ISO - Test Photography & Precision Engineering Collection
This collection contains documents from the following standards organization(s): International Organization for Standardization
| ISO 5168 | EN-Measurement of fluid flow - Procedures for the evaluation of uncertainties-Second edition; Cancels and replaces ISO/TR 5168:1998 | |
| ISO 517 | EN-Photography - Apertures and related properties pertaining to photographic lenses - Designations and measurements-Third Edition | |
| ISO 518 | EN-Photography Camera accessory shoes with and without electrical contacts for photoflash lamps and electronic photoflash units Specification-Second Edition | |
| ISO 519 | EN-Photography - Hand-Held Cameras - Flash-Connector Dimensions-Second Edition | |
| ISO 5263-1 | EN-Pulps Laboratory wet disintegration Part 1: Disintegration of chemical pulps-First Edition; Together With ISO 5263-2:2004 and ISO 5263-3:2004 Replaces ISO 5263:1995 | |
| ISO 5263-2 | EN-Pulps Laboratory wet disintegration Part 2: Disintegration of mechanical pulps at 20 °C-First Edition; Together With ISO 5263-1:2004 and ISO 5263-3:2004 Replaces ISO 5263:1995 | |
| ISO 5263-3 | EN-Pulps Laboratory wet disintegration Part 3: Disintegration of mechanical pulps at greater than or equal to 85 °C-First Edition; Together with ISO 5263-1:2004 and ISO 5263-2:2004 Replaces ISO 5263:1995 | |
| ISO 5264-1 | EN-Pulps - Laboratory Beating - Part 1: Valley Beater Method First Edition | |
| ISO 5264-2 | EN-Pulps Laboratory beating Part 2: PFI mill method-Second Edition | |
| ISO 5267-1 | EN-Pulps - Determination of Drainability - Part 1: Schopper-Riegler Method-Second Edition; Technical Corrigendum 1-03/01/2001 | |
| ISO 5267-2 | EN-Pulps - Determination of Drainability - Part 2: "Canadian Standard" Freeness Method-Second Edition | |
| ISO 5269-1 | EN-Pulps Preparation of laboratory sheets for physical testing Part 1: Conventional sheet-former method-Third Edition | |
| ISO 5269-2 | EN-Pulps Preparation of laboratory sheets for physical testing Part 2: Rapid-Köthen method-Third Edition | |
| ISO 5269-3 | EN-Pulps - Preparation of laboratory sheets for physical testing - Part 3: Conventional and Rapid-Köthen sheet formers using a closed water system-First Edition | |
| ISO 5270 | EN-Pulps - Laboratory Sheets - Determination of Physical Properties-Second Edition | |
| ISO 532 | EN-Acoustics - Method for Calculating Loudness Level-First Edition | |
| ISO 534 | EN-Paper and Board - Determination of Thickness and Apparent Bulk Density or Apparent Sheet Density-Third Edition | |
| ISO 5344 | EN-Electrodynamic vibration generating systems Performance characteristics-Second Edition | |
| ISO 5347-10 | EN-Methods for the Calibration of Vibration and Shock Pick-Ups - Part 10: Primary Calibration by High Impact Shocks First Edition | |
| ISO 5347-12 | EN-Methods for the Calibration of Vibration and Shock Pick-Ups - Part 12: Testing of Transverse Shock Sensitivity First Edition | |
| ISO 5347-13 | EN-Methods for the Calibration of Vibration and Shock Pick-Ups - Part 13: Testing of Base Strain Sensitivity First Edition | |
| ISO 5347-14 | EN-Methods for the Calibration of Vibration and Shock Pick-Ups - Part 14: Resonance Frequency Testing of Undamped Accelerometers on a Steel Block First Edition | |
| ISO 5347-15 | EN-Methods for the Calibration of Vibration and Shock Pick-Ups - Part 15: Testing of Acoustic Sensitivity First Edition | |
| ISO 5347-16 | EN-Methods for the Calibration of Vibration and Shock Pick-Ups - Part 16: Testing of Mounting Torque Sensitivity First Edition | |
| ISO 5347-17 | EN-Methods for the Calibration of Vibration and Shock Pick-Ups - Part 17: Testing of Fixed Temperature Sensitivity First Edition | |
| ISO 5347-18 | EN-Methods for the Calibration of Vibration and Shock Pick-Ups - Part 18: Testing of Transient Temperature Sensitivity First Edition | |
| ISO 5347-19 | EN-Methods for the Calibration of Vibration and Shock Pick-Ups - Part 19: Testing of Magnetic Field Sensitivity First Edition | |
| ISO 5347-22 | EN-Methods for the Calibration of Vibration and Shock Pick-Ups - Part 22: Accelerometer Resonance Testing - General Methods-First Edition | |
| ISO 5347-5 | EN-Methods for the Calibration of Vibration and Shock Pick-Ups - Part 5: Calibration by Earth´s Gravitation First Edition | |
| ISO 5347-7 | EN-Methods for the Calibration of Vibration and Shock Pick-Ups - Part 7: Primary Calibration by Centrifuge First Edition | |
| ISO 5347-8 | EN-Methods for the Calibration of Vibration and Shock Pick-Ups - Part 8: Primary Calibration by Dual Centrifuge First Edition | |
| ISO 5348 | EN-Mechanical Vibration and Shock - Mechanical Mounting of Accelerometers-Second Edition | |
| ISO 535 | EN-Paper and Board - Determination of Water Absorptiveness - Cobb Method-Second Edition; CEN EN 20535: 1994 | |
| ISO 5350-1 | EN-Pulps Estimation of dirt and shives Part 1: Inspection of laboratory sheets by transmitted light-Third Edition | |
| ISO 5350-2 | EN-Pulps Estimation of dirt and shives Part 2: Inspection of mill sheeted pulp by transmitted light-Third Edition | |
| ISO 5350-3 | EN-Pulps - Estimation of dirt and shives - Part 3: Visual inspection by reflected light using Equivalent Black Area (EBA) method-Second Edition | |
| ISO 5350-4 | EN-Pulps Estimation of dirt and shives Part 4: Instrumental inspection by reflected light using Equivalent Black Area (EBA) method-First Edition;: 1999 | |
| ISO 5351 | EN-Pulps - Determination of limiting viscosity number in cupriethylenediamine (CED) solution-Second Edition | |
| ISO 536 | EN-Paper and Board - Determination of Grammage-Second Edition | |
| ISO 5436-1 | EN-Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Measurement Standards - Part 1: Material Measures-First Edition; Together with ISO 5436-2 Replaces ISO 5436 | |
| ISO 5436-2 | EN-Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Measurement Standards - Part 2: Software Measurement Standards-First Edition | |
| ISO 5436-2 CORR 1 | EN-Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards Part 2: Software measurement standards TECHNICAL CORRIGENDUM 1 | |
| ISO 5436-2 CORR 2 | EN-Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards TECHNICAL CORRIGENDUM 2 | |
| ISO 5458 | EN-Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Positional Tolerancing-Second Edition | |
| ISO 5479 | EN-Statistical Interpretation of Data - Tests for Departure from the Normal Distribution-First Edition | |
| ISO 554 | EN-Standard Atmospheres for Conditioning and/or Testing - Specifications-First Edition | |
| ISO 5576 | EN-Non-Destructive Testing - Industrial X-Ray and Gamma-Ray Radiology - Vocabulary-First Edition | |
| ISO 5577 | EN-Non-Destructive Testing - Ultrasonic Inspection - Vocabulary-First Edition | |
| ISO 558 | EN-Conditioning and Testing - Standard Atmospheres - Definitions-First Edition | |
| ISO 5580 | EN-Non-Destructive Testing - Industrial Radiographic Illuminators - Minimum Requirements First Edition | |
| ISO 5626 | EN-Paper - Determination of Folding Endurance Second Edition | |
| ISO 5627 | EN-Paper and Board - Determination of Smoothness (Bekk Method)-Second Edition: Corrigendum 6/15/2002 | |
| ISO 5628 | EN-Paper and Board - Determination of Bending Stiffness by Static Methods - General Principles First Edition | |
| ISO 5629 | EN-Paper and Board - Determination of Bending Stiffness - Resonance Method First Edition | |
| ISO 5630-1 | EN-Paper and Board - Accelerated Ageing - Part 1: Dry Heat Treatment at 105 Degrees Celsius Second Edition | |
| ISO 5630-3 | EN-Paper and Board - Accelerated Ageing - Part 3: Moist Heat Treatment at 80 Degrees C and 65% Relative Humidity Second Edition | |
| ISO 5630-4 | EN-Paper and Board - Accelerated Ageing - Part 4: Dry Heat Treatment at 120 or 150 Degrees Celsius First Edition | |
| ISO 5630-5 | EN-Paper and board - Accelerated ageing - Part 5: Exposure to elevated temperature at 100 °C-First Edition | |
| ISO 5630-6 | EN-Paper and board - Accelerated ageing - Part 6: Exposure to atmospheric pollution (nitrogen dioxide)-First Edition | |
| ISO 5631-1 | EN-Paper and board - Determination of colour by diffuse reflectance - Part 1: Indoor daylight conditions (C/2 degrees)-First Edition | |
| ISO 5631-2 | EN-Paper and board - Determination of colour by diffuse reflectance - Part 2: Outdoor daylight conditions (D65/10 Degree)-First Edition | |
| ISO 5631-3 | EN-Paper and board - Determination of colour by diffuse reflectance - Part 3: Indoor illumination conditions (D50/2 Degree)-First Edition | |
| ISO 5633 | EN-Paper and Board - Determination of Resistance to Water Penetration First Edition | |
| ISO 5635 | EN-Paper - Measurement of Dimensional Change After Immersion in Water First Edition; (Erratum-1982) | |
| ISO 5636-1 | EN-Paper and Board - Determination of Air Permeance (Medium Range) - Part 1: General Method First Edition | |
| ISO 5636-3 | EN-Paper and Board - Determination of Air Permeance (Medium Range) - Part 3: Bendtsen Method Second Edition | |
| ISO 5636-4 | EN-Paper and board Determination of air permeance (medium range) Part 4: Sheffield method-Second Edition | |
| ISO 5636-5 | EN-Paper and board Determination of air permeance and air resistance (medium range) Part 5: Gurley method-Second Edition | |
| ISO 5637 | EN-Paper and Board - Determination of Water Absorption After Immersion in Water Second Edition | |
| ISO 5638 | EN-Solid Fibreboard - Determination of Grammage of Single Layers First Edition | |
| ISO 5647 | EN-Paper and Board - Determination of Titanium Dioxide Content First Edition | |
| ISO 565 | EN-Test Sieves - Metal Wire Cloth Perforated Metal Plate and Electroformed Sheet - Nominal Sizes of Openings-Third Edition | |
| ISO 5655 | EN-Photography - Industrial Radiographic Films (Roll and Sheet) and Metal Intensifying Screens - Dimensions-Third Edition | |
| ISO 5725-1 | EN-Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 1: General Principles and Definitions-First Edition; Corrigendum 1-1998 | |
| ISO 5725-2 | EN-Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 2: Basic Method for the Determination of Repeatability and Reproducibility of a Standard Measurement Method First Edition;-Technical Corrige | |
| ISO 5725-3 | EN-Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 3: Intermediate Measures of the Precision of a Standard Measurement Method-First Edition; Replaces ISO 5725; Corrigendum 1 10/15/2001 | |
| ISO 5725-4 | EN-Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 4: Basic Methods for the Determination of the Trueness of a Standard Measurement Method First Edition; | |
| ISO 5725-5 | EN-Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 5: Alternative Methods for the Determination of the Precision of a Standard Measurement Method-First Edition; Corrigendum 1: 8/15/2005 | |
| ISO 5725-6 | EN-Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 6: Use in Practice of Accuracy Values-First Edition; Replaces ISO 5725; Corrigendum 1:10/15/2001 |