ISO - Non-Metals Collection
This collection contains documents from the following standards organization(s): International Organization for Standardization
| ISO 1873-1 | EN-Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications-Fourth Edition; CEN EN ISO 1873-1: 1995 | |
| ISO 1873-2 | EN-Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties-Third Edition | |
| ISO 1874-1 | EN-Plastics - Polyamide (PA) Moulding and Extrusion Materials - Part 1: Designation-Second Edition; Corrected and Reprinted - 1992 | |
| ISO 1874-2 | EN-Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties-Third Edition | |
| ISO 1875 | EN-Plastics - Plasticized Cellulose Acetate - Determination of Matter Extractable by Diethyl Ether-First Edition | |
| ISO 18752 | EN-Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification-First Edition | |
| ISO 188 | EN-Rubber Vulcanized or Thermoplastic - Accelerated Ageing and Heat Resistance Tests-Fourth Edition | |
| ISO 18852 | EN-Rubber compounding ingredients Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)-First edition | |
| ISO 1887 | EN-Textile Glass - Determination of Combustible-Matter Content-Third Edition | |
| ISO 18872 | EN-Plastics - Determination of tensile properties at high strain rates-First Edition | |
| ISO 1888 | EN-Textile glass Staple fibres or filaments Determination of average diameter-Third Edition | |
| ISO 1889 | EN-Reinforcement yarns - Determination of linear density-Fourth Edition | |
| ISO 18898 | EN-Rubber Calibration and verification of hardness testers-First Edition | |
| ISO 18899 | EN-Rubber Guide to the calibration of test equipment-First Edition | |
| ISO 1890 | EN-Reinforcement yarns - Determination of twist-Fourth Edition | |
| ISO 1893 | EN-Refractory products - Determination of refractoriness under load - Differential method with rising temperature-Third Edition | |
| ISO 19003 | EN-Rubber and rubber products Guidance on the application of statistics to physical testing-First Edition | |
| ISO 19004 | EN-Rubber and rubber products Determination of the sensitivity of test methods-First Edition | |
| ISO 19013-1 | EN-Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 1: Diesel fuels-First Edition; Together with ISO 19013-2 Replaces ISO 4639-1: 1987 ISO 4639-2: 1995 ISO 4639-3: 1995 | |
| ISO 19013-2 | EN-Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 2: Gasoline fuels-First Edition; Together with ISO 19013-1 Replaces ISO 4639-1: 1987 ISO 4639-2: 1995 ISO 4639-3: 1995 | |
| ISO 19212 | EN-Adhesives Determination of temperature dependence of shear strength-First Edition | |
| ISO 1922 | EN-Rigid Cellular Plastics - Determination of Shear Strength-Third Edition | |
| ISO 1923 | EN-Cellular Plastics and Rubbers - Determination of Linear Dimensions-Second Edition; CEN PREN 21923: 1994; CEN EN ISO 1923: 1995 | |
| ISO 1924-2 | EN-Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (20 mm/min)-Third Edition | |
| ISO 1924-3 | EN-Paper and board Determination of tensile properties Part 3: Constant rate of elongation method (100 mm/min)-First Edition | |
| ISO 19252 | EN-Plastics - Determination of scratch properties-First Edition | |
| ISO 1926 | EN-Rigid cellular plastics - Determination of tensile properties-Fourth Edition | |
| ISO 1927 | EN-Prepared Unshaped Refractory Materials (Dense and Insulating) - Classification-Second Edition | |
| ISO 19712-1 | EN-Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications-First Edition | |
| ISO 19712-2 | EN-Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods-First Edition | |
| ISO 19712-3 | EN-Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes-First Edition | |
| ISO 1974 | EN-Paper - Determination of Tearing Resistance (Elmendorf Method)-Third Edition; CEN EN 21974: 1994; PNS 316: 1989) | |
| ISO 1997 | EN-Granulated Cork and Cork Powder - Classification Properties and Packing-Second Edition | |
| ISO 2000 | EN-Rubber raw natural Guidelines for the specification of technically specified rubber (TSR)-Sixth Edition | |
| ISO 2004 | EN-Natural rubber latex concentrate - Centrifuged or creamed ammonia-preserved types - Specifications-Fifth Edition | |
| ISO 2005 | EN-Rubber Latex Natural Concentrate - Determination of Sludge Content-Third Edition; Amendment 1: 02/01/2006 | |
| ISO 2006-1 | EN-Rubber latex synthetic - Determination of mechanical stability - Part 1: High-speed method-First Edition | |
| ISO 2006-2 | EN-Rubber latex synthetic - Determination of mechanical stability - Part 2: Moderate-speed method under load-First Edition | |
| ISO 2007 | EN-Rubber Unvulcanized - Determination of Plasticity - Rapid-Plastimeter Method-Fourth Edition | |
| ISO 20182 | EN-Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns-Second Edition | |
| ISO 20200 | EN-Plastics Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test-First Edition | |
| ISO 2027 | EN-Natural Rubber Latex Concentrate Evaporated Preserved - Specification-Third Edition | |
| ISO 2028 | EN-Synthetic Rubber Latex - Preparation of Dry Polymer-Fourth Edition | |
| ISO 20299-1 | EN-Film for wrapping rubber bales Part 1: Butadiene rubber (BR) and styrenebutadiene rubber (SBR)-First Edition | |
| ISO 20299-1 CORR 1 | EN-Film for wrapping rubber bales - Part 1: Butadiene rubber (BR) and styrene-butadiene rubber (SBR) TECHNICAL CORRIGENDUM 1-First Edition | |
| ISO 20299-2 | EN-Film for wrapping rubber bales Part 2: Natural rubber-First Edition | |
| ISO 20299-3 | EN-Film for wrapping rubber bales - Part 3: Ethylene-propylene-diene rubber (EPDM) acrylonitrile-butadiene rubber (NBR) hydrogenated nitrile-butadiene rubber (HNBR) acrylic-ethylene rubber (AEM) and acrylic rubber | |
| ISO 2030 | EN-Granulated Cork - Size Analysis by Mechanical Sieving-Second Edition | |
| ISO 2031 | EN-Granulated Cork - Determination of Bulk Density-Second Edition | |
| ISO 2039-1 | EN-Plastics - Determination of Hardness - Part 1: Ball Indentation Method-Third Edition | |
| ISO 2039-2 | EN-Plastics - Determination of Hardness - Part 2: Rockwell Hardness-Second Edition | |
| ISO 20392 | EN-Thermal-insulating materials - Determination of compressive creep-First Edition | |
| ISO 20393 | EN-Thermal-insulating materials - Determination of long-term water absorption by diffusion-First Edition | |
| ISO 20394 | EN-Thermal-insulating materials - Determination of freeze-thaw resistance-First Edition | |
| ISO 20565-1 | EN-Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 1: Apparatus reagents dissolution and determination of gravimetric si | |
| ISO 20565-2 | EN-Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis-First Edition | |
| ISO 20565-3 | EN-Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled | |
| ISO 2066 | EN-Resilient floor coverings Determination of moisture content of agglomerated composition cork-Third Edition | |
| ISO 2067 | EN-Granulated Cork - Sampling-Third Edition | |
| ISO 20752 | EN-Cork stoppers - Determination of releasable 2 4 6-trichloroanisol (TCA)-First edition | |
| ISO 20753 | EN-Plastics - Test specimens-First Edition | |
| ISO 2078 | EN-Textile Glass - Yarns - Designation-Fifth Edition; CEN EN ISO 2078: 1994 | |
| ISO 20965 | EN-Plastics Determination of the transient extensional viscosity of polymer melts-First Edition | |
| ISO 21048 | EN-Plastics Epoxy resins Determination of 12-glycol content-First Edition | |
| ISO 21068-1 | EN-Chemical analysis of silicon-carbidecontaining raw materials and refractory products - Part 1: General information and sample preparation-First Edition | |
| ISO 21068-2 | EN-Chemical analysis of silicon-carbidecontaining raw materials and refractory products - Part 2: Determination of loss on ignition total carbon free carbon and silicon carbide total and free silica and total and f | |
| ISO 21068-3 | EN-Chemical analysis of silicon-carbidecontaining raw materials and refractory products - Part 3: Determination of nitrogen oxygen and metallic and oxidic constituents-First Edition | |
| ISO 21078-1 | EN-Determination of boron(III) oxide in refractory products - Part 1: Determination of total boron(III) oxide in oxidic materials for ceramics glass and glazes-First Edition | |
| ISO 21078-2 | EN-Determination of boron(III) oxide in refractory products Part 2: Acid extraction method for the determination of boron(III) oxide in binder components-First Edition | |
| ISO 21079-1 | EN-Chemical analysis of refractories containing alumina zirconia and silica - Refractories containing 5 % to 45 % of ZrO2 (alternative to the X-ray fluorescence method) - Part 1: Apparatus reagents and dissolution | |
| ISO 21079-2 | EN-Chemical analysis of refractories containing alumina zirconia and silica - Refractories containing 5 % to 45 % of ZrO2 (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis-First Editio | |
| ISO 21079-3 | EN-Chemical analysis of refractories containing alumina zirconia and silica - Refractories containing 5 % to 45 % of ZrO2 (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectropho | |
| ISO 21128 | EN-Cork Stoppers Determination of Oxidizing Residues Iodometric Titration Method-First Edition | |
| ISO 2113 | EN-Reinforcement fibres - Woven fabrics - Basis for a specification-Second Edition; Corrigendum 1: 2/15/2003 | |
| ISO 2114 | EN-Plastics - (Polyester Resins) and Paints and Varnishes (Binders) - Determination of Partial Acid Value and Total Acid Value-Third Edition; Replaces ISO 3682 | |
| ISO 2115 | EN-Plastics - Polymer Dispersions - Determination of White Point Temperature and Minimum Film-Forming Temperature-Third Edition | |
| ISO 21171 | EN-Medical gloves Determination of removable surface powder-First Edition | |
| ISO 21318 | EN-Plastics - Epoxy resins - Determination of electrical conductivity of aqueous resin extracts-First Edition | |
| ISO 21367 | EN-Plastics - Reaction to fire - Test method for flame spread and combustion product release from vertically oriented specimens-First Edition |