ISO - Petroleum Products Paints Coatings & Adhesives Collection
This collection contains documents from the following standards organization(s): International Organization for Standardization
| ISO 1158 | EN-Plastics - Vinyl Chloride Homopolymers and Copolymers - Determination of Chlorine Content-Third Edition | |
| ISO 1163-1 | EN-Plastics - Unplasticized Poly(Vinyl Chloride) (PVC-U) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications-Third Edition | |
| ISO 1163-2 | EN-Plastics - Unplasticized Poly(Vinyl Chloride) (PVC-U) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties-Second Edition | |
| ISO 11667 | EN-Fibre-Reinforced Plastics - Moulding Compounds and Prepregs - Determination of Resin Reinforced-Fibre and Mineral-Filler Content - Dissolution Methods-First Edition | |
| ISO 11668 | EN-Binders for Paints and Varnishes - Chlorinated Polymerization Resins - General Methods of Test-First Edition | |
| ISO 1170 | EN-Coal and coke - Calculation of analyses to different bases-Second Edition | |
| ISO 1171 | EN-Solid mineral fuels - Determination of ash-Fourth Edition | |
| ISO 1172 | EN-Textile-Glass-Reinforced Plastics - Prepregs Moulding Compounds and Laminates - Determination of the Textile-Glass and Mineral-Filler Content - Calcination Methods-Second Edition | |
| ISO 11726 | EN-Solid mineral fuels Guidelines for the validation of alternative methods of analysis-First Edition | |
| ISO 11752 | EN-Flexible Cellular Polymeric Materials - Moulded and Extruded Sponge or Expanded Cellular Rubber Products - Compressibility Test on Finished Parts-First Edition; Amendment 1: 09/15/2006 | |
| ISO 11759 | EN-Rubber Hoses and Hose Assemblies for Dispensing Liquefied Petroleum Gases (LPGs) - Specification-First Edition | |
| ISO 11795 | EN-Agricultural Tractor Drive Wheel Tyres - Method of Measuring Tyre Rolling Circumference-First Edition | |
| ISO 11795 AMD 1 | EN-Agricultural tractor drive wheel tyres - Method of measuring tyre rolling circumference AMENDMENT 1-First Edition | |
| ISO 1183-1 | EN-Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method liquid pyknometer method and titration method-First Edition; Together with 1183-2 and 1183-3 replaces 1183:1987 | |
| ISO 1183-2 | EN-Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method-First Edition; Replaces ISO 1183:1987 | |
| ISO 1183-3 | EN-Plastics - Methods for Determining the Density of Non-Cellular Plastics - Part 3: Gas Pyknometer Method-First Edition | |
| ISO 11833-1 | EN-Plastics - Unplasticized poly(vinyl chloride) sheets - Types dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm-Second Edition | |
| ISO 11833-2 | EN-Plastics - Unplasticized Poly(Vinyl Chloride) Sheets - Types Dimensions and Characteristics - Part 2: Sheets of Thickness Less Than 1 mm-First Edition | |
| ISO 11890-1 | EN-Paints and Varnishes - Determination of Volatile Organic Compound (VOC) Content - Part 1: Difference Method-Second Edition | |
| ISO 11890-2 | EN-Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method-Second Edition | |
| ISO 119 | EN-Plastics - Phenol-Formaldehyde Mouldings - Determination of Free Phenols - Iodometric Method-First Edition; | |
| ISO 11907-1 | EN-Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 1: Guidance-First Edition | |
| ISO 11907-2 | EN-Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 2: Static Method First Edition | |
| ISO 11907-3 | EN-Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 3: Dynamic Decomposition Method Using a Travelling Furnace-First Edition | |
| ISO 11907-4 | EN-Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 4: Dynamic Decomposition Method Using a Conical Radiant Heater-First Edition | |
| ISO 11908 | EN-Binders for Paints and Varnishes - Amino Resins - General Methods of Test First Edition | |
| ISO 11909 | EN-Binders for paints and varnishes - Polyisocyanate resins - General methods of test-Second Edition | |
| ISO 11960 | EN-Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells-Third Edition | |
| ISO 11960 CORR 1 | EN-Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells TECHNICAL CORRIGENDUM 1-Third Edition | |
| ISO 11961 | EN-Petroleum and natural gas industries - Steel drill pipe-Second Edition | |
| ISO 11961 CORR 1 | EN-Petroleum and natural gas industries - Steel drill pipe TECHNICAL CORRIGENDUM 1-Second Edition | |
| ISO 11963 | EN-Plastics - Polycarbonate Sheets - Types Dimensions and Characteristics First Edition (CEN EN ISO 11963: 1995) | |
| ISO 11997-1 | EN-Paints and varnishes Determination of resistance to cyclic corrosion conditions Part 1: Wet (salt fog)/dry/humidity-Second Edition | |
| ISO 11997-2 | EN-Paints and Varnishes - Determination of Resistance to Cyclic Corrosion Conditions - Part 2: Wet (Salt Fog)/Dry/Humidity/UV Light-First Edition | |
| ISO 11998 | EN-Paints and varnishes Determination of wet-scrub resistance and cleanability of coatings-Second Edition | |
| ISO 120 | EN-Plastics - Phenol-Formaldehyde Mouldings - Determination of Free Ammonia and Ammonium Compounds - Colorimetric Comparison Method-First Edition | |
| ISO 12000 | EN-Plastics/Rubber - Polymer Dispersions and Rubber Latices (Natural and Synthetic) - Definitions and Review of Test Methods-Second Edition | |
| ISO 12017 | EN-Plastics - Poly(Methyl Methacrylate) Double- and Triple-Skin Sheets - Test Methods First Edition-CEN EN ISO 12 017: 1996 | |
| ISO 12040 | EN-Graphic Technology - Prints and Printing Inks - Assessment of Light Fastness Using Filtered Xenon Arc Light-First Edition | |
| ISO 12058-1 | EN-Plastics - Determination of Viscosity Using a Falling-Ball Viscometer - Part 1: Inclined-Tube Method-First Edition; Cancels and Replaces Annex B of ISO 9371 | |
| ISO 12086-1 | EN-Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications-Second Edition | |
| ISO 12086-1 CORR 1 | EN-Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications TECHNICAL CORRIGENDUM 1-Second Edition | |
| ISO 12086-2 | EN-Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties-Second Edition | |
| ISO 12086-2 CORR 1 | EN-Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties TECHNICAL CORRIGENDUM 1-Second Edition | |
| ISO 1209-1 | EN-Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test-Third Edition | |
| ISO 1209-2 | EN-Rigid cellular plastics Determination of flexural properties Part 2: Determination of flexural strength and apparent flexural modulus of elasticity-Third Edition | |
| ISO 12114 | EN-Fibre-Reinforced Plastics - Thermosetting Moulding Compounds and Prepregs - Determination of Cure Characteristics-First Edition | |
| ISO 12115 | EN-Fibre-Reinforced Plastics - Thermosetting Moulding Compounds and Prepregs - Determination of Flowability Maturation and Shelf Life-First Edition; Technical Corrigendum: 11-15-1998 | |
| ISO 1213-2 | EN-Solid Mineral Fuels - Vocabulary - Part 2: Terms Relating to Sampling Testing and Analysis-First Edition | |
| ISO 12137-1 | EN-Paints and Varnishes - Determination of Mar Resistance - Part 1: Method Using a Curved Stylus-First Edition; Technical Corrigendum 1: 12-15-1998 | |
| ISO 12137-2 | EN-Paints and Varnishes - Determination of Mar Resistance - Part 2: Method Using a Pointed Stylus-First Edition | |
| ISO 12156-1 | EN-Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method-Second Edition | |
| ISO 12156-2 | EN-Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 2: Limit-Second Edition | |
| ISO 12170 | EN-Gas Welding Equipment - Thermoplastic Hoses for Welding and Allied Processes First Edition | |
| ISO 12176-1 | EN-Plastics pipes and fittings Equipment for fusion jointing polyethylene systems Part 1: Butt fusion-Second Edition | |
| ISO 12176-2 | EN-Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Electrofusion-Second Edition | |
| ISO 12176-3 | EN-Plastics Pipes and Fittings - Equipment for Fusion Jointing Polyethylene Systems - Part 3: Operator's Badge-Second Edition | |
| ISO 12176-4 | EN-Plastics Pipes and Fittings - Equipment for fusion Jointing Polyethylene Systems - Part 4: Traceability Coding-First Edition | |
| ISO 12185 | EN-Crude Petroleum and Petroleum Products - Determination of Density - Oscillating U-Tube Method-First Edition; Technical Corrigendum 1:8-15-2001 | |
| ISO 12205 | EN-Petroleum Products - Determination of the Oxidation Stability of Middle-Distillate Fuels First Edition (CEN EN ISO 12205: 1996) | |
| ISO 12213-1 | EN-Natural gas Calculation of compression factor Part 1: Introduction and guidelines-Second Edition | |
| ISO 12213-2 | EN-Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis-Second Edition | |
| ISO 12213-3 | EN-Natural gas Calculation of compression factor Part 3: Calculation using physical properties-Second Edition | |
| ISO 12213-3 DAM 1 | ||
| ISO 12243 | EN-Medical gloves made from natural rubber latex Determination of water-extractable protein using the modified Lowry method-First Edition | |
| ISO 123 | EN-Rubber Latex - Sampling-Third Edition | |
| ISO 124 | EN-Latex rubber - Determination of total solids content-Fifth Edition | |
| ISO 1247 | EN-Aluminium Pigments for Paints-First Edition; Amendment 1-1982 | |
| ISO 1248 | EN-Iron oxide pigments Specifications and methods of test-Second Edition | |
| ISO 1248 CORR 1 | EN-Iron oxide pigments - Specifications and methods of test TECHNICAL CORRIGENDUM 1 | |
| ISO 1248 CORR 2 | EN-Iron oxide pigments - Specifications and methods of test TECHNICAL CORRIGENDUM 2 | |
| ISO 1249 | EN-Zinc Chromate Pigments - Basic Zinc Potassium Chromate Pigments and Zinc Tetrahydroxychromate Pigments-First Edition; Corrigendum 1-1992 | |
| ISO 125 | EN-Natural Rubber Latex Concentrate - Determination of Alkalinity-Fifth Edition | |
| ISO 126 | EN-Natural rubber latex concentrate Determination of dry rubber content-Fifth edition | |
| ISO 12634 | EN-Graphic Technology - Determination of Tack of Paste Inks and Vehicles by a Rotary Tackmeter First Edition | |
| ISO 1264 | EN-Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride - Determination of pH of Aqueous Extract-Second Edition | |
| ISO 12644 | EN-Graphic Technology - Determination of Rheological Properties of Paste Inks and Vehicles by the Falling Rod Viscometer-First Edition | |
| ISO 1265 | EN-Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles-Second Edition | |
| ISO 1268-1 | EN-Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 1: General Conditions-First Edition |