ISO - Wood Glass Ceramics Rubber Plastics & other Materials Collection
This collection contains documents from the following standards organization(s): International Organization for Standardization
| ISO 5478 | EN-Rubber Determination of styrene content Nitration method-Third Edition | |
| ISO 5600 | EN-Rubber - Determination of adhesion to rigid materials using conical shaped parts-Third Edition | |
| ISO 5603 | EN-Rubber Vulcanized - Determination of Adhesion to Wire Cord First Edition-Second Edition | |
| ISO 5659-1 | EN-Plastics - Smoke Generation - Part 1: Guidance on Optical-Density Testing First Edition | |
| ISO 5659-2 | EN-Plastics Smoke generation Part 2: Determination of optical density by a single-chamber test-Second Edition | |
| ISO 5751-1 | EN-Motorcycle tyres and rims (metric series) - Part 1: Design guides-Sixth Edition | |
| ISO 5751-1 CORR 1 | EN-Motorcycle tyres and rims (metric series) - Part 1: Design guides TECHNICAL CORRIGENDUM 1-Sixth Edition | |
| ISO 5751-2 | EN-Motorcycle Tyres and Rims (Metric Series) - Part 2: Tyre Dimensions and Load-Carrying Capacities-Fifth Edition | |
| ISO 5751-3 | EN-Motorcycle Tyres and Rims (Metric Series) - Part 3: Range of Approved Rim Contours-Fifth Edition | |
| ISO 5771 | EN-Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification-Third Edition | |
| ISO 5772 | EN-Rubber Hoses and Hose Assemblies for Measured Fuel Dispensing - Specification-First Edition; Replaces ISO 5772-1: 1986 | |
| ISO 5775-1 | EN-Bicycle Tyres and Rims - Part 1: Tyre Designations and Dimensions-Fifth Edition | |
| ISO 5794-1 | EN-Rubber compounding ingredients - Silica precipitated hydrated - Part 1: Non-rubber tests-Fourth Edition | |
| ISO 5794-2 | EN-Rubber Compounding Ingredients - Silica Precipitated Hydrated - Part 2: Evaluation Procedures in Styrene-Butadiene Rubber-Second Edition | |
| ISO 5796 | EN-Rubber Compounding Ingredients - Natural Calcium Carbonate - Test Methods-Second Edition | |
| ISO 584 | EN-Plastics - Unsaturated Polyester Resins - Determination of Reactivity at 80 Degrees C (Conventional Method)-First Edition | |
| ISO 585 | EN-Plastics - Unplasticized Cellulose Acetate - Determination of Moisture Content-Second Edition | |
| ISO 5892 | EN-Rubber Building Gaskets - Materials for Preformed Solid Vulcanized Structural Gaskets - Specification First Edition | |
| ISO 5893 | EN-Rubber and Plastics Test Equipment - Tensile Flexural and Compression Types (Constant Rate of Traverse) - Specification-Third Edition | |
| ISO 5945 | EN-Rubber - Determination of Polyisoprene Content Second Edition | |
| ISO 5999 | EN-Flexible cellular polymeric materials - Polyurethane foam for load-bearing applications excluding carpet underlay - Specification-Second Edition | |
| ISO 60 | EN-Plastics - Determination of Apparent Density of Material That Can Be Poured from a Specified Funnel-Second Edition | |
| ISO 604 | EN-Plastics - Determination of Compressive Properties-Third Edition | |
| ISO 6054-1 | EN-Motorcycle Tyres and Rims (Code-Designated Series) - Diameter Codes 4 to 12 - Part 1: Tyres Third Edition | |
| ISO 6072 | EN-Hydraulic Fluid Power - Compatibility between Fluids and Standard Elastomeric Materials-Second Edition | |
| ISO 61 | EN-Plastics - Determination of Apparent Density of Moulding Material That Cannot Be Poured from a Specified Funnel-First Edition | |
| ISO 6101-1 | EN-Rubber - Determination of Metal Content by Atomic Absorption Spectrometry - Part 1: Determination of Zinc Content Second Edition | |
| ISO 6101-2 | EN-Rubber - Determination of Metal Content by Atomic Absorption Spectrometry - Part 2: Determination of Lead Content-Second Edition | |
| ISO 6101-3 | EN-Rubber - Determination of Metal Content by Atomic Absorption Spectrometry - Part 3: Determination of Copper Content-Second Edition | |
| ISO 6101-4 | EN-Rubber - Determination of Metal Content by Atomic Absorption Spectrometry - Part 4: Determination of Manganese Content-Second Edition | |
| ISO 6101-5 | EN-Rubber Determination of metal content by atomic absorption spectrometry Part 5: Determination of iron content-Second Edition | |
| ISO 6117 | EN-Road vehicles - Elastomeric boots for drum-type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 °C max.)-Second Edition | |
| ISO 6118 | EN-Road Vehicles - Elastomeric Cups and Seals for Hydraulic Brake Actuating Cylinders Using a Non-Petroleum Base Hydraulic Brake Fluid (Service Temperature 70 Degrees Celsius Maximum)-Second Edition | |
| ISO 6119 | EN-Road vehicles Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.)-Second Edition | |
| ISO 6120 | EN-Road Vehicles - Brake Hose Assemblies for Hydraulic Braking Systems Used with Petroleum-Base Brake Fluid-Second Edition; Corrected and Reprinted 10/01/1997 | |
| ISO 6123-1 | EN-Rubber or Plastics Covered Rollers - Specifications - Part 1: Requirements for Hardness First Edition | |
| ISO 6123-2 | EN-Rubber- or Plastics-Covered Rollers - Specifications - Part 2: Surface Characteristics Second Edition | |
| ISO 6123-3 | EN-Rubber- or Plastics-Covered Rollers - Specifications - Part 3: Dimensional Tolerances First Edition | |
| ISO 6133 | EN-Rubber and Plastics - Analysis of Multi-Peak Traces Obtained in Determinations of Tear Strength and Adhesion Strength-Second Edition | |
| ISO 614 | EN-Shipbuilding and Marine Structures - Toughened Safety Glass Panes for Rectangular Windows and Side Scuttles - Punch Method of Non-Destructive Strength Testing-Third Edition | |
| ISO 6179 | EN-Rubber vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique)-Fourth Edition | |
| ISO 6186 | EN-Plastics - Determination of Pourability-Second Edition | |
| ISO 6187 | EN-Rigid Cellular Plastics - Determination of Friability-First Edition | |
| ISO 6194-1 | EN-Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 1: Nominal dimensions and tolerances-Second Edition | |
| ISO 6194-2 | EN-Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 2: Vocabulary-Second Edition | |
| ISO 6194-3 | EN-Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 3: Storage handling and installation-Second Edition | |
| ISO 6194-4 | EN-Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 4: Performance test procedures-Third Edition | |
| ISO 6194-5 | EN-Rotary-shaft lip-type seals incorporating elastomeric sealing elements - Part 5: Identification of visual imperfections-Second edition | |
| ISO 62 | EN-Plastics - Determination of water absorption-Third Edition | |
| ISO 6209 | EN-Rubber compounding ingredients - Carbon black - Determination of solvent-extractable material-Fourth Edition | |
| ISO 6225-1 | EN-Rubber raw natural Determination of castor oil content Part 1: Determination of castor oil glyceride content by thin-layer chromatography-Second Edition | |
| ISO 6225-2 | EN-Rubber Raw Natural - Determination of Castor Oil Content - Part 2: Determination of Total Ricinoleic Acid Content by Gas Chromatography Second Edition | |
| ISO 6235 | EN-Rubber Raw - Determination of Block Polystyrene Content - Ozonolysis Method Second Edition | |
| ISO 6237 | EN-Adhesives Wood-to-wood adhesive bonds Determination of shear strength by tensile loading-Second Edition | |
| ISO 6238 | EN-Adhesives - Wood-To-Wood Adhesive Bonds - Determination of Shear Strength by Compressive Loading-Second Edition | |
| ISO 631 | EN-Mosaic Parquet Panels - General Characteristics-First Edition | |
| ISO 633 | EN-Cork - Vocabulary-Second Edition | |
| ISO 6383-1 | EN-Plastics - Film and Sheeting - Determination of Tear Resistance - Part 1: Trouser Tear Method First Edition | |
| ISO 6383-2 | EN-Plastics - Film and Sheeting - Determination of Tear Resistance - Part 2: Elmendorf Method First Edition | |
| ISO 6401 | EN-Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method-Second Edition | |
| ISO 6402-1 | EN-Plastics - Acrylonitrile-Styrene-Acrylate (ASA) Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile-(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designat | |
| ISO 6402-2 | EN-Plastics Acrylonitrile-styrene-acrylate (ASA) acrylonitrile-(ethylene-propylenediene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials Part 2: Preparation | |
| ISO 6446 | EN-Rubber Products - Bridge Bearings - Specification for Rubber Materials First Edition | |
| ISO 6447 | EN-Rubber Seals - Joint Rings Used for Gas Supply Pipes and Fittings - Specification for Material First Edition | |
| ISO 6448 | EN-Rubber Seals - Joint Rings Used for Petroleum Product Supply Pipes and Fittings - Specification for Material First Edition | |
| ISO 6453 | EN-Polymeric Materials Cellular Flexible - Polyvinylchloride Foam Sheeting - Specification First Edition | |
| ISO 6472 | EN-Rubber Compounding Ingredients - Abbreviations-Third Edition | |
| ISO 6486-1 | EN-Ceramic Ware Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 1: Test Method-Second Edition | |
| ISO 6486-2 | EN-Ceramic Ware Glass-Ceramic Ware and Glass Dinnerware in Contact with Food - Release of Lead and Cadmium - Part 2: Permissible Limits-Second Edition | |
| ISO 6502 | EN-Rubber - Guide to the Use of Curemeters-Third Edition | |
| ISO 6505 | EN-Rubber Vulcanized or Thermoplastic - Determination of Tendency to Adhere to and to Corrode Metals-Third edition | |
| ISO 6528-1 | EN-Rubber - Determination of Total Sulfur Content - Part 1: Oxygen Combustion Flask Method Second Edition | |
| ISO 6528-2 | EN-Rubber - Determination of Total Sulfur Content - Part 2: Sodium Peroxide Fusion Method Second Edition | |
| ISO 6528-3 | EN-Rubber - Determination of Total Sulfur Content - Part 3: Furnace Combustion Method First Edition | |
| ISO 6601 | EN-Plastics Friction and wear by slidingIdentification of test parameters-Second edition | |
| ISO 6603-1 | EN-Plastics - Determination of Puncture Impact Behaviour of Rigid Plastics - Part 1: Non-Instrumented Impact Testing-Second Edition | |
| ISO 6603-2 | EN-Plastics - Determination of Puncture Impact Behaviour of Rigid Plastics - Part 2: Instrumented Impact Testing-Second Edition | |
| ISO 6605 | EN-Hydraulic fluid power Hoses and hose assemblies Test methods-Second Edition | |
| ISO 6691 | EN-Thermoplastics Polymers for Plain Bearings - Classification and Designation-Second Edition |