ISO - Chemical Engineering Collection
This collection contains documents from the following standards organization(s): International Organization for Standardization
| ISO 13954 | EN-Plastics Pipes and Fittings - Peel Decohesion Test for Polyethylene (PE) Electrofusion Assemblies of Nominal Outside Diameter Greater Than or Equal to 90 mm-First Edition | |
| ISO 13955 | EN-Plastics Pipes and Fittings - Crushing Decohesion Test for Polyethylene (PE) Electrofusion Assemblies-First Edition | |
| ISO 13957 | EN-Plastics Pipes and Fittings - Polyethylene (PE) Tapping Tees - Test Method for Impact Resistance-First Edition | |
| ISO 13965 | EN-Meat and Meat Products - Determination of Starch and Glucose Contents - Enzymatic Method-First Edition | |
| ISO 13966 | EN-Thermoplastics Pipes and Fittings - Nominal Ring Stiffnesses-First Edition | |
| ISO 13967 | EN-Thermoplastics fittings - Determination of ring stiffness-Second Edition | |
| ISO 13968 | EN-Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility-Second Edition | |
| ISO 13984 | EN-Liquid Hydrogen - Land Vehicle Fuelling System Interface-First Edition | |
| ISO 13985 | EN-Liquid hydrogen Land vehicle fuel tanks-First Edition | |
| ISO 1401 | EN-Rubber Hoses for Agricultural Spraying-Third Edition | |
| ISO 1402 | EN-Rubber and plastics hoses and hose assemblies - Hydrostatic testing-Fourth Edition | |
| ISO 1403 | EN-Rubber Hoses Textile-Reinforced for General-Purpose Water Applications - Specification-Fourth edition | |
| ISO 1407 | EN-Rubber - Determination of solvent extract-Third Edition | |
| ISO 1408 | EN-Rubber - Determination of Carbon Black Content - Pyrolytic and Chemical Degradation Methods-Third Edition | |
| ISO 1409 | EN-Plastics/rubber Polymer dispersions and rubber latices (natural and synthetic) Determination of surface tension by the ring method-Fifth Edition | |
| ISO 14113 | EN-Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)-Second Edition | |
| ISO 14125 | EN-Fibre-Reinforced Plastic Composites - Determination of Flexural Properties-First Edition; Technical Corrigendum 1: 07/15/2001 | |
| ISO 14126 | EN-Fibre-Reinforced Plastic Composites - Determination of Compressive Properties in the In-Plane Direction-First Edition; Replaces ISO 8515: 1991; Corrigendum 1 7/15/2001 | |
| ISO 14127 | EN-Carbon-fibre-reinforced composites - Determination of the resin fibre and void contents-First Edition | |
| ISO 14129 | EN-Fibre-Reinforced Plastic Composites - Determination of the In -Plane Shear Stress/Shear Strain Response Including the In-Plane Shear Modulus and Strength by the Plus or Minus 45 Degrees Tension Test Method-First Ed | |
| ISO 14130 | EN-Fibre-Reinforced Plastic Composites - Determination of Apparent Interlaminar Shear Strength by Short-Beam Method-First Edition; Corrigendum 1: 11/1/2003 | |
| ISO 14156 | EN-Milk and Milk Products - Extraction Methods for Lipids and Liposoluble Compounds-First Edition; IDF 172 | |
| ISO 14156 AMD 1 | EN-Milk and milk products - Extraction methods for lipids and liposoluble compounds AMENDMENT 1-First Edition | |
| ISO 14175 | EN-Welding consumables - Gases and gas mixtures for fusion welding and allied processes-Second Edition | |
| ISO 14180 | EN-Solid Mineral Fuels - Guidance on the Sampling of Coal Seams-First Edition | |
| ISO 14236 | EN-Plastics Pipes and Fittings - Mechanical-Joint Compression Fittings for Use with Polyethylene Pressure Pipes in Water Supply Systems-First Edition | |
| ISO 14237 | EN-Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials-Second Edition | |
| ISO 14245 | EN-Gas cylinders Specifications and testing of LPG cylinder valves Self-closing-First Edition | |
| ISO 14246 | EN-Transportable Gas Cylinders - Gas Cylinder Valves - Manufacturing Tests and Inspections-First Edition | |
| ISO 1431-1 | EN-Rubber vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing-Fourth Edition; Replaces ISO 1431-2: 1/15/1994 | |
| ISO 1431-1 AMD 1 | EN-Rubber vulcanized or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing AMENDMENT 1-Fourth Edition | |
| ISO 1431-3 | EN-Rubber Vulcanized or Thermoplastic - Resistance to Ozone Cracking - Part 3: Reference and Alternative Methods for Determining the Ozone Concentration in Laboratory Test Chambers-First Edition | |
| ISO 14315 | EN-Industrial Wire Screens - Technical Requirements and Testing-First Edition | |
| ISO 1432 | EN-Rubber Vulcanized or Thermoplastic - Determination of Low Temperature Stiffening (Gehman Test)-Third Edition; Corrigendum 1: 8/1/2003 | |
| ISO 1434 | EN-Natural Rubber in Bales - Amount of Bale Coating - Determination-Second Edition | |
| ISO 1435 | EN-Rubber Compounding Ingredients - Carbon Black (Pelletized) - Determination of Fines Content-Fourth Edition | |
| ISO 1436 | EN-Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification-Fourth Edition | |
| ISO 1436 CORR 1 | EN-Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification TECHNICAL CORRIGENDUM 1-Fourth Edition | |
| ISO 1437 | EN-Rubber compounding ingredients - Carbon black - Determination of sieve residue-Fourth edition | |
| ISO 14377 | EN-Canned Evaporated Milk - Determination of Tin Content - Method Using Graphite Furnance Atomic Absorption Spectrometry-First Edition; IDF 168 | |
| ISO 14378 | EN-Milk and dried milk - Determination of iodide content - Method using highperformance liquid chromatography-Second Edition | |
| ISO 1442 | EN-Meat and Meat Products - Determination of Moisture Content (Reference Method)-Second Edition | |
| ISO 14420 | EN-Carbonaceous products for the production of aluminium Baked anodes and shaped carbon products Determination of the coefficient of linear thermal expansion-First Edition | |
| ISO 14422 | EN-Carbonaceous Materials Used in the Production of Aluminium - Cold-Ramming Pastes - Methods of Sampling-First Edition | |
| ISO 14427 | EN-Carbonaceous materials used in the production of aluminium Cold and tepid ramming pastes Preparation of unbaked test specimens and determination of apparent density after compaction-First Edition | |
| ISO 14428 | EN-Carbonaceous materials for the production of aluminium - Cold and tepid ramming pastes - Expansion/shrinkage during baking-First Edition; Corrected version 06/15/07 | |
| ISO 1443 | EN-Meat and Meat Products - Determination of Total Fat Content-First Edition; PNS 570: 1992 | |
| ISO 14435 | EN-Carbonaceous materials for the production of aluminium Petroleum coke Determination of trace metals by inductively coupled plasma atomic emission spectrometry-First Edition | |
| ISO 14438 | EN-Glass in Building - Determination of Energy Balance Value - Calculation Method-First Edition | |
| ISO 1444 | EN-Meat and Meat Products - Determination of Free Fat Content-Second Edition | |
| ISO 14446 | EN-Binders for Paints and Varnishes - Determination of the Viscosity of Industrial Cellulose Nitrate Solutions and Classification of Such Solutions-First Edition | |
| ISO 1446 | EN-Green Coffee - Determination of Water Content Basic Reference Method-Second Edition | |
| ISO 14501 | EN-Milk and milk powder - Determination of aflatoxin M1 content - Clean-up by immunoaffinity chromatography and determination by high-performance liquid chromatography-Second edition | |
| ISO 14502-1 | EN-Determination of substances characteristic of green and black tea - Part 1: Content of total polyphenols in tea - Colorimetric method using Folin- Ciocalteu reagent-First edition | |
| ISO 14502-1 CORR 1 | EN-Determination of substances characteristic of green and black tea - Part 1: Content of total polyphenols in tea - Colorimetric method using Folin-Ciocalteu reagent TECHNICAL CORRIGENDUM 1-First Edition | |
| ISO 14502-2 | EN-Determination of substances characteristic of green and black tea - Part 2: Content of catechins in green tea - Method using high-performance liquid chromatography-First edition | |
| ISO 14502-2 CORR 1 | EN-Determination of substances characteristic of green and black tea - Part 2: Content of catechins in green tea - Method using high-performance liquid chromatography TECHNICAL CORRIGENDUM 1-First Edition | |
| ISO 1452-2 | EN-Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes-First Edition | |
| ISO 1452-3 | EN-Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings-First Edition | |
| ISO 1452-4 | EN-Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves-First Edition | |
| ISO 1452-5 | EN-Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system-First Edition | |
| ISO 14526-1 | EN-Plastics - Phenolic Powder Moulding Compounds (PF-PMCs) - Part 1: Designation System and Basis for Specifications-First Edition | |
| ISO 14526-2 | EN-Plastics - Phenolic Powder Moulding Compounds (PF-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties-First Edition | |
| ISO 14526-3 | EN-Plastics - Phenolic Powder Moulding Compounds (PF-PMCs) - Part 3: Requirements for Selected Moulding Compounds-First Edition | |
| ISO 14527-1 | EN-Plastics - Urea-Formaldehyde and Urea/Melamine-Formaldehyde Powder Moulding Compounds (UF- and UF/MF-PMCs) - Part 1: Designation System and Basis for Specifications-First Edition; (Together with ISO 14527-2;1999 ISO | |
| ISO 14527-2 | EN-Plastics - Urea-Formaldehyde and Urea/Melamine-Formaldehyde Powder Moulding Compounds (UF- and UF/MF-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties-First Edition | |
| ISO 14527-3 | EN-Plastics - Urea-Formaldehyde and Urea/Melamine-Formaldehyde Powder Moulding Compounds (UF- and UF/MF-PMCs) - Part 3: Requirements for Selected Moulding Compounds-First Edition | |
| ISO 14528-1 | EN-Plastics - Melamine-Formaldehyde Powder Moulding Compounds (MF-PMCs) - Part 1: Designation System and Basis for Specifications-First Edition | |
| ISO 14528-2 | EN-Plastics - Melamine-Formaldehyde Powder Moulding Compounds (MF-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties-First Edition | |
| ISO 14528-3 | EN-Plastics - Melamine-Formaldehyde Powder Moulding Compounds (MF-PMCs) - Part 3: Requirements for Selected Moulding Compounds-First Edition | |
| ISO 14529-1 | EN-Plastics - Melamine/Phenolic Powder Moulding Compounds (MF-PMCs) - Part 1: Designation System and Basis for Specifications-First Edition | |
| ISO 14529-2 | EN-Plastics - Melamine/Phenolic Powder Moulding Compounds (MF-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties-First Edition | |
| ISO 14529-3 | EN-Plastics - Melamine/Phenolic Powder Moulding Compounds (MF-PMCs) - Part 3: Requirements for Selected Moulding Compounds-First Edition | |
| ISO 14530-1 | EN-Plastics - Unsaturated-Polyester Powder Moulding Compounds (UP-PMCs) - Part 1: Designation System and Basis for Specifications-First Edition | |
| ISO 14530-2 | EN-Plastics - Unsaturated-Polyester Powder Moulding Compounds (UP-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties-First Edition | |
| ISO 14530-3 | EN-Plastics - Unsaturated-Polyester Powder Moulding Compounds (UP-PMCs) - Part 3: Requirements for Selected Moulding Compounds-First Edition | |
| ISO 14531-1 | EN-Plastics pipes and fittings Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels Metric series Specifications Part 1: Pipes-First Edition | |
| ISO 14531-2 | EN-Plastics pipes and fittings Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels Metric series Specifications Part 2: Fittings for heat-fusion jointing-First Edition | |
| ISO 14531-3 | EN-Plastics pipes and fittings Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels Metric series Specifications Part 3: Fittings for mechanical jointing (including PE-X/metal transitions |