Print Page Email Page Smaller Text Larger Text

ISO - Metals Collection

This collection contains documents from the following standards organization(s): International Organization for Standardization

Most Popular Standards from the ISO - Metals Collection

ISO 12094 EN-Welded Steel Tubes for Pressure Purposes - Ultrasonic Testing for the Detection of Laminar Imperfections in Strips/Plates Used in the Manufacture of Welded Tubes First Edition 
ISO 4967 EN-Steel - Determination of Content of Non-Metallic Inclusions - Micrographic Method Using Standard Diagrams-Second Edition 
ISO 6208 EN-Nickel and Nickel Alloy Plate Sheet and Strip First Edition 
ISO 9227 EN-Corrosion Tests in Artificial Atmospheres - Salt Spray Tests-Second Edition; Replaces ISO 7253:1996 
ISO 10049 EN-Aluminium Alloy Castings - Visual Method for Assessing the Porosity First Edition 
ISO 1143 EN-Metals - Rotating Bar Bending Fatigue Testing-First Edition 
ISO 185 EN-Grey Cast Iron - Classification-Second Edition 
ISO 4968 EN-Steel - Macrographic Examination by Sulphur Print (Baumann Method) First Edition 
ISO 630-2 EN-Structural Steels - Part 2: Technical Delivery Requirements for Hot-Finished Hollow Sections-First Edition 
ISO 14577-1 EN-Metallic Materials - Instrumented Indentation Test for Hardness and Materials Parameters - Part 1: Test Methods-First Edition 
ISO 3522 EN-Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties-Fourth Edition 
ISO 6935-1 EN-Steel for the reinforcement of concrete - Part 1: Plain bars-Second Edition 
ISO 657-14 EN-Hot-Rolled Steel Sections - Part 14: Hot-Finished Structural Hollow Sections - Dimensions and Sectional Properties-Third Edition 
ISO 4990 EN-Steel Castings - General Technical Delivery Requirements-Second Edition 
ISO 12106 EN-Metallic Materials - Fatigue Testing - Axial-Strain-Controlled Method-First Edition 
ISO 4957 EN-Tool Steels-Second Edition 
ISO 4689 EN-Iron Ores - Determination of Sulfur Content - Barium Sulfate Gravimetric Method First Edition 
ISO 683-9 EN-Heat-Treatable Steels Alloy Steels and Free-Cutting Steels - Part 9: Wrought Free-Cutting Steels-First Edition 
ISO 8565 EN-Metals and Alloys - Atmospheric Corrosion Testing - General Requirements for Field Tests First Edition 
ISO 7215 EN-Iron ores for blast furnace feedstocks - Determination of the reducibility by the final degree of reduction index-Third Edition 
ISO 7722 EN-Aluminium Alloy Castings Produced by Gravity Sand or Chill Casting or by Related Processes - General Conditions for Inspection and Delivery First Edition 
ISO 10474 EN-Steel and Steel Products - Inspection Documents First Edition; (Corrected and Reprinted - 1992) 
ISO 9223 EN-Corrosion of Metals and Alloys - Corrosivity of Atmospheres - Classification First Edition 
ISO 683-17 EN-Heat-Treated Steels Alloy Steels and Free-Cutting Steels - Part 17: Ball and Roller Bearing Steels-Second Edition 
ISO 6507-1 EN-Metallic materials Vickers hardness test Part 1: Test method-Third Edition 
ISO 6935-2 EN-Steel for the reinforcement of concrete - Part 2: Ribbed bars-Second Edition 
ISO 2639 EN-Steel - Determination and Verification of the Depth of Carburized and Hardened Cases-Third Edition 
ISO 4954 EN-Steels for Cold Heading and Cold Extruding Second Edition 
ISO 3575 EN-Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities-Third Edition 
ISO 404 EN-Steel and Steel Products - General Technical Delivery Requirements-Second Edition 
ISO 683-1 EN-Heat-Treatable Steels Alloy Steels and Free-Cutting Steels - Part 1: Direct-Hardening Unalloyed and Low-Alloyed Wrought Steel in Form of Different Black Products-First Edition 
ISO 1035-1 EN-Hot-Rolled Steel Bars - Part 1: Dimensions of Round Bars-First Edition 
ISO 8044 EN-Corrosion of Metals and Alloys - Basic Terms and Definitions-Third Edition 
ISO 10124 EN-Seamless and Welded (Except Submerged Arc-Welded) Steel Tubes for Pressure Purposes - Ultrasonic Testing for the Detection of Laminar Imperfections First Edition 
ISO 1083 EN-Spheroidal graphite cast irons Classification-Third Edition 
ISO 11474 EN-Corrosion of Metals and Alloys - Corrosion Tests in Artificial Atmosphere - Accelerated Outdoor Test by Intermittent Spraying of a Salt Solution (Scab Test)-First Edition 
ISO 642 EN-Steel - Hardenability Test by End Quenching (Jominy Test)-Second Edition 
ISO 1099 EN-Metallic materials Fatigue testing Axial force-controlled method-Second Edition 
ISO 7668 EN-Anodized Aluminium and Aluminium Alloys - Measurement of Specular Reflectance and Specular Gloss at Angles of 20 Degrees 45 Degrees 60 Degrees or 85 Degrees First Edition 
ISO 4948-1 EN-Steels - Classification - Part 1: Classification of Steels into Unalloyed and Alloy Steels Based on Chemical Composition First Edition 
ISO 16112 EN-Compacted (vermicular) graphite cast irons Classification-First Edition 
ISO 5000 EN-Continuous hot-dip aluminium-siliconcoated cold-reduced carbon steel sheet of commercial and drawing qualities-Third Edition 
ISO 3755 EN-Cast Carbon Steels for General Engineering Purposes Second Edition 
ISO 4505 EN-Hardmetals - Metallographic Determination of Porosity and Uncombined Carbon First Edition; (CEN EN 24505: 1993) 
ISO 5755 EN-Sintered Metal Materials - Specifications-Second Edition 
ISO 14556 EN-Steel - Charpy V-Notch Pendulum Impact Test - Instrumented Test Method-First Edition; Amendment 1: 07/01/2006 
ISO 6957 EN-Copper Alloys - Ammonia Test for Stress Corrosion Resistance First Edition 
ISO 657-18 EN-Hot-Rolled Steel Sections - Part 18: L Sections for Shipbuilding (Metric Series) - Dimensions Sectional Properties and Tolerances-First Edition 
ISO 1052 EN-Steels for General Engineering Purposes-First Edition; Corrected and Reprinted - 1983 
ISO 6931-1 EN-Stainless Steels for Springs - Part 1: Wire Second Edition