ISO - Wood Glass Ceramics Rubber Plastics & other Materials Collection
This collection contains documents from the following standards organization(s): International Organization for Standardization
| ISO 4655 | EN-Rubber - Reinforced Styrene-Butadiene Latex - Determination of Total Bound Styrene Content Second Edition | |
| ISO 4656 | EN-Rubber compounding ingredients - Carbon black - Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN)-First Edition | |
| ISO 4658 | EN-Acrylonitrile-Butadiene Rubber (NBR) - Evaluation Procedure-Third Edition; Amendment 1:10/15/2004 | |
| ISO 4659 | EN-Syrene-Butadiene Rubber (Carbon Black or Carbon Black and Oil Masterbatches) - Evaluation Procedure-Fifth Edition | |
| ISO 4660 | EN-Rubber Raw Natural - Colour Index Test-Third Edition | |
| ISO 4661-2 | EN-Rubber Vulcanized - Preparation of Samples and Test Pieces - Part 2: Chemical Tests First Edition | |
| ISO 4662 | EN-Rubber vulcanized or thermoplastic - Determination of rebound resilience-Third Edition | |
| ISO 4662 CORR 1 | EN-Rubber vulcanized or thermoplastic - Determination of rebound resilience TECHNICAL CORRIGENDUM 1-Third Edition | |
| ISO 4664-1 | EN-Rubber vulcanized or thermoplastic Determination of dynamic properties Part 1: General guidance-First edition | |
| ISO 4664-2 | EN-Rubber vulcanized or thermoplastic Determination of dynamic properties Part 1: General guidance-First Edition;:1986 | |
| ISO 4665 | EN-Rubber Vulcanized and Thermoplastic - Resistance to Weathering-Second Edition | |
| ISO 4666-1 | EN-Rubber Vulcanized - Determination of Temperature Rise and Resistance to Fatigue in Flexometer Testing - Part 1: Basic Principles First Edition | |
| ISO 4666-2 | EN-Rubber vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 2: Rotary flexometer-Second Edition | |
| ISO 4666-3 | EN-Rubber Vulcanized - Determination of Temperature Rise and Resistance to Fatigue in Flexometer Testing - Part 3: Compression Flexometer First Edition | |
| ISO 4671 | EN-Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies-Third Edition | |
| ISO 4707 | EN-Cork - Stoppers - Sampling for Inspection of Dimensional Characteristics First Edition | |
| ISO 4708 | EN-Composition Cork - Gasket Material - Test Methods-Second Edition | |
| ISO 4709 | EN-Composition Cork - Gasket Material - Classification System Requirements Sampling Packaging and Marking-Second Edition | |
| ISO 4710 | EN-Cork - Cylindrical Stoppers for Sparkling Wines and Gasified Wines - Characteristics-Second Edition | |
| ISO 4711 | EN-Agglomerated Cork Discs - Specifications First Edition | |
| ISO 4714 | EN-Composition Cork - Specifications Sampling Packaging and Marking-Second Edition | |
| ISO 472 | EN-Plastics - Vocabulary-Third Edition | |
| ISO 4795 | EN-Glass for Thermometer Bulbs-First Edition | |
| ISO 48 | EN-Rubber vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)-Fourth Edition | |
| ISO 48 CORR 1 | EN-Rubber vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) TECHNICAL CORRIGENDUM 1-Fourth Edition | |
| ISO 483 | EN-Plastics - Small Enclosures for Conditioning and Testing Using Aqueous Solutions to Maintain Relative Humidity at a Constant Value-Second Edition | |
| ISO 4858 | EN-Wood - Determination of Volumetric Shrinkage First Edition | |
| ISO 4859 | EN-Wood - Determination of Radial and Tangential Swelling First Edition | |
| ISO 4860 | EN-Wood - Determination of Volumetric Swelling First Edition | |
| ISO 489 | EN-Plastics - Determination of the Refractive Index-Second Edition | |
| ISO 4892-1 | EN-Plastics - Methods of Exposure to Laboratory Light Sources - Part 1: General Guidance-Second Edition | |
| ISO 4892-2 | EN-Plastics Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps-Second Edition | |
| ISO 4892-2 AMD 1 | EN-Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps AMENDMENT 1-Second Edition | |
| ISO 4892-3 | EN-Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps-Second Edition | |
| ISO 4892-4 | EN-Plastics - Methods of exposure to laboratory light sources - Part 4: Open-flame carbon-arc lamps-Second Edition | |
| ISO 4892-4 CORR 1 | EN-Plastics - Methods of exposure to laboratory light sources - Part 4: Open-flame carbon-arc lamps TECHNICAL CORRIGENDUM 1-Second Edition | |
| ISO 4894-1 | EN-Plastics - Styrene/Acrylonitrile (SAN) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications-Third Edition | |
| ISO 4894-2 | EN-Plastics - Styrene/ Acrylonitrile (SAN) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties Second Edition | |
| ISO 4895 | EN-Plastics - Liquid Epoxide Resins - Determination of Tendency to Crystallize-Second Edition | |
| ISO 4897 | EN-Cellular Plastics - Determination of the Coefficient of Linear Thermal Expansion of Rigid Materials at Sub-Ambient Temperatures First Edition | |
| ISO 4898 | EN-Rigid cellular plastics - Thermal insulation products for buildings - Specifications-Fifth Edition | |
| ISO 4899 | EN-Textile-Glass-Reinforced Thermosetting Plastics - Properties and Test Methods Second Edition | |
| ISO 4901 | EN-Reinforced Plastics Based on Unsaturated Polyester Resins - Determination of Residual Styrene Monomer Content First Edition; (AS/NZS 4257.8: 1994) | |
| ISO 4927 | EN-Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.)-Second Edition | |
| ISO 4928 | EN-Road Vehicles - Elastomeric Cups and Seals for Cylinders for Hydraulic Braking Systems Using a Non-Petroleum Base Hydraulic Brake Fluid (Service Temperature 120 Degrees Celsius Maximum)-Third Edition | |
| ISO 4930 | EN-Road vehicles Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 °C max.)-Second Edition | |
| ISO 498 | EN-Natural Rubber Latex Concentrate - Preparation of Dry Films-Second Edition | |
| ISO 5013 | EN-Refractory Products - Determination of Modulus of Rupture at Elevated Temperatures First Edition | |
| ISO 5014 | EN-Dense and Insulating Shaped Refactory Products - Determination of Modulus of Rupture at Ambient Temperature-Second Edition | |
| ISO 5016 | EN-Shaped Insulating Refractory Products - Determination of Bulk Density and True Porosity-Second Edition | |
| ISO 5017 | EN-Dense Shaped Refractory Products - Determination of Bulk Density Apparent Porosity and True Porosity-Second Edition | |
| ISO 5018 | EN-Refractory Materials - Determination of True Density First Edition | |
| ISO 5019-1 | EN-Refractory Bricks - Dimensions - Part 1: Rectangular Bricks First Edition | |
| ISO 5019-2 | EN-Refractory Bricks - Dimensions - Part 2: Arch Bricks First Edition | |
| ISO 5019-3 | EN-Refractory Bricks - Dimensions - Part 3: Rectangular Checker Bricks for Regenerative Furnaces First Edition | |
| ISO 5019-4 | EN-Refractory Bricks - Dimensions - Part 4: Dome Bricks for Electric Arc Furnace Roofs Second Edition | |
| ISO 5019-5 | EN-Refractory Bricks - Dimensions - Part 5: Skewbacks First Edition | |
| ISO 5019-6 | EN-Refractory Bricks - Dimensions - Part 6: Basic Bricks for Oxygen Steel-Making Converters-Second edition | |
| ISO 5022 | EN-Shaped Refractory Products - Sampling and Acceptance Testing First Edition | |
| ISO 506 | EN-Rubber Latex Natural Concentrate - Determination of Volatile Fatty Acid Number-Third Edition | |
| ISO 527-1 | EN-Plastics - Determination of tensile properties - Part 1: General principles-First Edition | |
| ISO 527-1 AMD 1 | EN-Plastics - Determination of tensile properties - Part 1: General principles | |
| ISO 527-1 CORR 1 | EN-Plastics - Determination of tensile properties - Part 1: General principles-First Edition | |
| ISO 527-2 | EN-Plastics - Determination of Tensile Properties - Part 2: Test Conditions for Moulding and Extrusion Plastics-First Edition | |
| ISO 527-3 | EN-Plastics - Determination of Tensile Properties - Part 3: Test Conditions for Films and Sheets-First Edition; Technical Corrigendum 1:06-15-1998; Technical Corrigendum 2:04-15-2001 | |
| ISO 527-4 | EN-PLastics - Determination of Tensile Properties - Part 4: Test Conditions for Isotropic and Orthotropic Fibre-Reinforced Plastic Composites-First Edition; Replaces ISO 3268:1978 | |
| ISO 527-5 | EN-Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites-Second Edition | |
| ISO 528 | EN-Refractory Products - Determination of Pyrometric Cone Equivalent (Refractoriness)-First Edition | |
| ISO 5320 | EN-Solid Wood Parquet - Classification of Fir and Spruce Strips First Edition | |
| ISO 5321 | EN-Coniferous Wood Raw Parquet Blocks - General Characteristics First Edition | |
| ISO 5323 | EN-Solid Wood Parquet and Raw Parquet Blocks - Vocabulary First Edition | |
| ISO 5326 | EN-Solid Wood Paving Blocks - Hardwood Paving Blocks - Quality Requirements First Edition | |
| ISO 5327 | EN-Solid Wood Paving Blocks - General Characteristics First Edition | |
| ISO 5328 | EN-Solid Wood Paving Blocks - Softwood Paving Blocks - Quality Requirements-First Edition | |
| ISO 5329 | EN-Solid Wood Paving Blocks - Vocabulary First Edition | |
| ISO 5333 | EN-Coniferous Wood Raw Parquet Blocks - Classification of Fir and Spruce Parquet Blocks First Edition | |
| ISO 5334 | EN-Solid Wood Parquet - Classification of Maritime Pine Strips First Edition | |
| ISO 5359 | EN-Low-pressure hose assemblies for use with medical gases-Third Edition | |
| ISO 5417 | EN-Refractory Bricks for Use in Rotary Kilns - Dimensions First Edition |