ISO - Chemical Engineering Collection
This collection contains documents from the following standards organization(s): International Organization for Standardization
| ISO 24999 | EN-Flexible cellular polymeric materials - Determination of fatigue by a constant-strain procedure-First edition | |
| ISO 2505 | EN-Thermoplastics pipes - Longitudinal reversion - Test method and parameters-Second edition; Replaces ISO 2505-1 and 2505-2 | |
| ISO 2507-1 | EN-Thermoplastics Pipes and Fittings - Vicat Softening Temperature - Part 1: General Test Method-First Edition; Replaces ISO 2507 | |
| ISO 2507-2 | EN-Thermoplastics Pipes and Fittings - Vicat Softening Temperature - Part 2: Test Conditions for Unplasticized Poly(Vinyl Chloride) (PVC-U) or Chlorinated Poly(Vinyl Chloride) (PVC-C) Pipes and Fittings and for High Imp | |
| ISO 2507-3 | EN-Thermoplastics Pipes and Fittings - Vicat Softening Temperature - Part 3: Test Conditions for Acrylonitrile/ Butadiene/Styrene (ABS) and Acrylonitrile/ Styrene/Acrylic Ester (ASA) Pipes and Fittings-First Edition | |
| ISO 25137-1 | EN-Plastics - Sulfone polymer moulding and extrusion materials - Part 1: Designation system and basis for specifications-First Edition | |
| ISO 25137-2 | EN-Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties-First Edition | |
| ISO 25179 | EN-Adhesives - Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives-First Edition | |
| ISO 25217 | EN-Adhesives - Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens-First Edition | |
| ISO 2535 | EN-Plastics - Unsaturated-Polyester Resins - Measurement of Gel Time at Ambient Temperature-Third Edition | |
| ISO 25498 | EN-Microbeam analysis - Analytical electron microscopy - Selected-area electron diffraction analysis using a transmission electron microscope-First Edition | |
| ISO 25518 | EN-Single-use rubber gloves for general applications - Specification-First Edition | |
| ISO 25537 | EN-Glass in building - Silvered flat-glass mirror-First Edition | |
| ISO 2554 | EN-Plastics - Unsaturated Polyester Resins - Determination of Hydroxyl Value-Second Edition | |
| ISO 2555 | EN-Plastics - Resins in the Liquid State or as Emulsions or Dispersions - Determination of Apparent Viscosity by the Brookfield Test Method-Second Edition; Corrected and Reprinted- 1990 | |
| ISO 2556 | EN-Plastics - Determination of the Gas Transmission Rate of Films and Thin Sheets Under Atmospheric Pressure - Manometric Method-First Edition | |
| ISO 2561 | EN-Plastics Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography-Second Edition | |
| ISO 25760 | EN-Gas cylinders - Operational procedures for the safe removal of valves from gas cylinders-First Edition | |
| ISO 25761 | EN-Plastics - Polyols for use in the production of polyurethanes - Determination of basicity (total amine value) expressed as percent nitrogen-First Edition | |
| ISO 25762 | EN-Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites-First Edition | |
| ISO 2577 | EN-Plastics - Thermosetting moulding materials - Determination of shrinkage-Third Edition | |
| ISO 2578 | EN-Plastics - Determination of Time-Temperature Limits After Prolonged Exposure to Heat-Second Edition | |
| ISO 2580-1 | EN-Plastics - Acrylonitrile-Butadiene-Styrene (ABS) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications-Fifth Edition | |
| ISO 2580-2 | EN-Plastics - Acrylonitrile/ Butadiene/Styrene (ABS) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties-Third Edition | |
| ISO 2590 | EN-General Method for the Determination of Arsenic - Silver Diethyldithiocarbamate Photometric Method-First Edition | |
| ISO 2596 | EN-Iron ores Determination of hygroscopic moisture in analytical samples Gravimetric Karl Fischer and mass-loss methods-Fifth Edition | |
| ISO 2597-1 | EN-Iron ores Determination of total iron content Part 1: Titrimetric method after tin(II) chloride reduction-Second Edition | |
| ISO 2597-2 | EN-Iron ores - Determination of total iron content - Part 2: Titrimetric methods after titanium(III) chloride reduction-First Edition | |
| ISO 2598-1 | EN-Iron Ores - Determination of Silicon Content - Part 1: Gravimetric Methods-First Edition | |
| ISO 2598-2 | EN-Iron Ores - Determination of Silicon Content - Part 2: Reduced Molybdosilicate Spectrophotometric Method-First Edition; Replaces ISO 4686 | |
| ISO 2599 | EN-Iron Ores - Determination of Phosphorus Content - Titrimetric Method-Third Edition | |
| ISO 26142 | EN-Hydrogen detection apparatus - Stationary applications-First Edition | |
| ISO 26323 | EN-Milk products - Determination of the acidification activity of dairy cultures by continuous pH measurement (CpH)-First Edition | |
| ISO 26423 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) - Determination of coating thickness by crater-grinding method-First Edition | |
| ISO 26424 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) - Determination of the abrasion resistance of coatings by a micro-scale abrasion test-First Edition | |
| ISO 26443 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings-First Edition | |
| ISO 26462 | EN-Milk - Determination of lactose content - Enzymatic method using difference in pH-First Edition | |
| ISO 265-1 | EN-Pipes and Fittings of Plastics Materials - Fittings for Domestic and Industrial Waste Pipes - Basic Dimensions: Metric Series - Part 1: Unplasticized Poly(Vinyl Chloride) (PVC-U)-First Edition | |
| ISO 26602 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) - Silicon nitride materials for rolling bearing balls-First Edition | |
| ISO 26603 | EN-Plastics - Aromatic isocyanates for use in the production of polyurethanes - Determination of total chlorine-First Edition | |
| ISO 26842-1 | EN-Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 1: Resistance to delamination in non-severe environments-First Edition | |
| ISO 26842-2 | EN-Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 2: Resistance to delamination in severe environments-First Edition | |
| ISO 26845 | EN-Chemical analysis of refractories - General requirements for wet chemical analysis atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods-First Edition | |
| ISO 27107 | EN-Animal and vegetable fats and oils - Determination of peroxide value - Potentiometric end-point determination-First Edition | |
| ISO 2718 | EN-Standard Layout for a Method of Chemical Analysis by Gas Chromatography First Edition | |
| ISO 27205 | EN-Fermented milk products - Bacterial starter cultures - Standard of identity-First Edition | |
| ISO 27327-1 | EN-Fans - Air curtain units - Part 1: Laboratory methods of testing for aerodynamic performance rating-First Edition | |
| ISO 27407 | EN-Hydraulic fluid power - Marking of performance characteristics on hydraulic filters-First Edition | |
| ISO 27447 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) - Test method for antibacterial activity of semiconducting photocatalytic materials-First Edition | |
| ISO 27448 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) - Test method for self-cleaning performance of semiconducting photocatalytic materials - Measurement of water contact angle-First Edition | |
| ISO 27588 | EN-Rubber vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale-First Edition | |
| ISO 2762 | EN-Hydrochloric Acid for Industrial Use - Determination of Soluble Sulphates - Turbidimetric Method First Edition | |
| ISO 27727 | EN-Rubber vulcanized - Measurement of fatigue crack growth rate-First Edition | |
| ISO 2781 | EN-Rubber vulcanized or thermoplastic - Determination of density-Fourth edition | |
| ISO 2781 AMD 1 | EN-Rubber vulcanized or thermoplastic - Determination of density AMENDMENT 1: Precision data-Fourth Edition | |
| ISO 2782 | EN-Rubber vulcanized or thermoplastic Determination of permeability to gases-Third Edition | |
| ISO 27892 | EN-Vacuum technology - Turbomolecular pumps - Measurement of rapid shutdown torque-First Edition | |
| ISO 27894 | EN-Vacuum technology - Vacuum gauges - Specifications for hot cathode ionization gauges-First Edition | |
| ISO 27895 | EN-Vacuum technology - Valves - Leak test-First Edition | |
| ISO 279 | EN-Essential Oils - Determination of Relative Density at 20 Degrees C - Reference Method-second Edition | |
| ISO 2796 | EN-Cellular Plastics Rigid - Test for Dimensional Stability Third Edition | |
| ISO 27971 | EN-Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology-First Edition | |
| ISO 27996 | EN-Aerospace fluid systems - Elastomer seals - Storage and shelf life-First Edition | |
| ISO 280 | EN-Essential Oils - Determination of Refractive Index-Second Edition | |
| ISO 28017 | EN-Rubber hoses and hose assemblies wire or textile reinforced for dredging applications - Specification-First Edition | |
| ISO 28078-1 | EN-Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 1: Designation system and basis for specifications-First Edition | |
| ISO 28078-2 | EN-Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties-First Edition | |
| ISO 2818 | EN-Plastics - Preparation of Test Specimens by Machining Third Edition | |
| ISO 2818 CORR 1 | EN-Plastics - Preparation of test specimens by machining TECHNICAL CORRIGENDUM 1 | |
| ISO 28198 | EN-Vegetable fats and oils - Determination of toluene insoluble matter-First Edition | |
| ISO 2825 | EN-Spices and Condiments - Preparation of a Ground Sample for Analysis Second Edition | |
| ISO 2826 | EN-Apricots - Guide to Cold Storage First Edition | |
| ISO 2828 | EN-Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Fluorine Content - Alizarin Complexone and Lanthanum Chloride Spectrophotometric Method First Edition | |
| ISO 2829 | EN-Aluminium Oxide Primarily Used for the Production of Aluminium - Determination of Phosphorus Content - Reduced Phosphomolybdate Spectrophotometric Method First Edition | |
| ISO 2830 | EN-Cryolite Natural and Artificial - Determination of Aluminium Content - Atomic Absorption Method First Edition | |
| ISO 2831 | EN-Sodium Fluoride for Industrial Use - Determination of Water-Insoluble Matter First Edition | |
| ISO 2832 | EN-Sodium Fluoride for Industrial Use - Determination of Moisture Content First Edition | |
| ISO 2833 | EN-Sodium Fluoride for Industrial Use - Determination of Fluorine Content - Modified Willard-Winter Method First Edition | |
| ISO 2851 | EN-Stainless Steel Bends and Tees for the Food Industry-Second Edition |