ISO - Chemistry/Coatings/Construction Collection
This collection contains documents from the following standards organization(s): International Organization for Standardization
| ISO 2299 | EN-Sawn Timber of Broadleaved Species - Defects - Classification-First Edition | |
| ISO 2300 | EN-Sawn Timber of Broadleaved Species - Defects - Terms and Definitions-First Edition | |
| ISO 2301 | EN-Sawn Timber of Broadleaved Species - Defects - Measurement-First Edition | |
| ISO 23045 | EN-Building environment design - Guidelines to assess energy efficiency of new buildings-First Edition | |
| ISO 23145-1 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density-First Edition | |
| ISO 23146 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) - Test methods for fracture toughness of monolithic ceramics - Single-edge V-notch beam (SEVNB) method-First Edition | |
| ISO 23202 | EN-Aluminium oxide used for the production of aluminium Determination of particles passing a 20 micrometre aperture sieve-First Edition | |
| ISO 23469 | EN-Bases for design of structures Seismic actions for designing geotechnical works-First Edition | |
| ISO 2360 | EN-Non-conductive coatings on non-magnetic electrically conductive basis materials Measurement of coating thickness Amplitude-sensitive eddy current method-Third Edition | |
| ISO 2361 | EN-Electrodeposited Nickel Coatings on Magnetic and Non-Magnetic Substrates - Measurement of Coating Thickness - Magnetic Method-Second Edition; PNS 671: 1990 | |
| ISO 2366 | EN-Cryolite Natural and Artificial - Determination of Sodium Content - Flame Emission and Atomic Absorption Spectrophotometric Methods-First Edition | |
| ISO 2367 | EN-Cryolite (Natural and Artificial) - Determination of Aluminium Content - 8-Hydroxyquinoline Gravimetric Method-First Edition | |
| ISO 23811 | EN-Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material and calculation of the theoretical spreading ra | |
| ISO 23812 | EN-Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth calibration for silicon using multiple delta-layer reference materials-First Edition | |
| ISO 23830 | EN-Surface chemical analysis - Secondary-ion mass spectrometry - Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry-First Edition | |
| ISO 2394 | EN-General Principles on Reliability for Structures-Third Edition | |
| ISO 23954 | EN-Oil of lime expressed Persian type (Citrus latifolia Tanaka)-First Edition | |
| ISO 23993 | EN-Thermal insulation products for building equipment and industrial installations - Determination of design thermal conductivity-First Edition | |
| ISO 2409 | EN-Paints and Varnishes - Cross-Cut Test-Third Edition | |
| ISO 24235 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) - Determination of particle size distribution of ceramic powders by laser diffraction method-First edition | |
| ISO 24236 | EN-Surface chemical analysis Auger electron spectroscopy Repeatability and constancy of intensity scale-First edition | |
| ISO 24237 | EN-Surface chemical analysis X-ray photoelectron spectroscopy Repeatability and constancy of intensity scale-First edition | |
| ISO 2426-1 | EN-Plywood - Classification by Surface Appearance - Part 1: General-First Edition; Supersedes ISO 2426: 1974 | |
| ISO 2426-2 | EN-Plywood - Classification by Surface Appearance - Part 2: Hardwood-First Edition | |
| ISO 2426-3 | EN-Plywood - Classification by Surface Appearance - Part 3: Softwood-First Edition; Supersedes ISO 2426: 1974 | |
| ISO 2431 | EN-Paints and Varnishes - Determination of Flow Time by Use of Flow Cups-Fourth Edition; Technical Corrigendum 1: 06-15-1994; Technical Corrigendum 2: 04-01-1999 | |
| ISO 24353 | EN-Hygrothermal performance of building materials and products - Determination of moisture adsorption/desorption properties in response to humidity variation-First Edition | |
| ISO 24369 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) - Determination of content of coarse particles in ceramic powders by wet sieving method-First Edition | |
| ISO 24370 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method-First edition | |
| ISO 2444 | EN-Joints in Building - Vocabulary-Second Edition | |
| ISO 2445 | EN-Joints in Building - Fundamental Principles for Design-First Edition | |
| ISO 24450 | EN-Laboratory glassware Wide-necked boiling flasks-First Edition | |
| ISO 2456 | EN-Surface Active Agents - Water Used as a Solvent for Tests - Specification and Test Methods-First Edition | |
| ISO 2457 | EN-Solid Wood Parquet - Classification of Beech Strips-Second Edition | |
| ISO 2460 | EN-Sodium Hydrogen Carbonate for Industrial Use - Determination of Iron Content - 110-Penanthroline Photometric Method-First Edition | |
| ISO 2461 | EN-Sodium Chlorate for Industrial Use - Determination of Matter Insoluble in Water-First Edition | |
| ISO 2462 | EN-Sodium Chlorate for Industrial Use - Determination of Moisture Content - Gravimetric Method-First Edition | |
| ISO 2463 | EN-Sodium Chlorate for Industrial Use - Determination of Chloride Content - Mercurimetric Method-First Edition | |
| ISO 2466 | EN-Potassium Hydroxide for Industrial Use - Sampling - Test Sample - Preparation of the Main Solution for Carrying out Certain Determinations-First Edition | |
| ISO 2479 | EN-Sodium Chloride for Industrial Use - Determination of Matter Insoluble in Water or in Acid and Preparation of Principal Solutions for Other Determinations-First Edition | |
| ISO 2480 | EN-Sodium Chloride for Industrial Use - Determination of Sulphate Content - Barium Sulphate Gravimetric Method-First Edition | |
| ISO 2481 | EN-Sodium Chloride for Industrial Use - Determination of Halogens Expressed as Chlorine - Mercurimetric Method-First Edition | |
| ISO 2482 | EN-Sodium Chloride for Industrial Use - Determination of Calcium and Magnesium Contents - EDTA Complexometric Methods-First Edition | |
| ISO 2483 | EN-Sodium Chloride for Industrial Use - Determination of the Loss of Mass at 110 Degrees Celsius-First Edition | |
| ISO 2495 | EN-Iron Blue Pigments - Specifications and Methods of Test-Second Edition | |
| ISO 24998 | EN-Plastics laboratory ware - Single-use Petri dishes for microbiological procedures-First Edition | |
| ISO 25537 | EN-Glass in building - Silvered flat-glass mirror-First Edition | |
| ISO 25619-1 | EN-Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties-First Edition | |
| ISO 25619-2 | EN-Geosynthetics - Determination of compression behaviour - Part 2: Determination of short-term compression behaviour-First Edition | |
| ISO 257 | EN-Pesticides and other agrochemicals Principles for the selection of common names-Third Edition | |
| ISO 2590 | EN-General Method for the Determination of Arsenic - Silver Diethyldithiocarbamate Photometric Method-First Edition | |
| ISO 2594 | EN-Building Drawings - Projection Methods-First Edition; Erratum-1972 | |
| ISO 2633 | EN-Determination of Imposed Floor Loads in Production Buildings and Warehouses First Edition | |
| ISO 26423 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) - Determination of coating thickness by crater-grinding method-First Edition | |
| ISO 26424 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) - Determination of the abrasion resistance of coatings by a micro-scale abrasion test-First Edition | |
| ISO 26443 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings-First Edition | |
| ISO 26602 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) - Silicon nitride materials for rolling bearing balls-First Edition | |
| ISO 26945 | EN-Metallic and other inorganic coatings - Electrodeposited coatings of tin-cobalt alloy-First Edition | |
| ISO 2696 | EN-Fibre Building Boards - Hard and Medium Boards for General Purposes - Quality Specifications - Water Absorption and Swelling in Thickness First Edition | |
| ISO 2718 | EN-Standard Layout for a Method of Chemical Analysis by Gas Chromatography First Edition | |
| ISO 27327-1 | EN-Fans - Air curtain units - Part 1: Laboratory methods of testing for aerodynamic performance rating-First Edition | |
| ISO 27447 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) - Test method for antibacterial activity of semiconducting photocatalytic materials-First Edition | |
| ISO 27448 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) - Test method for self-cleaning performance of semiconducting photocatalytic materials - Measurement of water contact angle-First Edition | |
| ISO 2746 | EN-Vitreous and Porcelain Enamels - Enamelled Articles for Service under Highly Corrosive Conditions - High Voltage Test-Second Edition | |
| ISO 2747 | EN-Vitreous and Porcelain Enamels - Enamelled Cooking Utensils - Determination of Resistance to Thermal Shock-Second Edition | |
| ISO 27528 | EN-Wood-based panels - Determination of resistance to axial withdrawal of screws-First Edition | |
| ISO 27567 | EN-Laminated veneer lumber - Measurement of dimensions and shape - Method of test-First Edition | |
| ISO 276 | EN-Binders for Paints and Varnishes - Linseed Stand Oil - Requirements and Methods of Test-Second Edition | |
| ISO 2762 | EN-Hydrochloric Acid for Industrial Use - Determination of Soluble Sulphates - Turbidimetric Method First Edition | |
| ISO 277 | EN-Binders for Paints and Varnishes - Raw Tung Oil - Requirements and Methods of Test-Second Edition | |
| ISO 2776 | EN-Modular Co-Ordination - Co-Ordinating Sizes for Doorsets - External and Internal First Edition | |
| ISO 27769-1 | EN-Wood-based panels - Wet-process fibreboard - Part 1: Classifications-First Edition | |
| ISO 27769-2 | EN-Wood-based panels - Wet-process fibreboard - Part 2: Requirements-First Edition | |
| ISO 2777 | EN-Modular Co-Ordination - Co-Ordinating Sizes for Rigid Flat Sheet Boards Used in Building First Edition | |
| ISO 27830 | EN-Metallic and other inorganic coatings - Guidelines for specifying metallic and inorganic coatings-First Edition | |
| ISO 27831-1 | EN-Metallic and other inorganic coatings - Cleaning and preparation of metal surfaces - Part 1: Ferrous metals and alloys-First Edition | |
| ISO 27831-2 | EN-Metallic and other inorganic coatings - Cleaning and preparation of metal surfaces - Part 2: Non-ferrous metals and alloys-First Edition | |
| ISO 27874 | EN-Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for electrical electronic and engineering purposes - Specification and test methods-First Edition | |
| ISO 279 | EN-Essential Oils - Determination of Relative Density at 20 Degrees C - Reference Method-second Edition |