Email Page Smaller Text Larger Text

MODUK - Defence Specifications Collection

This collection contains documents from the following standards organization(s): British Defence Standards

Most Popular Standards from the MODUK - Defence Specifications Collection

MODUK DTD-5313 EN-Forging Stock of Titanium - Aluminium - Vanadium Alloy (Tensile Strength 930-1160 MPa) (Limiting Ruling Section 150mm) (01.74) 
MODUK DTD-406B EN-De-Icing Fluid AL-5 (09.61) 
MODUK DTD-573 EN-Fluorescent Paint-(Reprinted October 1963) 
MODUK DTD-5567A EN-Interior and Exterior Protective Finishing Scheme (Cold Curing Epoxide Type) (11.64) 
MODUK DEF-1165-A EN-Paint Underwater Protection for Steel and Wood (Admar)-Reprinted January 1970 
MODUK DEF-1237 EN-Wrapping Mouldable Waxed Grease-Resisting (02.57) (Reprinted July 1970 Incorporating Amendment No. 1)-Issue 1 (09.96) 
MODUK DTD-5638 EN-Heat Resisting Nickel Base Alloy Fe - 52.5 Ni - 19 Cr - 3 Mo - 5 (Nb+Ta) - 0.9 Ti - 0.5 Al Vacuum Melted Bar and Wire for Fasteners Maximum Diameter or Sectional Dimension 50mm (07.85) 
MODUK DEF-174 EN-Jointing Compound Graphited (07.69) 
MODUK DEF-4500 EN-Dimethylaniline 
MODUK DTD-5018A EN-Ingots and Castings of Aluminium-Magnesium-Zinc Alloy (Solution Treated) (Mg 7.7 Zn 1.2) (06.71) 
MODUK DEF-130 EN-Chromate Passivation of Cadmium and Zinc Surfaces (05.75)-(Reprinted March 1977 Incorporating Amendment No. 1) 
MODUK DTD-929 EN-Penetrant Methods of Flaw Detection (09.57)-(Reprinted December 1965) 
MODUK DTD-560 EN-Rubber Parts for Use with Aviation Fuel (04.49)-(Reprinted September 1964 Incorporating Amendment No. 1) 
MODUK DTD-5587 EN-Paint System Luminous Tritium Activated 1. Paint Undercoat for Luminous Paint: (A) Air Drying; (B) Stoving 2. Paint Medium for Luminous Paint: (A) Air Drying; (B) Stoving 3. Compound Luminous Tritium Activated ( 
MODUK DEF-1282 EN-Air Hose 1 Inch Internal Diameter for Remote Breathing Apparatus (01.65) 
MODUK DEF-106 EN-Special First Quality Hard Drawn Steel Spring Wire (06.61) 
MODUK DTD-5503 EN-Cable Crimping Compound (for Aluminium Cables) (04.54)-(Reprinted December 1965) 
MODUK DTD-5044 EN-Aluminium - Zinc - Magnesium - Copper - Manganese Alloy Bars and Extruded Sections (Not Exceeding 10 Inches or Minor Sectional Dimension) (Solution Treated and Precipitation Treated) (03.58)-(Reprinted March 1961) 
MODUK DTD-939 EN-Silver Plating of Heat-Resisting Threaded Parts for Anti-Seizure Purposes (03.66)-(Reprinted February 1967) 
MODUK DEF-1053: METH NO. 12  
MODUK DEF-2331-A EN-Protective PX-1 Dyed Protective PX-1 Undyed (07.61)-(Consolidated Edition August 1976 Incorporating Amendments Nos. 1 and 2); Amendment 3 
MODUK DTD-5192 EN-Nickel-Chromium- Molybdenum-Vanadium Steel (190 kfg/mm2) (Vacuum Remelted: Limiting Ruling Section 100mm) (06.67) 
MODUK DTD-5102 EN-Soft Iron for Dynamo-Electric Machines (Type B) (10.59);-Amendment 1 
MODUK DTD-5024 EN-Aluminium - Zinc - Magnesium - Copper - Manganese Alloy Forgings (Not Exceeding 10 Inches Diameter or Minor Sectional Dimension) (Solution Treated and Precipitation Treated) (03.58)-(Reprinted May 1966 Incorporating 
MODUK DTD-369B EN-Pigmented Varnish Jointing Compound (06.87);-Amendment 1 
MODUK DTD-5639 EN-Heat Resisting Nickel Base Alloy Ni - 19.5Cr - 13.5Co - 4Mo - 3Ti - 1.4 Al Vacuum Melted Bar and Wire for Fasteners Maximum Diameter or Sectional Dimension 50mm (07.85) 
MODUK DEF-103 EN-Steel for Hardened and Tempered High Quality Coil Springs for Guns and Armoured Fighting Vehicles (05.60)-(Reprinted December 1971) 
MODUK DEF-2182 EN-Oil OX-10 (03.57) 
MODUK DTD-5555A EN-Exterior Glossy Finishing Schemes (Cold Curing Epoxide Type) Scheme I Scheme II and Scheme III (12.65)-(Reprinted May 1975) 
MODUK DTD-5092 EN-Soft Iron for Dynamo-Electric Machines (Type A) (10.59);-Amendment 1 
MODUK DTD-904C EN-Cadmium Plating (05.63)-(Reprinted December 1966 Incorporating Amendment No. 1) 
MODUK DTD-189A EN-Chromium-Nickel Corrosion-Resistant Steel Wire Rivets and Split Pins (the Wire is Suitable for Locking Wire) (09.59)-(Reprinted October 1975 Incorporating Amendment No. 1) 
MODUK DTD-413 EN-Cast Iron Piston Ring Pots (Sand or Chill Cast) (06.40)-(Reprinted September 1964) 
MODUK DTD-5540B EN-Corrosion Preventive Oil: Hydraulic System NATO Code Number: C-635 Joint Service Designation: PX-26-8/1975 
MODUK DTD-5580A EN-Exterior and Interior Finishing Schemes - Matt and Glossy (Cold Curing Polyurethane Type) Scheme I and Scheme II 
MODUK DTD-770A EN-Polish for Transparent Perspex Panels and Mouldings (04.56)-(Reprinted June 1963) 
MODUK DTD-1281 EN-Optical Requirements for Aircrew Helmet Visors and Uncorrected Sunglasses (06.80) 
MODUK DTD-412 EN-Aluminium-Bronze Sand or Die Castings (04.40)-(Reprinted April 1963 Incorporating Amendment No. 1) 
MODUK DTD-5036 EN-Low Carbon Chromium-Nickel Corrosion-Resisting Steel Wire Rivets and Split Pins (Weldable) (05.67);-Amendment 1 
MODUK DTD-942 EN-Anodizing of Titanium and Titanium Alloys (08.73) 
MODUK DTD-627 EN-Brass Rod or Wire for Machined Components Subject to a Riveting Operation (Not Suitable for the Manufacture of Rivets) (09.44)-(Reprinted September 1963) 
MODUK DTD-498 EN-Silicon-Nickel-Copper Alloy Bars and Forgings-05.42; Reprinted October 1961 Incorporating Amendment No. 1 
MODUK DTD-5066 EN-12 Per Cent Chromium Heat Resisting Steel Suitable for Bolts Studs Set Screws and Nuts (Limiting Ruling Section 50 mm; 110 Hbar) (12.68);-Amendment 1 
MODUK DEF-2221-A EN-Grease LG-380 (08.54) 
MODUK DTD-232 EN-45 Per Cent Nickel Alloy Sheets and Strips of 40-50 Tons 0.1 Per Cent Proof Stress (10.34) 
MODUK DTD-5509 EN-Synthetic Rubber Resistant to Engine Lubricating Oils Greases and Fuels (06.55)-(Reprinted November 1963 Incorporating Amendment No. 1) 
MODUK DTD-763A EN-Polishing Cloth for Use on Transparent Plastic Panels (03.60) 
MODUK DTD-119 EN-Aluminium Welding Flux (03.30)-(Reprinted September 1966) 
MODUK DTD-197A EN-Aluminium-Nickel-Iron Bronze Bars and Forgings (12.44)-(Reprinted November 1966) 
MODUK DTD-5625 EN-Standard Annealed Float Glass for Aircraft Glazing (06.80)