ISO - Wood Glass Ceramics Rubber Plastics & other Materials Collection
This collection contains documents from the following standards organization(s): International Organization for Standardization
| ISO 3133 | EN-Wood - Determination of Ultimate Strength in Static Bending First Edition | |
| ISO 3136 | EN-Rubber Latex - Styrene-Butadiene - Determination of Bound Styrene Content Second Edition | |
| ISO 3146 | EN-Plastics - Determination of Melting Behaviour (Melting Temperature or Melting Range) of Semi-Crystalline Polymers by Capillary Tube and Polarizing-Microscope Methods-Third Edition; Technical Corrigendum 1: 10/15/2002 | |
| ISO 3167 | EN-Plastics - Multipurpose Test Specimens-Fourth Edition | |
| ISO 3179 | EN-Coniferous Sawn Timber - Nominal Dimensions First Edition | |
| ISO 3187 | EN-Refractory Products - Determination of Creep in Compression First Edition | |
| ISO 3219 | EN-Plastics - Polymers/Resins in the Liquid State or as Emulsions or Dispersions - Determination of Viscosity Using a Rotational Viscometer with Defined Shear Rate Second Edition; (CEN EN ISO 3219: 1995) | |
| ISO 3251 | EN-Paints varnishes and plastics - Determination of non-volatile-matter content-Fourth Edition | |
| ISO 3257 | EN-Rubber Compounding Ingredients - Carbon Black - Method of Evaluation in Styrene-Butadiene Rubbers Third Edition | |
| ISO 3295 | EN-Narrow Bandsaw Blades for Woodworking - Dimensions First Edition | |
| ISO 3302-1 | EN-Rubber - Tolerances for Products - Part 1: Dimensional Tolerances-First Edition; Cancels and Replaces 3302: 1990; Amendment 1:06-01-2001 | |
| ISO 3302-2 | EN-Rubber - Tolerances for products - Part 2: Geometrical tolerances-Second Edition | |
| ISO 3324-1 | EN-Aircraft Tyres and Rims - Part 1: Specifications-Fourth Edition; Corrected and Reprinted 09/15/1998 | |
| ISO 3324-2 | EN-Aircraft Tyres and Rims - Part 2: Test Methods for Tyres-Second Edition; Corrected and Reprinted 02/01/1999 | |
| ISO 3340 | EN-Fibre Building Boards - Determination of Sand Content First Edition | |
| ISO 3345 | EN-Wood - Determination of Ultimate Tensile Stress Parallel to Grain First Edition | |
| ISO 3346 | EN-Wood - Determination of Ultimate Tensile Stress Perpendicular to Grain First Edition | |
| ISO 3347 | EN-Wood - Determination of Ultimate Shearing Stress Parallel to Grain First Edition; (PNS 970: 1989) | |
| ISO 3348 | EN-Wood - Determination of Impact Bending Strength First Edition | |
| ISO 3349 | EN-Wood - Determination of Modulus of Elasticity in Static Bending First Edition; (PNS 971: 1989) | |
| ISO 3350 | EN-Wood - Determination of Static Hardness First Edition | |
| ISO 3351 | EN-Wood - Determination of Resistance to Impact Indentation First Edition | |
| ISO 3384 | EN-Rubber vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures-Fifth Edition | |
| ISO 3385 | EN-Flexible Cellular Polymeric Materials - Determination of Fatigue by Constant-Load Pounding Third Edition; (CEN EN ISO 3385: 1995) | |
| ISO 3386-1 | EN-Polymeric Materials Cellular Flexible - Determination of Stress-Strain Characteristic in Compression - Part 1: Low-Density Materials Second Edition | |
| ISO 3386-1 AMD 1 | EN-Polymeric materials cellular flexible - Determination of stress-strain characteristics in compression - Part 1: Low-density materials AMENDMENT 1-Second Edition | |
| ISO 3386-2 | EN-Flexible Cellular Polymeric Materials - Determination of Stress-Strain Characteristics in Compression - Part 2: High-Density Materials-Second Edition | |
| ISO 3386-2 AMD 1 | EN-Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials AMENDMENT 1-Second Edition | |
| ISO 3387 | EN-Rubber - Determination of Crystallization Effects by Hardness Measurements-Second Edition; Technical Corrigendum 1: 2000 | |
| ISO 3397 | EN-Broadleaved Wood Raw Parquet Blocks - General Characteristics First Edition | |
| ISO 3398 | EN-Broadleaved Wood Raw Parquet Blocks - Classification of Oak Parquet Blocks First Edition | |
| ISO 3399 | EN-Broadleaved Wood Raw Parquet Blocks - Classification of Beech Parquet Blocks First Edition | |
| ISO 34-1 | EN-Rubber vulcanized or thermoplastic Determination of tear strength Part 1: Trouser angle and crescent test pieces-Second Edition | |
| ISO 34-2 | EN-Rubber vulcanized or thermoplastic - Determination of tear strength - Part 2: Small (Delft) test pieces-Second Edition | |
| ISO 3417 | EN-Rubber - Measurement of vulcanization characteristics with the oscillating disc curemeter-Third Edition | |
| ISO 3451-1 | EN-Plastics - Determination of ash - Part 1: General methods-Fourth Edition | |
| ISO 3451-2 | EN-Plastics - Determination of Ash - Part 2: Poly(Alkylene Terephthalate) Materials-Second Edition | |
| ISO 3451-3 | EN-Plastics - Determination of Ash - Part 3: Unplasticized Cellulose Acetate-First Edition | |
| ISO 3451-4 | EN-Plastics - Determination of Ash - Part 4: Polyamides-Second Edition | |
| ISO 3451-5 | EN-Plastics - Determination of Ash - Part 5: Poly(Vinyl Chloride)-Second Edition | |
| ISO 35 | EN-Natural rubber latex concentrate - Determination of mechanical stability-Fifth Edition | |
| ISO 35 AMD 1 | EN-Natural rubber latex concentrate - Determination of mechanical stability AMENDMENT 1: Precision data-Fifth Edition | |
| ISO 3536 | EN-Road Vehicles - Safety Glazing Materials - Vocabulary-Second Edition | |
| ISO 3537 | EN-Road Vehicles - Safety Glazing Materials - Mechanical Tests-Third Edition | |
| ISO 3538 | EN-Road Vehicles - Safety Glazing Materials - Test Methods for Optical Properties-Second Edition | |
| ISO 3582 | EN-Flexible Cellular Polymeric Materials - Laboratory Assessment of Horizontal Burning Characteristics of Small Specimens Subjected to a Small Flame-Second Edition | |
| ISO 3582 AMD 1 | EN-Flexible cellular polymeric materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame AMENDMENT 1-Second Edition | |
| ISO 3585 | EN-Borosilicate Glass 3.3 - Properties-Third Edition | |
| ISO 3597-1 | EN-Textile-Glass-Reinforced Plastics - Determination of Mechanical Properties on Rods Made of Roving-Reinforced Resin - Part 1: General Considerations and Preparation of Rods-Second Edition | |
| ISO 3597-2 | EN-Textile-Glass-Reinforced Plastics - Determination of Mechanical Properties on Rods Made of Roving-Reinforced Resin - Part 2: Determination of Flexural Strength-Second Edition | |
| ISO 3597-3 | EN-Textile-Glass-Reinforced Plastics - Determination of Mechanical Properties on Rods Made of Roving-Reinforced Resin - Part 3: Determination of Compressive Strength-Second Edition | |
| ISO 3597-4 | EN-Textile-Glass-Reinforced Plastics - Determination of Mechanical Properties on Rods Made of Roving-Reinforced Resin - Part 4: Determination of Apparent Interlaminar Shear Strength-Second Edition | |
| ISO 36 | EN-Rubber Vulcanized or Thermoplastic - Determination of Adhesion to Textile Fabric-Fourth Edition | |
| ISO 3601-1 | EN-Fluid power systems - O-rings - Part 1: Inside diameters cross-sections tolerances and designation codes-Fourth Edition | |
| ISO 3601-1 CORR 1 | EN-Fluid power systems - O-rings - Part 1: Inside diameters cross-sections tolerances and designation codes TECHNICAL CORRIGENDUM 1-Fourth Edition | |
| ISO 3601-1 CORR 2 | EN-Fluid power systems - O-rings - Part 1: Inside diameters cross-sections tolerances and designation codes TECHNICAL CORRIGENDUM 2-Fourth Edition | |
| ISO 3601-2 | EN-Fluid power systems - O-rings - Part 2: Housing dimensions for general applications-First Edition | |
| ISO 3601-3 | EN-Fluid power systems - O-rings - Part 3: Quality acceptance criteria-Second Edition; Corrected and Reprinted 04/15/2006 | |
| ISO 3601-4 | EN-Fluid power systems - O-rings - Part 4: Anti-extrusion rings (back-up rings)-First Edition | |
| ISO 3601-5 | EN-Fluid Power Systems - O-Rings - Part 5: Suitability of Elastomeric Materials for Industrial Applications-First Edition | |
| ISO 3671 | EN-Plastics - Aminoplastic Moulding Materials - Determination of Volatile Matter First Edition | |
| ISO 3672-1 | EN-Plastics - Unsaturated Polyester Resins (UP-R) - Part 1: Designation System-Second Edition | |
| ISO 3672-2 | EN-Plastics - Unsaturated Polyester Resins (UP-R) - Part 2: Preparation of Test Specimens and Determination of Properties-First Edition | |
| ISO 3673-1 | EN-Plastics - Epoxy Resins - Part 1: Designation-Second Edition | |
| ISO 3673-2 | EN-Plastics - Epoxy Resins - Part 2: Preparation of Test Specimens and Determination of Properties-Second Edition | |
| ISO 37 | EN-Rubber vulcanized or thermoplastic - Determination of tensile stress-strain properties-Fourth Edition | |
| ISO 37 CORR 1 | EN-Rubber vulcanized or thermoplastic - Determination of tensile stress-strain properties TECHNICAL CORRIGENDUM 1-Fourth Edition | |
| ISO 3729 | EN-Fibre Building Boards - Determination of Surface Stability First Edition | |
| ISO 3739-1 | EN-Industrial tyres and rims - Part 1: Pneumatic tyres (metric series) on 5° tapered or flat base rims - Designation dimensions and marking-Second Edition | |
| ISO 3739-2 | EN-Industrial Tyres and Rims - Part 2: Pneumatic Tyres (Metric Series) on 5 Degree Tapered or Flat Base Rims - Load Ratings First Edition | |
| ISO 3810 | EN-Floor Tiles of Agglomerated Cork - Methods of Test Second Edition; (Corrected and Reprinted - 1992) | |
| ISO 3813 | EN-Resilient floor coverings Cork floor tiles Specification-Third Edition | |
| ISO 3821 | EN-Gas welding equipment - Rubber hoses for welding cutting and allied processes-Fourth Edition | |
| ISO 3850 | EN-Resilient floor coverings Determination of apparent density of composition cork-First Edition | |
| ISO 3858 | EN-Rubber compounding ingredients - Carbon black - Determination of light transmittance of toluene extract-Third Edition | |
| ISO 3861 | EN-Rubber Hoses for Sand and Grit Blasting - Specification-Third edition | |
| ISO 3862 | EN-Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or waterbased fluids - Specification-Third Edition | |
| ISO 3863 | EN-Cylindrical Cork Stoppers - Dimensional Characteristics Sampling Packaging and Marking Second Edition | |
| ISO 3865 | EN-Rubber vulcanized or thermoplastic Methods of test for staining in contact with organic material-Fourth Edition |