ISO - Standards (Active) Collection
This collection contains documents from the following standards organization(s): International Organization for Standardization
| ISO 16110-1 | EN-Hydrogen generators using fuel processing technologies - Part 1: Safety-First Edition | |
| ISO 16110-2 | EN-Hydrogen generators using fuel processing technologies - Part 2: Test methods for performance-First Edition | |
| ISO 16111 | EN-Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride-First Edition | |
| ISO 16112 | EN-Compacted (vermicular) graphite cast irons Classification-First Edition | |
| ISO 16120-1 | EN-Non-alloy steel wire rod for conversion to wire Part 1: General requirements-First Edition | |
| ISO 16120-2 | EN-Non-alloy steel wire rod for conversion to wire Part 2: Specific requirements for general purpose wire rod-First Edition | |
| ISO 16120-3 | EN-Non-alloy steel wire rod for conversion to wire Part 3: Specific requirements for rimmed and rimmed-substitute low-carbon steel wire rod-First Edition | |
| ISO 16120-4 | EN-Non-alloy steel wire rod for conversion to wire Part 4: Specific requirements for wire rod for special applications-First Edition | |
| ISO 16121-1 | EN-Road vehicles - Ergonomic requirements for the driver´s workplace in line-service buses - Part 1: General description basic requirements-First Edition | |
| ISO 16121-2 | EN-Road vehicles - Ergonomic requirements for the driver´s workplace in line-service buses - Part 2: Visibility-First Edition | |
| ISO 16121-3 | EN-Road vehicles Ergonomic requirements for the driver´s workplace in line-service buses Part 3: Information devices and controls-First Edition | |
| ISO 16121-4 | EN-Road vehicles Ergonomic requirements for the driver´s workplace in line-service buses Part 4: Cabin environment-First Edition | |
| ISO 16124 | EN-Steel wire rod Dimensions and tolerances-First Edition; Replaces ISO 8457-1: 1989 | |
| ISO 16132 | EN-Ductile iron pipes and fittings Seal coats for cement mortar linings-First Edition | |
| ISO 16133 | EN-Soil quality Guidance on the establishment and maintenance of monitoring programmes-First Edition | |
| ISO 16135 | EN-Industrial valves - Ball valves of thermoplastics materials-First Edition | |
| ISO 16136 | EN-Industrial valves Butterfly valves of thermoplastics materials-First Edition | |
| ISO 16137 | EN-Industrial valves Check valves of thermoplastics materials-First Edition | |
| ISO 16138 | EN-Industrial valves Diaphragm valves of thermoplastics materials-First Edition | |
| ISO 16139 | EN-Industrial valves Gate valves of thermoplastics materials-First Edition | |
| ISO 16140 | EN-Microbiology of food and animal feeding stuffs Protocol for the validation of alternative methods-First Edition | |
| ISO 16143-1 | EN-Stainless steels for general purposes Part 1: Flat products-First Edition | |
| ISO 16143-2 | EN-Stainless steels for general purposes Part 2: Semi-finished products bars rods and sections-First Edition | |
| ISO 16143-3 | EN-Stainless steels for general purposes Part 3: Wire-First edition | |
| ISO 16147 | EN-Small Craft - Inboard Diesel Engines - Engine-Mounted Fuel and Electrical Components-First Edition | |
| ISO 16148 | EN-Gas cylinders Refillable seamless steel gas cylinders Acoustic emission testing (AT) for periodic inspection-First Edition | |
| ISO 16149 | EN-Agricultural irrigation equipment PVC above-ground low-pressure pipe for surface irrigation Specifications and test methods-First Edition | |
| ISO 16151 | EN-Corrosion of metals and alloys Accelerated cyclic tests with exposure to acidified salt spray dry and wet conditions-First Edition | |
| ISO 16152 | EN-Plastics - Determination of xylenesoluble matter in polypropylene-First Edition; Replaces ISO 6427 | |
| ISO 16154 | EN-Tractors and machinery for agriculture and forestry Installation of lighting light signalling and marking devices for travel on public roadways-First Edition | |
| ISO 16155 | EN-Ships and marine technology Computer applications Shipboard loading instruments-First Edition | |
| ISO 16156 | EN-Machine-tools safety Safety requirements for the design and construction of work holding chucks-First Edition | |
| ISO 16160 | EN-Continuously hot-rolled steel sheet products Dimensional and shape tolerances-Second Edition | |
| ISO 16162 | EN-Continuously cold-rolled steel sheet products Dimensional and shape tolerances-Second Edition | |
| ISO 16163 | EN-Continuously hot-dipped coated steel sheet products Dimensional and shape tolerances-Second Edition | |
| ISO 16165 | EN-Ships and Marine Technology - Marine Environment Protection - Terminology Relating to Oil Spill Response-First Edition | |
| ISO 1617 | EN-Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Sodium Content - Flame Emission Spectrophotometric Method-First Edition | |
| ISO 16172 | EN-Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe-First Edition | |
| ISO 1618 | EN-Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Vanadium Content - N-Benzoyl-N-Phenylhydroxylamine Photometric Method-First Edition | |
| ISO 16183 | EN-Heavy-duty engines Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions-First Edition | |
| ISO 16185 | EN-Road Vehicles - Engine Families for Certification of Heavy-Duty Vehicles - Exhaust Emissions-First Edition | |
| ISO 1619 | EN-Cryolite Natural and Artificial - Preparation and Storage of Test Samples-First Edition | |
| ISO 16192 | EN-Space systems - Experience gained in space projects (Lessons learned) - Principles and guidelines-First Edition | |
| ISO 162 | EN-Cinematography - Head Gaps and Sound Records for Three- Four- or Six-Track Magnetic Sound Records on 35 mm and Single-Track on 175 mm Motion-Picture Film Containing No Picture - Positions and Width Dimensions-Seco | |
| ISO 1620 | EN-Cryolite Natural and Artificial - Determination of Silica Content - Reduced Molybdosilicate Spectrophotometric Method-First Edition | |
| ISO 16200-1 | EN-Workplace air quality Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography Part 1: Pumped sampling method-First Edition | |
| ISO 16200-2 | EN-Workplace Air Quality - Sampling and Analysis of Voltage Organic Compounds by Solvent Desorption/Gas Chromatography - Part 2: Diffusive Sampling Method-First Edition | |
| ISO 16201 | EN-Technical aids for persons with disability Environmental control systems for daily living-First Edition | |
| ISO 16212 | EN-Cosmetics - Microbiology - Enumeration of yeast and mould-First Edition | |
| ISO 1622-1 | EN-Plastics - Polystyrene (PS) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications-Second Edition | |
| ISO 1622-2 | EN-Plastics - Polystyrene (PS) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties-Second Edition | |
| ISO 16220 | EN-Magnesium and magnesium alloys Magnesium alloy ingots and castings-Second Edition | |
| ISO 16220 AMD 1 | EN-Magnesium and magnesium alloys - Magnesium alloy ingots and castings AMENDMENT 1: Additional alloys-Second Edition | |
| ISO 16221 | EN-Water Quality - Guidance for Determination of Biodegradability in the Marine Environment-First Edition | |
| ISO 16232-1 | EN-Road vehicles - Cleanliness of components of fluid circuits - Part 1: Vocabulary-First Edition | |
| ISO 16232-10 | EN-Road vehicles - Cleanliness of components of fluid circuits - Part 10: Expression of results-First Edition | |
| ISO 16232-2 | EN-Road vehicles - Cleanliness of components of fluid circuits - Part 2: Method of extraction of contaminants by agitation-First Edition | |
| ISO 16232-3 | EN-Road vehicles - Cleanliness of components of fluid circuits - Part 3: Method of extraction of contaminants by pressure rinsing-First Edition | |
| ISO 16232-4 | EN-Road vehicles - Cleanliness of components of fluid circuits - Part 4: Method of extraction of contaminants by ultrasonic techniques-First Edition | |
| ISO 16232-5 | EN-Road vehicles - Cleanliness of components of fluid circuits - Part 5: Method of extraction of contaminants on functional test bench-First Edition | |
| ISO 16232-6 | EN-Road vehicles - anliness of components of fluid circuits - t 6: Particle mass determination by gravimetric analysis-FIRST EDITION | |
| ISO 16232-7 | EN-Road vehicles - Cleanliness of components of fluid circuits - Part 7: Particle sizing and counting by microscopic analysis-FIRST EDITION | |
| ISO 16232-8 | EN-Road vehicles - Cleanliness of components of fluid circuits - Part 8: Particle nature determination by microscopic analysis-FIRST EDITION | |
| ISO 16232-9 | EN-Road vehicles - Cleanliness of components of fluid circuits - Part 9: Particle sizing and counting by automatic light extinction particle counter-FIRST EDITION | |
| ISO 16234 | EN-Heavy commercial vehicles and buses Straight-ahead braking on surfaces with split coefficient of friction Open-loop test method-First Edition | |
| ISO 1624 | EN-Plastics - Vinyl Chloride Homopolymer and Copolymer Resins - Sieve Analysis in Water-Second Edition | |
| ISO 16240 | EN-Water quality Determination of the genotoxicity of water and waste water Salmonella/microsome test (Ames test)-First edition | |
| ISO 16241 | EN-Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)-First Edition | |
| ISO 16245 | EN-Information and documentation - Boxes file covers and other enclosures made from cellulosic materials for storage of paper and parchment documents-First Edition | |
| ISO 16246 | EN-Road vehicles M12 x 125 spark-plugs with flat seating and 14 mm hexagon and their cylinder head housing-First Edition | |
| ISO 16247 | EN-Road vehicles Detection of exhaust system leaks Helium test method and detection device specification-First Edition | |
| ISO 16253 | EN-Watch-cases and accessories - Vapour phase deposited coatings-First Edition | |
| ISO 16262 | EN-Information Technology - ECMAScript Language Specification-Second Edition | |
| ISO 16264 | EN-Water Quality - Determination of Soluble Silicates by Flow Analysis (FIA and CFA) and Photometric Detection-First Edition | |
| ISO 16265 | EN-Water quality - Determination of the methylene blue active substances (MBAS) index - Method using continuous flow analysis (CFA)-First Edition | |
| ISO 16266 | EN-Water quality Detection and enumeration of Pseudomonas aeruginosa Method by membrane filtration-First Edition | |
| ISO 16269-6 | EN-Statistical interpretation of data Part 6: Determination of statistical tolerance intervals-First edition; Cancels and Replaces ISO 3207:1975 | |
| ISO 16269-7 | EN-Statistical Interpretation of Data - Part 7: Median - Estimation and Confidence Intervals-First Edition | |
| ISO 16269-8 | EN-Statistical interpretation of data Part 8: Determination of prediction intervals-First Edition |