ISO - Metals Collection
This collection contains documents from the following standards organization(s): International Organization for Standardization
| ISO 657-21 | EN-Hot-Rolled Steel Sections - Part 21: T-Sections with Equal Depth and Flange Width - Dimensions-First Edition | |
| ISO 657-5 | EN-Hot-Rolled Steel Sections - Part V: Equal-Leg Angles and Unequal-Leg Angles - Tolerances for Metric and Inch Series-First Edition | |
| ISO 6581 | EN-Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings-Second Edition | |
| ISO 6606 | EN-Aluminium Ores - Determination of Loss of Mass at 1 075 Degrees C - Gravimetric Method First Edition | |
| ISO 6607 | EN-Aluminium Ores - Determination of Total Silicon Content - Combined Gravimetric and Spectrophotometric Method First Edition | |
| ISO 6609 | EN-Aluminium Ores - Determination of Iron Content - Titrimetric Method First Edition | |
| ISO 6629 | EN-Chromium Ores and Concentrates - Methods of Chemical Analysis - General Instructions First Edition | |
| ISO 671 | EN-Steel and Cast Iron - Determination of Sulphur Content - Combustion Titrimetric Method-First Edition | |
| ISO 6719 | EN-Anodized Aluminium and Aluminium Alloys - Measurement of Reflectance Characteristics of Aluminium Surfaces Using Integrating-Sphere Instruments First Edition | |
| ISO 6827 | EN-Aluminium and Aluminium Alloys - Determination of Titanium Content - Diantipyrylmethane Photometric Method First Edition | |
| ISO 683-1 | EN-Heat-Treatable Steels Alloy Steels and Free-Cutting Steels - Part 1: Direct-Hardening Unalloyed and Low-Alloyed Wrought Steel in Form of Different Black Products-First Edition | |
| ISO 683-10 | EN-Heat-Treatable Steels Alloy Steels and Free-Cutting Steels - Part 10: Wrought Nitriding Steels-Second Edition | |
| ISO 683-11 | EN-Heat-Treatable Steels Alloy Steels and Free-Cutting Steels - Part 11: Wrought Case-Hardening Steels-First Edition | |
| ISO 683-14 | EN-Heat-treatable steels alloy steels and free-cutting steels Part 14: Hot-rolled steels for quenched and tempered springs-Third Edition | |
| ISO 683-15 | EN-Heat-Treatable Steels Alloy Steels and Free-Cutting Steels - Part 15: Valve Steels for Internal Combustion Engines-Second Edition | |
| ISO 683-17 | EN-Heat-Treated Steels Alloy Steels and Free-Cutting Steels - Part 17: Ball and Roller Bearing Steels-Second Edition | |
| ISO 683-18 | EN-Heat-Treatable Steels Alloy Steels and Free-Cutting Steels - Part 18: Bright Products of Unalloyed and Low Alloy Steels-Second Edition | |
| ISO 683-9 | EN-Heat-Treatable Steels Alloy Steels and Free-Cutting Steels - Part 9: Wrought Free-Cutting Steels-First Edition | |
| ISO 6830 | EN-Iron Ores - Determination of Aluminium Content - EDTA Titrimetric Method First Edition | |
| ISO 6892-1 | EN-Metallic materials - Tensile testing - Part 1: Method of test at room temperature-First Edition | |
| ISO 6929 | EN-Steel Products - Definitions and Classification First Edition | |
| ISO 6930-1 | EN-High Yield Strength Steel Plates and Wide Flats for Cold Forming - Part 1: Delivery Conditions for Thermomechanically-Rolled Steels-First Edition; Together with ISO 6930-2 Cancels and Replaces ISO 6930: 1983 | |
| ISO 6930-2 | EN-High Yield Strength Steel Plates and Wide Flats for Cold Forming - Part 2: Delivery Condition for Normalized Normalized Rolled and as-rolled Steels-First Edition | |
| ISO 6931-1 | EN-Stainless Steels for Springs - Part 1: Wire Second Edition | |
| ISO 6931-2 | EN-Stainless steels for springs Part 2: Narrow strip-Second Edition | |
| ISO 6932 | EN-Cold-reduced carbon steel strip with a maximum carbon content of 025 %-Third Edition | |
| ISO 6933 | EN-Railway Rolling Stock Material - Magnetic Particle Acceptance Testing First Edition | |
| ISO 6934-1 | EN-Steel for the Prestressing of Concrete - Part 1: General Requirements First Edition | |
| ISO 6934-2 | EN-Steel for the Prestressing of Concrete - Part 2: Cold-Drawn Wire First Edition | |
| ISO 6934-3 | EN-Steel for the Prestressing of Concrete - Part 3: Quenched and Tempered Wire First Edition | |
| ISO 6934-4 | EN-Steel for the Prestressing of Concrete - Part 4: Strand-First Edition; Corrigendum 1: 1992; Corrigendum 2: 2000 | |
| ISO 6934-5 | EN-Steel for the Prestressing of Concrete - Part 5: Hot-Rolled Steel Bars with or without Subsequent Processing First Edition | |
| ISO 6935-1 | EN-Steel for the reinforcement of concrete - Part 1: Plain bars-Second Edition | |
| ISO 6935-2 | EN-Steel for the reinforcement of concrete - Part 2: Ribbed bars-Second Edition | |
| ISO 6935-3 | EN-Steel for the Reinforcement of Concrete - Part 3: Welded Fabric First Edition-Corrigendum 1: 2000 | |
| ISO 6957 | EN-Copper Alloys - Ammonia Test for Stress Corrosion Resistance First Edition | |
| ISO 6994 | EN-Aluminium Ores - Determination of Aluminium Content - EDTA Titrimetric Method First Edition | |
| ISO 6995 | EN-Aluminium Ores - Determination of Titanium Content - 44´-Diantipyrylmethane Spectrophotometric Method First Edition | |
| ISO 7087 | EN-Ferroalloys - Experimental Methods for the Evaluation of the Quality Variation and Methods for Checking the Precision of Sampling First Edition | |
| ISO 714 | EN-Zinc - Determination of Iron Content - Photometric Method-First Edition | |
| ISO 7156 | EN-Refined Nickel - Sampling First Edition | |
| ISO 7215 | EN-Iron ores for blast furnace feedstocks - Determination of the reducibility by the final degree of reduction index-Third Edition | |
| ISO 7266 | EN-Copper and Copper Alloys - Determination of Sulfur Content - Combustion Titrimetric Method First Edition | |
| ISO 7271 | EN-Aluminium and Aluminium Alloys - Foil and Thin Strip - Dimensional Tolerances First Edition | |
| ISO 7274 | EN-Wrought Aluminium and Aluminium Alloys - Drawn Round Bars - Tolerances on Shape and Dimensions (All Minus Tolerances on Diameter) First Edition | |
| ISO 7335 | EN-Iron Ores - Determination of Combined Water Content - Karl Fischer Titrimetric Method First Edition | |
| ISO 7347 | EN-Ferroalloys - Experimental Methods for Checking the Bias of Sampling and Sample Preparation First Edition | |
| ISO 7373 | EN-Ferroalloys - Experimental Methods for Checking the Precision of Sample Division First Edition; (Corrected and Reprinted - 1988) | |
| ISO 7384 | EN-Corrosion Tests in Artificial Atmosphere - General Requirements First Edition; (CEN EN ISO 7384: 1995) | |
| ISO 7438 | EN-Metallic materials - Bend test-Second Edition | |
| ISO 7441 | EN-Corrosion of Metals and Alloys - Determination of Bimetallic Corrosion in Outdoor Exposure Corrosion Tests First Edition; (CEN EN ISO 7441: 1995) | |
| ISO 7452 | EN-Hot-Rolled Structural Steel Plates - Tolerances on Dimensions and Shape-Second Edition | |
| ISO 7500-1 | EN-Metallic Materials - Verification of Static Uniaxial Testing Machines - Part 1: Tension/Compression Testing Machines - Verification and Calibration of the Force-Measuring System-Third Edition | |
| ISO 7500-1 CORR 1 | EN-Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system TECHNICAL CORRIGENDUM 1 | |
| ISO 7500-2 | EN-Metallic materials Verification of static uniaxial testing machines Part 2: Tension creep testing machines Verification of the applied force-Second Edition | |
| ISO 752 | EN-Zinc ingots-Second Edition | |
| ISO 752 CORR 1 | EN-Zinc ingots TECHNICAL CORRIGENDUM 1-Second Edition | |
| ISO 7520 | EN-Ferronickel - Determination of Cobalt Content - Flame Atomic Absorption Spectrometric Method First Edition | |
| ISO 7523 | EN-Nickel - Determination of Silver Arsenic Bismuth Cadmium Lead Antimony Selenium Tin Tellurium and Thallium Contents - Electrothermal Atomic Absorption Spectrometric Method First Edition | |
| ISO 7524 | EN-Nickel Ferronickel and Nickel Alloys - Determination of Carbon Content - Infra-Red Absorption Method After Induction Furnace Combustion First Edition | |
| ISO 7525 | EN-Nickel - Determination of Sulfur Content - Methylene Blue Molecular Absorption Spectrometric Method After Generation of Hydrogen Sulfide First Edition | |
| ISO 7526 | EN-Nickel Ferronickel and Nickel Alloys - Determination of Sulfur Content - Infra-Red Absorption Method After Induction Furnace Combustion First Edition | |
| ISO 7527 | EN-Nickel Ferronickel and Nickel Alloys - Determination of Sulfur Content - Iodimetric Titration Method After Induction Furnace Combustion First Edition | |
| ISO 7528 | EN-Nickel Alloys - Determination of Iron Content - Titrimetric Method with Potassium Dichromate First Edition | |
| ISO 7529 | EN-Nickel Alloys - Determination of Chromium Content - Potentiometric Titration Method with Ammonium Iron(II) Sulfate First Edition | |
| ISO 7530-1 | EN-Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 1: General Requirements and Sample Dissolution First Edition; (Corrected and Reprinted - 1992) | |
| ISO 7530-2 | EN-Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 2: Determination of Cobalt Content First Edition | |
| ISO 7530-3 | EN-Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 3: Determination of Chromium Content First Edition | |
| ISO 7530-4 | EN-Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 4: Determination of Copper Content First Edition | |
| ISO 7530-5 | EN-Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 5: Determination of Iron Content First Edition | |
| ISO 7530-6 | EN-Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 6: Determination of Manganese Content First Edition | |
| ISO 7530-7 | EN-Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 7: Determination of Aluminium Content First Edition | |
| ISO 7530-8 | EN-Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 8: Determination of Silicon Content First Edition | |
| ISO 7530-9 | EN-Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Part 9: Determination of Vanadium Content First Edition | |
| ISO 7539-1 | EN-Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 1: General Guidance on Testing Procedures First Edition; (CEN EN ISO 7539-1: 1995) | |
| ISO 7539-2 | EN-Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 2: Preparation and Use of Bent-Beam Specimens First Edition; (CEN EN ISO 7539-2: 1995) | |
| ISO 7539-3 | EN-Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 3: Preparation and Use of U-Bend Specimens First Edition; (CEN EN ISO 7539-3: 1995) | |
| ISO 7539-4 | EN-Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 4: Preparation and Use of Uniaxially Loaded Tension Specimens First Edition; (CEN EN ISO 7539-4: 1995) | |
| ISO 7539-5 | EN-Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 5: Preparation and Use of C-Ring Specimens First Edition; (CEN EN ISO 7539-5: 1995) |