ISO - Wood Glass Ceramics Rubber Plastics & other Materials Collection
This collection contains documents from the following standards organization(s): International Organization for Standardization
| ISO 17710 | EN-Plastics - Polyols for use in the Production of Polyurethane - Determination of Degree of Unsaturation by Microtitration-First Edition | |
| ISO 17744 | EN-Plastics Determination of specific volume as a function of temperature and pressure (pvT diagram) Piston apparatus method-First Edition | |
| ISO 1776 | EN-Glass - Resistance to Attack by Hydrochloric Acid at 100 Degrees Celsius - Flame Emission or Flame Atomic Absorption Spectrometric Method-First Edition | |
| ISO 17771 | EN-Plastics Thermoset moulding compounds Determination of the degree of fibre wetting in SMC-First Edition | |
| ISO 178 | EN-Plastics - Determination of Flexural Properties-Fourth Edition; Amendment 1: 02/15/2004 | |
| ISO 17832 | EN-Non-parallel steel wire and cords for tyre reinforcement-First Edition | |
| ISO 179-1 | EN-Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test-Second Edition | |
| ISO 179-2 | EN-Plastics - Determination of Charpy Impact Properties - Part 2: Instrumented Impact Test-First Edition; Technical Corrigendum 1: 11-15-1998 | |
| ISO 1795 | EN-Rubber Raw Natural and Raw Synthetic - Sampling and Further Preparative Procedures-Fourth Edition | |
| ISO 1798 | EN-Flexible cellular polymeric materials - Determination of tensile strength and elongation at break-Fourth edition | |
| ISO 180 | EN-Plastics - Determination of Izod Impact Strength-Third Edition; Amendment 1: 12/1/2006 | |
| ISO 1802 | EN-Natural Rubber Latex Concentrate - Determination of Boric Acid Content-Third Edition | |
| ISO 18064 | EN-Thermoplastic elastomers Nomenclature and abbreviated terms-First Edition | |
| ISO 18164 | EN-Passenger car truck bus and motorcycle tyres Methods of measuring rolling resistance-First Edition; Replaces ISO 8767 ISO 9948 and ISO 13327 | |
| ISO 1817 | EN-Rubber Vulcanized - Determination of the Effect of Liquids-Fourth Edition; Corrected Version 2/15/2006 | |
| ISO 182-1 | EN-Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to Evolve Hydrogen Chloride and Any Other Acidic Products at Elevated Temperatures - Part 1: Cong | |
| ISO 182-2 | EN-Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to Evolve Hydrogen Chloride and Any Other Acidic Products at Elevated Temperatures - Part 2: pH M | |
| ISO 182-3 | EN-Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to Evolve Hydrogen Chloride and Any Other Acidic Products at Elevated Temperatures - Part 3: Cond | |
| ISO 182-4 | EN-Plastics - Determination of the Tendency of Compounds and Products Based on Vinyl Chloride Homopolymers and Copolymers to Evolve Hydrogen Chloride and Any Other Acidic Products at Elevated Temperatures - Part 4: Pote | |
| ISO 1823-1 | EN-Rubber Hoses and Hose Assemblies - Part 1: On-Shore Oil Suction and Discharge - Specification-First Edition | |
| ISO 1823-2 | EN-Rubber Hoses and Hose Assemblies - Part 2: Ship/Dockside Discharge - Specification-First Edition | |
| ISO 1825 | EN-Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification-Third Edition | |
| ISO 1827 | EN-Rubber vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods-Third Edition | |
| ISO 18280 | EN-Plastics Epoxy resins Test methods-First Edition | |
| ISO 18352 | EN-Carbon-fibre-reinforced plastics - Determination of compression-after-impact properties at a specified impact-energy level-First Edition | |
| ISO 18452 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) - Determination of thickness of ceramic films by contact-probe profilometer-First Edition | |
| ISO 18517 | EN-Rubber vulcanized or thermoplastic Hardness testing Introduction and guide-First Edition | |
| ISO 1853 | EN-Conducting and Dissipative Rubbers Vulcanized or Thermoplastic - Measurement of Resistivity-Second Edition | |
| ISO 1856 | EN-Flexible Cellular Polymeric Materials - Determination of Compression Set-Third Edition | |
| ISO 1856 AMD 1 | EN-Flexible cellular polymeric materials - Determination of compression set-Third Edition | |
| ISO 1872-1 | EN-Plastics - Polyethylene (PE) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications-Second Edition | |
| ISO 1872-2 | EN-Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties-Third Edition | |
| ISO 1873-1 | EN-Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications-Fourth Edition; CEN EN ISO 1873-1: 1995 | |
| ISO 1873-2 | EN-Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties-Third Edition | |
| ISO 1874-1 | EN-Plastics - Polyamide (PA) Moulding and Extrusion Materials - Part 1: Designation-Second Edition; Corrected and Reprinted - 1992 | |
| ISO 1874-2 | EN-Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties-Third Edition | |
| ISO 1875 | EN-Plastics - Plasticized Cellulose Acetate - Determination of Matter Extractable by Diethyl Ether-First Edition | |
| ISO 18753 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) Determination of absolute density of ceramic powders by pyknometer-First Edition | |
| ISO 18754 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) Determination of density and apparent porosity-First edition | |
| ISO 18755 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) Determination of thermal diffusivity of monolithic ceramics by laser flash method-First Edition | |
| ISO 18756 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method-First Edition | |
| ISO 18757 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) Determination of specific surface area of ceramic powders by gas adsorption using the BET method-First Edition | |
| ISO 18775 | EN-Veneers - Terms and definitions determination of physical characteristics and tolerances-First Edition | |
| ISO 18776 | EN-Laminated veneer lumber (LVL) - Specifications-First Edition | |
| ISO 188 | EN-Rubber Vulcanized or Thermoplastic - Accelerated Ageing and Heat Resistance Tests-Fourth Edition | |
| ISO 18852 | EN-Rubber compounding ingredients Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)-First edition | |
| ISO 18872 | EN-Plastics - Determination of tensile properties at high strain rates-First Edition | |
| ISO 18898 | EN-Rubber Calibration and verification of hardness testers-First Edition | |
| ISO 18899 | EN-Rubber Guide to the calibration of test equipment-First Edition | |
| ISO 1893 | EN-Refractory products - Determination of refractoriness under load - Differential method with rising temperature-Third Edition | |
| ISO 19003 | EN-Rubber and rubber products Guidance on the application of statistics to physical testing-First Edition | |
| ISO 19004 | EN-Rubber and rubber products Determination of the sensitivity of test methods-First Edition | |
| ISO 19013-1 | EN-Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 1: Diesel fuels-First Edition; Together with ISO 19013-2 Replaces ISO 4639-1: 1987 ISO 4639-2: 1995 ISO 4639-3: 1995 | |
| ISO 19013-2 | EN-Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 2: Gasoline fuels-First Edition; Together with ISO 19013-1 Replaces ISO 4639-1: 1987 ISO 4639-2: 1995 ISO 4639-3: 1995 | |
| ISO 19212 | EN-Adhesives Determination of temperature dependence of shear strength-First Edition | |
| ISO 1922 | EN-Rigid Cellular Plastics - Determination of Shear Strength-Third Edition | |
| ISO 1923 | EN-Cellular Plastics and Rubbers - Determination of Linear Dimensions-Second Edition; CEN PREN 21923: 1994; CEN EN ISO 1923: 1995 | |
| ISO 19252 | EN-Plastics - Determination of scratch properties-First Edition | |
| ISO 1926 | EN-Rigid cellular plastics - Determination of tensile properties-Fourth Edition | |
| ISO 1927 | EN-Prepared Unshaped Refractory Materials (Dense and Insulating) - Classification-Second Edition | |
| ISO 1954 | EN-1999 Plywood - Tolerances on Dimensions-First Edition | |
| ISO 19712-1 | EN-Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications-First Edition | |
| ISO 19712-2 | EN-Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods-First Edition | |
| ISO 19712-3 | EN-Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes-First Edition | |
| ISO 1997 | EN-Granulated Cork and Cork Powder - Classification Properties and Packing-Second Edition | |
| ISO 2000 | EN-Rubber raw natural Guidelines for the specification of technically specified rubber (TSR)-Sixth Edition | |
| ISO 2004 | EN-Natural rubber latex concentrate - Centrifuged or creamed ammonia-preserved types - Specifications-Fifth Edition | |
| ISO 2005 | EN-Rubber Latex Natural Concentrate - Determination of Sludge Content-Third Edition; Amendment 1: 02/01/2006 | |
| ISO 2006-1 | EN-Rubber latex synthetic - Determination of mechanical stability - Part 1: High-speed method-First Edition | |
| ISO 2006-2 | EN-Rubber latex synthetic - Determination of mechanical stability - Part 2: Moderate-speed method under load-First Edition | |
| ISO 2007 | EN-Rubber Unvulcanized - Determination of Plasticity - Rapid-Plastimeter Method-Fourth Edition | |
| ISO 20182 | EN-Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns-Second Edition | |
| ISO 20200 | EN-Plastics Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test-First Edition | |
| ISO 2027 | EN-Natural Rubber Latex Concentrate Evaporated Preserved - Specification-Third Edition | |
| ISO 2028 | EN-Synthetic Rubber Latex - Preparation of Dry Polymer-Fourth Edition | |
| ISO 20299-1 | EN-Film for wrapping rubber bales Part 1: Butadiene rubber (BR) and styrenebutadiene rubber (SBR)-First Edition | |
| ISO 20299-1 CORR 1 | EN-Film for wrapping rubber bales - Part 1: Butadiene rubber (BR) and styrene-butadiene rubber (SBR) TECHNICAL CORRIGENDUM 1-First Edition | |
| ISO 20299-2 | EN-Film for wrapping rubber bales Part 2: Natural rubber-First Edition | |
| ISO 20299-3 | EN-Film for wrapping rubber bales - Part 3: Ethylene-propylene-diene rubber (EPDM) acrylonitrile-butadiene rubber (NBR) hydrogenated nitrile-butadiene rubber (HNBR) acrylic-ethylene rubber (AEM) and acrylic rubber |