ISO - Standards (Active) Collection
This collection contains documents from the following standards organization(s): International Organization for Standardization
| ISO 14044 | EN-Environmental management Life cycle assessment Requirements and guidelines-First Edition | |
| ISO 14050 | EN-Environmental management - Vocabulary-Third Edition | |
| ISO 14063 | EN-Environmental management Environmental communication Guidelines and examples-First Edition | |
| ISO 14064-1 | EN-Greenhouse gases Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals-First Edition | |
| ISO 14064-2 | EN-Greenhouse gases Part 2: Specification with guidance at the project level for quantification monitoring and reporting of greenhouse gas emission reductions or removal enhancements-First Edition | |
| ISO 14064-3 | EN-Greenhouse gases Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions-First Edition | |
| ISO 14065 | EN-Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition-First edition | |
| ISO 1407 | EN-Rubber - Determination of solvent extract-Third Edition | |
| ISO 1408 | EN-Rubber - Determination of Carbon Black Content - Pyrolytic and Chemical Degradation Methods-Third Edition | |
| ISO 1409 | EN-Plastics/rubber Polymer dispersions and rubber latices (natural and synthetic) Determination of surface tension by the ring method-Fifth Edition | |
| ISO 14096-1 | EN-Non-destructive testing Qualification of radiographic film digitisation systems Part 1: Definitions quantitative measurements of image quality parameters standard reference film and qualitative control-First Edit | |
| ISO 14096-2 | EN-Non-destructive testing Qualification of radiographic film digitisation systems Part 2: Minimum requirements-First Edition | |
| ISO 141 | EN-Textile Machinery and Accessories - Pirn Winders and Cross Winders - Definition of Left and Right Sides-First Edition | |
| ISO 14102 | EN-Information technology - Guideline for the evaluation and selection of CASE tools-Second Edition | |
| ISO 14104 | EN-Gears - Surface Temper Etch Inspection After Grinding-First Edition; Corrected and Reprinted 02-15-1997 | |
| ISO 14111 | EN-Natural Gas - Guidelines to Traceability in Analysis-First Edition | |
| ISO 14112 | EN-Gas Welding Equipment - Small Kits for Gas Brazing and Welding First Edition | |
| ISO 14113 | EN-Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)-Second Edition | |
| ISO 14114 | EN-Gas Welding Equipment - Acetylene Manifold Systems for Welding Cutting and Allied Processes - General Requirements-First Edition | |
| ISO 14116 | EN-Protective clothing - Protection against heat and flame - Limited flame spread materials material assemblies and clothing-First edition | |
| ISO 14118 | EN-Safety of Machinery - Prevention of Unexpected Start-Up | |
| ISO 14119 | EN-Safety of Machinery - Interlocking Devices Associated with Guards - Principles for Design and Selection-First Edition | |
| ISO 14119 AMD 1 | EN-Safety of Machinery - Interlocking Devices Associated with Guards - Principles for Design and Selection AMENDMENT 1: Design to minimize defeat possibilities-First Edition | |
| ISO 14120 | EN-Safety of Machinery - Guards - General Requirements for the Design and Construction of Fixed and Movable Guards-First Edition | |
| ISO 14121-1 | EN-Safety of machinery - Risk assessment - Part 1: Principles-First Edition | |
| ISO 14122-1 | EN-Safety of Machinery - Permanent Means of Access to Machinery - Part 1: Choice of Fixed Means of Access between Two Levels-First Edition | |
| ISO 14122-1 AMD 1 | EN-Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels AMENDMENT 1-First Edition | |
| ISO 14122-2 | EN-Safety of Machinery - Permanent Means of Access to Machinery - Part 2: Working Platforms and Walkways-First Edition | |
| ISO 14122-2 AMD 1 | EN-Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways AMENDMENT 1-First Edition | |
| ISO 14122-3 | EN-Safety of Machinery - Permanent Means of Access to Machinery - Part 3: Stairs Stepladders and Guard-Rails-First Edition | |
| ISO 14122-3 AMD 1 | EN-Safety of machinery - Permanent means of access to machinery - Part 3: Stairs stepladders and guard-rails AMENDMENT 1-First Edition | |
| ISO 14122-4 | EN-Safety of machinery Permanent means of access to machinery Part 4: Fixed ladders-First Edition | |
| ISO 14122-4 AMD 1 | EN-Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders AMENDMENT 1-First Edition | |
| ISO 14123-1 | EN-Safety of Machinery - Reduction of Risks to Health from Hazardous Substances Emitted by Machinery - Part 1: Principles and Specifications for Machinery Manufacturers-First Edition | |
| ISO 14123-2 | EN-Safety of Machinery - Reduction of Risks to Health from Hazardous Substances Emitted by Machinery - Part 2: Methodology Leading to Verification Procedures-First Edition | |
| ISO 14125 | EN-Fibre-Reinforced Plastic Composites - Determination of Flexural Properties-First Edition; Technical Corrigendum 1: 07/15/2001 | |
| ISO 14126 | EN-Fibre-Reinforced Plastic Composites - Determination of Compressive Properties in the In-Plane Direction-First Edition; Replaces ISO 8515: 1991; Corrigendum 1 7/15/2001 | |
| ISO 14127 | EN-Carbon-fibre-reinforced composites - Determination of the resin fibre and void contents-First Edition | |
| ISO 14129 | EN-Fibre-Reinforced Plastic Composites - Determination of the In -Plane Shear Stress/Shear Strain Response Including the In-Plane Shear Modulus and Strength by the Plus or Minus 45 Degrees Tension Test Method-First Ed | |
| ISO 1413 | EN-Horology - Shock-Resistant Watches-Second Edition | |
| ISO 14130 | EN-Fibre-Reinforced Plastic Composites - Determination of Apparent Interlaminar Shear Strength by Short-Beam Method-First Edition; Corrigendum 1: 11/1/2003 | |
| ISO 14131 | EN-Agricultural sprayers Boom steadiness Test methods-First Edition | |
| ISO 14132-1 | EN-Optics and optical instruments - Vocabulary for telescopic systems - Part 1: General terms and alphabetical indexes of terms in ISO 14132-First edition | |
| ISO 14132-2 | EN-Optics and optical instruments Vocabulary for telescopic systems Part 2: Terms for binoculars monoculars and spotting scopes-First Edition | |
| ISO 14132-2 CORR 1 | EN-Optics and optical instruments - Vocabulary for telescopic systems - Part 2: Terms for binoculars monoculars and spotting scopes TECHNICAL CORRIGENDUM 1-First Edition | |
| ISO 14132-3 | EN-Optics and optical instruments - Vocabulary for telescopic systems - Part 3: Terms for telescopic sights-First edition | |
| ISO 14132-4 | EN-Optics and optical instruments - Vocabulary for telescopic systems - Part 4: Terms for astronomical telescopes-First edition | |
| ISO 14132-5 | EN-Optics and photonics - Vocabulary for telescopic systems - Part 5: Terms for night vision devices-First Edition | |
| ISO 14133-1 | EN-Optics and optical instruments - Specifications for binoculars monoculars and spotting scopes - Part 1: General purpose instruments-First Edition | |
| ISO 14133-2 | EN-Optics and optical instruments - Specifications for binoculars monoculars and spotting scopes - Part 2: High performance instruments-First Edition | |
| ISO 14134 | EN-Optics and optical instruments Specifications for astronomical telescopes-First Edition | |
| ISO 14135-1 | EN-Optics and optical instruments Specifications for telescopic sights Part 1:General-purpose instruments-First Edition | |
| ISO 14135-2 | EN-Optics and optical instruments Specifications for telescopic sights Part 2: High-performance instruments-First Edition | |
| ISO 14136 | EN-Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Specification Functional Model and Information Flows - Identification Supplementary Servic | |
| ISO 14137 | EN-Machine Tools - Test Conditions for Wire Electrical-Discharge Machines (Wire EDM) - Terminology and Testing of the Accuracy-First Edition | |
| ISO 14139 | EN-Hydrometric Determinations - Flow Measurements in Open Channels Using Structures - Compound Gauging Structures-First Edition | |
| ISO 14143-1 | EN-Information technology - Software measurement - Functional size measurement Part 1: Definition of concepts-Second Edition | |
| ISO 14143-2 | EN-Information Technology - Software Measurement - Functional Size Measurement - Part 2: Conformity Evaluation of Software Size Measurement Methods to ISO/IEC 14143-1:1998-First Edition | |
| ISO 14145-1 | EN-Roller Ball Pens and Refills - Part 1: General Use-First Edition; Corrected and Reprinted 07/01/1999 | |
| ISO 14145-2 | EN-Roller Ball Pens and Refills - Part 2: Documentary Use (DOC)-First Edition | |
| ISO 14146 | EN-Radiation Protection - Criteria and Performance Limits for the Periodic Evaluation of Processors of Personal Dosemeters for X and Gamma Radiation-First Edition | |
| ISO 14152 | EN-Neutron Radiation Protection Shielding - Design Principles and Considerations for the Choice of Appropriate Materials-First Edition | |
| ISO 14154 | EN-Soil quality Determination of some selected hlorophenols Gas-chromatographic method with electron-capture etection-First Edition | |
| ISO 14155-2 | EN-Clinical Investigation of Medical Devices for Human Subjects - Part 2: Clinical Investigation Plans-First Edition; Together with the first edition of 14155-1 Cancels and Replaces 14155: 1996 | |
| ISO 14156 | EN-Milk and Milk Products - Extraction Methods for Lipids and Liposoluble Compounds-First Edition; IDF 172 | |
| ISO 14156 AMD 1 | EN-Milk and milk products - Extraction methods for lipids and liposoluble compounds AMENDMENT 1-First Edition | |
| ISO 14159 | EN-Safety of Machinery - Hygiene Requirements for the Design of Machinery-First Edition | |
| ISO 14160 | EN-Sterilization of Single-Use Medical Devices Incorporating Materials of Animal Origin - Validation and Routine Control of Sterilization by Liquid Sterilants-First Edition | |
| ISO 14161 | EN-Sterilization of health care products - Biological indicators - Guidance for the selection use and interpretation of results-Second Edition | |
| ISO 14163 | EN-Acoustics - Guidelines for Noise Control by Silencers-First Edition | |
| ISO 14164 | EN-Stationary Source Emissions - Determination of the Volume Flowrate of Gas Streams in Ducts - Automated Method-First Edition | |
| ISO 14165-114 | EN-Information technology Fibre Channel Part 114: 100 MB/s balanced copper physical interface (FC-100-DF-EL-S)-First Edition | |
| ISO 14165-115 | EN-Information technology - Fibre channel - Part 115: Physical interfaces (FC-PI)-First Edition | |
| ISO 14165-116 | EN-Information technology Fibre channel Part 116: 10 Gigabit Fibre Channel (10GFC)-First Edition | |
| ISO 14165-116 AMD 1 | EN-Information technology - Fibre channel - Part 116: 10 Gigabit Fibre Channel (10GFC) AMENDMENT 1-First Edition | |
| ISO 14165-122 | EN-Information technology - Fibre channel - Part 122: Arbitrated loop-2 (FC-AL-2)-First Edition | |
| ISO 14165-122 AMD 1 | EN-AMENDMENT 1 Information technology - Fibre channel - Part 122: Arbitrated loop-2 (FC-AL-2)-First Edition | |
| ISO 14165-131 | EN-Information Technology - Fibre Channel - Part 131: Switch Fabric Requirements (FC-SW)-First Edition | |
| ISO 14165-133 | EN-Information technology - Fibre channnel - Part 133: Fibre channel switch fabric-3 (FC-SW-3)-First Edition |