Print Page Email Page Smaller Text Larger Text

ISO - Chemical Engineering Collection

This collection contains documents from the following standards organization(s): International Organization for Standardization

Most Popular Standards from the ISO - Chemical Engineering Collection

ISO 11469 EN-Plastics - Generic Identification and Marking of Plastic Products-Second Edition 
ISO 1133 EN-Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics-Fourth edition 
ISO 2852 EN-Stainless Steel Clamp Pipe Couplings for the Food Industry Second Edition 
ISO 1043-1 EN-Plastics - Symbols and Abbreviated Terms - Part 1: Basic Polymers and Their Special Characteristics-Third Edition 
ISO 4406 EN-Hydraulic Fluid Power - Fluids - Method for Coding the Level of Contamination by Solid Particles-Second Edition 
ISO 22196 EN-Plastics - Measurement of antibacterial activity on plastics surfaces-First Edition 
ISO GUIDE 30 EN-Terms and Definitions Used in Connection with Reference Materials-Second Edition 
ISO 23671 EN-Passenger car tyres Method for measuring relative wet grip performance Loaded new tyres-First Edition 
ISO 178 EN-Plastics - Determination of Flexural Properties-Fourth Edition; Amendment 1: 02/15/2004 
ISO 7268 EN-Pipe Components - Definition of Nominal Pressure-First Edition; Amendment 1: 1984 
ISO 12151-2 EN-Connections for hydraulic fluid power and general use Hose fittings Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24- cone connector ends with O-rings-First Edition 
ISO 7241-1 EN-Hydraulic Fluid Power - Quick-Action Couplings - Part 1: Dimensions and Requirements First Edition 
ISO 4413 EN-Hydraulic Fluid Power - General Rules Relating to Systems-Second Edition 
ISO 6149-1 EN-Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated housing for O-ring seal-Second Edition 
ISO 3386-1 EN-Polymeric Materials Cellular Flexible - Determination of Stress-Strain Characteristic in Compression - Part 1: Low-Density Materials Second Edition 
ISO 11359-2 EN-Plastics - Thermomechanical Analysis (TMA) - Part 2: Determination of Coefficient of Linear Thermal Expansion and Glass Transition Temperature-First Edition 
ISO 12094 EN-Welded Steel Tubes for Pressure Purposes - Ultrasonic Testing for the Detection of Laminar Imperfections in Strips/Plates Used in the Manufacture of Welded Tubes First Edition 
ISO 11359-1 EN-Plastics - Thermomechanical Analysis (TMA) - Part 1: General Principles-First Edition 
ISO 11119-1 EN-Gas Cylinders of Composite Construction - Specification and Test Methods - Part 1: Hoop Wrapped Composite Gas Cylinders-First Edition 
ISO 7214 EN-Cellular Plastics - Polyethylene - Methods of Test-Third Edition 
ISO 5752 EN-Metal Valves for Use in Flanged Pipe Systems - Face-to-Face and Centre-to-Face Dimensions Second Edition 
ISO 1219-2 EN-Fluid Power Systems and Components - Graphic Symbols and Circuit Diagrams - Part 2: Circuit Diagrams-First Edition 
ISO 7005-1 EN-Metallic Flanges - Part 1: Steel Flanges First Edition; (AS/NZS 4331.1: 1995) 
ISO 4200 EN-Plain End Steel Tubes Welded and Seamless - General Tables of Dimensions and Masses per Unit Length-Fourth Edition; Replaces ISO 134: 1973 and ISO 336: 1976 
ISO 5199 EN-Technical Specifications for Centrifugal Pumps - Class II-Second Editiom 
ISO 9906 EN-Rotodynamic Pumps - Hydraulic Performance Acceptance Tests - Grades 1 and 2-First Edition 
ISO 3696 EN-Water for Analytical Laboratory Use - Specification and Test Methods-First Edition 
ISO 9050 EN-Glass in Building - Determination of Light Transmittance Solar Direct Transmittance Total Solar Energy Transmittance Ultraviolet Transmittance and Related Glazing Factors-Second Edition 
ISO 2037 EN-Stainless Steel Tubes for the Food Industry-Second Edition 
ISO 868 EN-Plastics and Ebonite - Determination of Indentation Hardness by Means of a Durometer (Shore Hardness)-Third Edition 
ISO 6603-1 EN-Plastics - Determination of Puncture Impact Behaviour of Rigid Plastics - Part 1: Non-Instrumented Impact Testing-Second Edition 
ISO 49 EN-Malleable Cast Iron Fittings Threaded to ISO 7-1-Second Edition; Corrigendum 1 02/15/1997 
ISO 1179-2 EN-Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastom 
ISO 17292 EN-Metal ball valves for petroleum petrochemical and allied industries-First Edition 
ISO 6143 EN-Gas Analysis - Comparison Methods for Determining and Checking the Composition of Calibration Gas Mixtures-Second Edition; Cancels and Replaces ISO 6711:1981 
ISO 9385 EN-Glass and Glass-Ceramics - Knoop Hardness Test-First Edition 
ISO 527-2 EN-Plastics - Determination of Tensile Properties - Part 2: Test Conditions for Moulding and Extrusion Plastics-First Edition 
ISO 7005-2 EN-Metallic Flanges - Part 2: Cast Iron Flanges First Edition; (AS/NZS 4331.2: 1995) 
ISO 11926-2 EN-Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 725 Threads and O-Ring Sealing - Part 2: Heavy-Duty (S Series) Stud Ends First Edition (SAE J 1926/2) 
ISO 1043-2 EN-Plastics - Symbols and Abbreviated Terms - Part 2: Fillers and Reinforcing Materials-Second Edition 
ISO 4892-1 EN-Plastics - Methods of Exposure to Laboratory Light Sources - Part 1: General Guidance-Second Edition 
ISO GUIDE 35 EN-Reference materials - General and statistical principles for certification-Third Edition 
ISO 10964 EN-Adhesives - Determination of Torque Strength of Anaerobic Adhesives on Threaded Fasteners First Edition 
ISO 3601-3 EN-Fluid power systems - O-rings - Part 3: Quality acceptance criteria-Second Edition; Corrected and Reprinted 04/15/2006 
ISO 75-2 EN-Plastics - Determination of Temperature of Deflection under Load - Part 2: Plastics and Ebonite-Second Edition 
ISO GUIDE 31 EN-Reference Materials - Contents of Certificates and Labels-Second Edition 
ISO 3167 EN-Plastics - Multipurpose Test Specimens-Fourth Edition 
ISO 3669 EN-Vacuum Technology - Bakable Flanges - Dimensions First Edition 
ISO 13586 EN-Plastics Determination of fracture toughness (GIC and KIC) Linear elastic fracture mechanics (LEFM) approach AMENDMENT 1: Guidelines for the testing of injection-moulded plastics containing discontinuous reinforcin 
ISO 3251 EN-Paints varnishes and plastics - Determination of non-volatile-matter content-Fourth Edition 

View Alphabetical Listing of Documents