ISO - Mechanical Collection
This collection contains documents from the following standards organization(s): International Organization for Standardization
| ISO 3968 | EN-Hydraulic Fluid Power - Filters - Evaluation of Differential Pressure Versus Flow Characteristics-Second Edition; Technical Corrigendum 1: 9/01/2002; Supersedes (NFPA) B93.80M | |
| ISO 4014 | EN-Hexagon Head Bolts - Product Grades A and B-Third Edition | |
| ISO 4015 | EN-Hexagon Head Bolts - Product Grade B - Reduced Shank (Shank Diameter is Approximately Equal to Pitch Diameter) First Edition | |
| ISO 4016 | EN-Hexagon Head Bolts - Product Grade C-Third Edition | |
| ISO 4017 | EN-Hexagon Head Screws - Product Grades A and B-Third Edition | |
| ISO 4018 | EN-Hexagon Head Screws - Product Grade C-Third Edition | |
| ISO 4019 | EN-Structural Steels - Cold-Formed Welded Structural Hollow Sections - Dimensions and Sectional Properties-Second Edition | |
| ISO 4021 | EN-Hydraulic Fluid Power - Particulate Contamination Analysis - Extraction of Fluid Samples from Lines of an Operating System Second Edition | |
| ISO 4026 | EN-Hexagon socket set screws with flat point-Third Edition | |
| ISO 4027 | EN-Hexagon Socket Set Screws with Cone Point-Third Edition | |
| ISO 4028 | EN-Hexagon Socket Set Screws with Dog Point-Third Edition | |
| ISO 4029 | EN-Hexagon socket set screws with cup point-Third Edition | |
| ISO 4032 | EN-Hexagon Nuts Style 1 - Product Grades A and B-Third Edition; Corrected and Reprinted: 03/01/2001 | |
| ISO 4033 | EN-Hexagon Nuts Style 2 - Product Grades A and B-Second Edition | |
| ISO 4034 | EN-Hexagon Nuts - Product Grade C-Third Edition | |
| ISO 4035 | EN-Hexagon Thin Nuts (Chamfered) - Product Grades A and B-Third Edition | |
| ISO 4036 | EN-Hexagon Thin Nuts (Unchamfered) - Product Grade B-Second Edition; Corrected and Reprinted 12-1-2000 | |
| ISO 4042 | EN-Fasteners - Electroplated Coatings-Second Edition | |
| ISO 4059 | EN-Polyethylene (PE) Pipes - Pressure Drop in Mechanical Pipe-Jointing Systems - Method of Test and Requirements First Edition | |
| ISO 4065 | EN-Thermoplastic Pipes - Universal Wall Thickness Table-Second Edition | |
| ISO 4101 | EN-Drawn Steel Wire for Elevator Ropes - Specifications First Edition | |
| ISO 4132 | EN-Unplasticized Polyvinyl Chloride (PVC) and Metal Adaptor Fittings for Pipes Under Pressure - Laying Lengths and Size of Threads - Metric Series First Edition | |
| ISO 4144 | EN-Pipework - Stainless Steel Fittings Threaded in Accordance with ISO 7-1-Second Edition | |
| ISO 4145 | EN-Non-Alloy Steel Fittings Threaded to ISO 7/1 Second Edition | |
| ISO 4161 | EN-Hexagon Nuts with Flange - Coarse Thread-Second Edition | |
| ISO 4162 | EN-Hexagon Flange Bolts - Small Series First Edition | |
| ISO 4179 | EN-Ductile iron pipes and fittings for pressure and non-pressure pipelines Cement mortar lining-Third Edition | |
| ISO 4200 | EN-Plain End Steel Tubes Welded and Seamless - General Tables of Dimensions and Masses per Unit Length-Fourth Edition; Replaces ISO 134: 1973 and ISO 336: 1976 | |
| ISO 4344 | EN-Steel wire ropes for lifts Minimum requirements-Second Edition | |
| ISO 4345 | EN-Steel Wire Ropes - Fibre Main Cores - Specification Second Edition | |
| ISO 4346 | EN-Steel Wire Ropes for General Purposes - Lubricants - Basic Requirements First Edition | |
| ISO 4378-1 | EN-Plain bearings - Terms definitions classification and symbols - Part 1: Design bearing materials and their properties-Third edition | |
| ISO 4378-2 | EN-Plain bearings - Terms definitions classification and symbols - Part 2: Friction and wear-Second Edition | |
| ISO 4378-3 | EN-Plain bearings - Terms definitions classification and symbols - Part 3: Lubrication-Second Edition | |
| ISO 4378-4 | EN-Plain bearings - Terms definitions classification and symbols - Part 4: Basic symbols-Second Edition | |
| ISO 4378-5 | EN-Plain bearings - Terms definitions classification and symbols - Part 5: Application of symbols-First Edition | |
| ISO 4379 | EN-Plain Bearings - Copper Alloy Bushes Second Edition (Corrected and Reprinted - 1995) | |
| ISO 4381 | EN-Plain Bearings - Lead and Tin Casting Alloys for Multilayer Plain Bearings-Third Edition | |
| ISO 4382-1 | EN-Plain Bearings - Copper Alloys - Part 1: Cast Copper Alloys for Solid and Multilayer Thick- Walled Plain Bearings Second Edition | |
| ISO 4382-2 | EN-Plain Bearings - Copper Alloys - Part 2: Wrought Copper Alloys for Solid Plain Bearings Second Edition | |
| ISO 4383 | EN-Plain Bearings - Multilayer Materials for Thin-Walled Plain Bearings-Third Edition | |
| ISO 4384-1 | EN-Plain Bearings - Hardness Testing of Bearing Metals - Part 1: Compound Materials-Second Edition | |
| ISO 4384-2 | EN-Plain Bearings - Hardness Testing of Bearing Metals - Part 2: Solid Materials First Edition | |
| ISO 4385 | EN-Plain Bearings - Compression Testing of Metallic Bearing Materials First Edition | |
| ISO 4386-1 | EN-Plain Bearings - Metallic Multilayer Plain Bearings - Part 1: Non-Destructive Ultrasonic Testing of Bond Second Edition | |
| ISO 4386-2 | EN-Plain Bearings - Metallic Multilayer Plain Bearings - Part 2: Destructive Testing of Bond for Bearing Metal Layer Thicknesses Greater Than or Equal to 2 mm First Edition | |
| ISO 4386-3 | EN-Plain Bearings - Metallic Multilayer Plain Bearings - Part 3: Non-Destructive Penetrant Testing First Edition | |
| ISO 4391 | EN-Hydraulic Fluid Power - Pumps Motors and Integral Transmissions - Parameter Definitions and Letter Symbols Second Edition | |
| ISO 4392-1 | EN-Hydraulic Fluid Power - Determination of Characteristics of Motors - Part 1: At Constant Low Speed and at Constant Pressure-Third Edition | |
| ISO 4392-2 | EN-Hydraulic Fluid Power - Determination of Characteristics of Motors - Part 2: Startability-Third Edition | |
| ISO 4392-3 | EN-Hydraulic Fluid Power - Determination of Characteristics of Motors - Part 3: At Constant Flow and at Constant Torque First Edition | |
| ISO 4393 | EN-Fluid Power Systems and Components - Cylinders - Basic Series of Piston Strokes First Edition | |
| ISO 4394-1 | EN-Fluid Power Systems and Components - Cylinder Barrels - Part 1: Requirements for Steel Tubes with Specially Finished Bores First Edition | |
| ISO 4395 | EN-Fluid power systems and components - Cylinder piston rod end types and dimensions-Second Edition | |
| ISO 4395 CORR 1 | EN-Fluid power systems and components - Cylinder piston rod end types and dimensions TECHNICAL CORRIGENDUM 1-Second Edition | |
| ISO 4397 | EN-Fluid Power Systems and Components - Connectors and Associated Components - Nominal Outside Diameters of Tubes and Nominal Inside Diameters of Hoses Second Edition | |
| ISO 4399 | EN-Fluid Power Systems and Components - Connectors and Associated Components - Nominal Pressures Second Edition | |
| ISO 4400 | EN-Fluid Power Systems and Components - Three-Pin Electrical Plug Connectors with Earth Contact - Characteristics and Requirements Third Edition | |
| ISO 4401 | EN-Hydraulic fluid power - Four-port directional control valves - Mounting surfaces-Third Edition | |
| ISO 4405 | EN-Hydraulic Fluid Power - Fluid Contamination - Determination of Particulate Contamination by the Gravimetric Method First Edition-Supersedes (NFPA) T2.9.14 | |
| ISO 4406 | EN-Hydraulic Fluid Power - Fluids - Method for Coding the Level of Contamination by Solid Particles-Second Edition | |
| ISO 4407 | EN-Hydraulic Fluid Power - Fluid Contamination - Determination of Particulate Contamination by the Counting Method Using an Optical Microscope-Second Edition | |
| ISO 4409 | EN-Hydraulic fluid power - Positive-displacement pumps motors and integral transmissions - Methods of testing and presenting basic steady state performance-Second Edition | |
| ISO 4411 | EN-Hydraulic fluid power - Valves - Determination of pressure differential/flow characteristics-Second Edition | |
| ISO 4412-1 | EN-Hydraulic Fluid Power - Test Code for Determination of Airborne Noise Levels - Part 1: Pumps Second Edition-Supersedes (NFPA) B93.71M | |
| ISO 4412-2 | EN-Hydraulic Fluid Power - Test Code for Determination of Airborne Noise Levels - Part 2: Motors Second Edition | |
| ISO 4412-3 | EN-Hydraulic Fluid Power - Test Code for Determination of Airborne Noise Levels - Part 3: Pumps - Method Using a Parallelepiped Microphone Array First Edition | |
| ISO 4413 | EN-Hydraulic Fluid Power - General Rules Relating to Systems-Second Edition | |
| ISO 4414 | EN-Pneumatic Fluid Power - General Rules Relating to Systems-Second Edition | |
| ISO 4427-1 | EN-Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 1: General-First Edition | |
| ISO 4427-1 CORR 1 | EN-Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 1: General TECHNICAL CORRIGENDUM 1-First Edition | |
| ISO 4427-2 | EN-Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 2: Pipes-First Edition | |
| ISO 4427-3 | EN-Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 3: Fittings-First Edition | |
| ISO 4427-5 | EN-Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 5: Fitness for purpose of the system-First Edition | |
| ISO 4433-1 | EN-Thermoplastics Pipes - Resistance to Liquid Chemicals - Classification - Part 1: Immersion Test Method-First Edition; Replaces ISO 4433 | |
| ISO 4433-2 | EN-Thermoplastics Pipes - Resistance to Liquid Chemicals - Classification - Part 2: Polyolefin Pipes-First Edition; Replaces ISO 4433 | |
| ISO 4433-3 | EN-Thermoplastics Pipes - Resistance to Liquid Chemicals - Classification - Part 3: Unplasticized Poly(Vinyl Chloride) (PVC-U) High-Impact Poly(Vinyl Chloride) (PVC-HI) and Chlorinated Poly(Vinyl Chloride) (PVC-C) Pipe | |
| ISO 4433-4 | EN-Thermoplastics Pipes - Resistance to Liquid Chemicals - Classification - Part 4: Poly(Vinylidene Fluoride) (PVDF) Pipes-First Edition; Replaces ISO 4433 | |
| ISO 4435 | EN-Plastics piping systems for non-pressure underground drainage and sewerage Unplasticized poly(vinyl chloride) (PVC-U)-Secon Edition |