Print Page Email Page Smaller Text Larger Text

ISO - Non-Metals Collection

This collection contains documents from the following standards organization(s): International Organization for Standardization

Most Popular Standards from the ISO - Non-Metals Collection

ISO 11469 EN-Plastics - Generic Identification and Marking of Plastic Products-Second Edition 
ISO 1133 EN-Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics-Fourth edition 
ISO 1043-1 EN-Plastics - Symbols and Abbreviated Terms - Part 1: Basic Polymers and Their Special Characteristics-Third Edition 
ISO 22196 EN-Plastics - Measurement of antibacterial activity on plastics surfaces-First Edition 
ISO 178 EN-Plastics - Determination of Flexural Properties-Fourth Edition; Amendment 1: 02/15/2004 
ISO 3386-1 EN-Polymeric Materials Cellular Flexible - Determination of Stress-Strain Characteristic in Compression - Part 1: Low-Density Materials Second Edition 
ISO 11359-2 EN-Plastics - Thermomechanical Analysis (TMA) - Part 2: Determination of Coefficient of Linear Thermal Expansion and Glass Transition Temperature-First Edition 
ISO 11359-1 EN-Plastics - Thermomechanical Analysis (TMA) - Part 1: General Principles-First Edition 
ISO 7214 EN-Cellular Plastics - Polyethylene - Methods of Test-Third Edition 
ISO 13006 EN-Ceramic Tiles - Definitions Classification Characteristics and Marking-First Edition 
ISO 868 EN-Plastics and Ebonite - Determination of Indentation Hardness by Means of a Durometer (Shore Hardness)-Third Edition 
ISO 6603-1 EN-Plastics - Determination of Puncture Impact Behaviour of Rigid Plastics - Part 1: Non-Instrumented Impact Testing-Second Edition 
ISO 527-2 EN-Plastics - Determination of Tensile Properties - Part 2: Test Conditions for Moulding and Extrusion Plastics-First Edition 
ISO 1043-2 EN-Plastics - Symbols and Abbreviated Terms - Part 2: Fillers and Reinforcing Materials-Second Edition 
ISO 4892-1 EN-Plastics - Methods of Exposure to Laboratory Light Sources - Part 1: General Guidance-Second Edition 
ISO 10964 EN-Adhesives - Determination of Torque Strength of Anaerobic Adhesives on Threaded Fasteners First Edition 
ISO 75-2 EN-Plastics - Determination of Temperature of Deflection under Load - Part 2: Plastics and Ebonite-Second Edition 
ISO 3167 EN-Plastics - Multipurpose Test Specimens-Fourth Edition 
ISO 13586 EN-Plastics Determination of fracture toughness (GIC and KIC) Linear elastic fracture mechanics (LEFM) approach AMENDMENT 1: Guidelines for the testing of injection-moulded plastics containing discontinuous reinforcin 
ISO 536 EN-Paper and Board - Determination of Grammage-Second Edition 
ISO 306 EN-Plastics Thermoplastic materials Determination of Vicat softening temperature (VST)-Fourth Edition 
ISO 2039-2 EN-Plastics - Determination of Hardness - Part 2: Rockwell Hardness-Second Edition 
ISO 10545-1 EN-Ceramic Tiles - Part 1: Sampling and Basis for Acceptance First Edition 
ISO 180 EN-Plastics - Determination of Izod Impact Strength-Third Edition; Amendment 1: 12/1/2006 
ISO 13003 EN-Fibre-reinforced plastics - Determination of fatigue properties under cyclic loading conditions-First Edition 
ISO 10545-11 EN-Ceramic Tiles - Part 11: Determination of Crazing Resistance for Glazed Tiles First Edition-CEN EN ISO 10 545-11: 1996 
ISO 14855-2 EN-Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxid 
ISO 179-2 EN-Plastics - Determination of Charpy Impact Properties - Part 2: Instrumented Impact Test-First Edition; Technical Corrigendum 1: 11-15-1998 
ISO 75-1 EN-Plastics - Determination of Temperature of Deflection under Load - Part 1: General Test Method-Second Edition 
ISO 1183-1 EN-Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method liquid pyknometer method and titration method-First Edition; Together with 1183-2 and 1183-3 replaces 1183:1987 
ISO 48 EN-Rubber vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)-Fourth Edition 
ISO 1874-1 EN-Plastics - Polyamide (PA) Moulding and Extrusion Materials - Part 1: Designation-Second Edition; Corrected and Reprinted - 1992 
ISO 10123 EN-Adhesives - Determination of Shear Strength of Anaerobic Adhesives Using Pin-and-Collar Specimens First Edition 
ISO 188 EN-Rubber Vulcanized or Thermoplastic - Accelerated Ageing and Heat Resistance Tests-Fourth Edition 
ISO 294-4 CORR 1 EN-Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage TECHNICAL CORRIGENDUM 1-Second Edition 
ISO 1431-1 EN-Rubber vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing-Fourth Edition; Replaces ISO 1431-2: 1/15/1994 
ISO 5636-3 EN-Paper and Board - Determination of Air Permeance (Medium Range) - Part 3: Bendtsen Method Second Edition 
ISO 2230 EN-Rubber Products - Guidelines for Storage-Second Edition 
ISO 14782 EN-Plastics - Determination of haze for transparent materials-First edition; Technical Corrigendum 1: 04/15/2005 
ISO 9352 EN-Plastics - Determination of Resistance to Wear by Abrasive Wheels Second Edition 
ISO 1629 AMD 1 EN-Rubber and Latices - Nomenclature AMENDMENT 1-Third Edition 
ISO 4578 EN-Adhesives - Determination of Peel Resistance of High-Strength Adhesive Bonds - Floating Roller Method-Third Edition 
ISO 4593 EN-Plastics - Film and Sheeting - Determination of Thickness by Mechanical Scanning Second Edition 
ISO 1307 EN-Rubber and plastics hoses Hose sizes minimum and maximum inside diameters and tolerances on cut-to-length hoses-Fourth Edition 
ISO 6945 EN-Rubber Hoses - Determination of Abrasion Resistance of the Outer Cover-Second Edition; Amendment 1: 12/15/1998 
ISO 2528 EN-Sheet Materials - Determination of Water Vapour Transmission Rate - Gravimetric (Dish) Method-Second Edition 
ISO 1043-4 EN-Plastics - Symbols and Abbreviated Terms - Part 4: Flame Retardants-First Edition 
ISO 2411 EN-Rubber- or Plastics-Coated Fabrics - Determination of Coating Adhesion-Third Edition 
ISO 294-1 EN-Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles and moulding of multipurpose and bar test specimens-First Edition; Supersedes ISO 294: 1995; Amendment 1: 01-15 
ISO 4587 EN-Adhesives - Determination of Tensile Lap-Shear Strength of Rigid-to-Rigid Bonded Assemblies-Third Edition