ISO - Aerospace Collection
This collection contains documents from the following standards organization(s): International Organization for Standardization
| ISO 7718-2 | EN-Aircraft - Passenger doors interface requirements for connection of passenger boarding bridge - Part 2: Upper deck doors-First Edition | |
| ISO 7913 | EN-Aerospace - Bolts and Screws Metric - Tolerances of Form and Position Second Edition | |
| ISO 7938 | EN-Aircraft - Ball Bearings for Control Cable Pulleys - Dimensions and Loads First Edition | |
| ISO 7939 | EN-Aircraft - Non-Metallic Pulleys with Ball Bearings for Control Cables - Dimensions and Loads First Edition | |
| ISO 7961 | EN-Aerospace - Bolts - Test Methods First Edition | |
| ISO 7995 | EN-Aerospace - Nuts Hexagonal Self-Locking with MJ Threads Classification 1 100 MPa (at Ambient Temperature)/235 Degrees Celsius 1 100 MPa(at Ambient Temperature)/315 Degrees Celsius and 1 100 MPa (at Ambient Tempe | |
| ISO 8056-1 | EN-Aircraft - Nickel-Chromium and Nickel-Aluminium Thermocouple Extension Cables - Part 1: Conductors - General Requirements and Tests First Edition | |
| ISO 8056-2 | EN-Aircraft - Nickel-Chromium and Nickel-Aluminium Thermocouple Extension Cables - Part 2: Terminations - General Requirments and Tests First Edition | |
| ISO 8056-3 | EN-Aircraft - Nickel-Chromium and Nickel-Aluminium Thermocouple Extension Cables - Part 3: Crimp-Type Ring Terminal Ends - Dimensions First Edition | |
| ISO 8056-4 | EN-Aircraft - Nickel-Chromium and Nickel-Aluminium Thermocouple Extension Cables - Part 4: Crimp-Type Butt Connectors - Dimensions First Edition | |
| ISO 8058 | EN-Air Cargo - Insulated Containers - Thermal Efficiency Requirements-Second Edition | |
| ISO 8074 | EN-Aerospace - Surface Treatment of Austenitic Stainless Steel Parts First Edition | |
| ISO 8075 | EN-Aerospace - Surface Treatment of Hardenable Stainless Steel Parts First Edition | |
| ISO 8078 | EN-Aerospace Process - Anodic Treatment of Aluminium Alloys - Sulfuric Acid Process Undyed Coating First Edition | |
| ISO 8079 | EN-Aerospace Process - Anodic Treatment of Aluminium Alloys - Sulfuric Acid Process Dyed Coating First Edition | |
| ISO 8080 | EN-Aerospace - Anodic Treatment of Titanium and Titanium Alloys - Sulfuric Acid Process First Edition | |
| ISO 8081 | EN-Aerospace Process - Chemical Conversion Coating for Aluminium Alloys - General Purpose First Edition | |
| ISO 8097 | EN-Aircraft - Minimum Airworthiness Requirements and Test Conditions for Certified Air Cargo Unit Load Devices-Fourth Edition | |
| ISO 8153-1 | EN-Aerospace fluid systems and components - Vocabulary - Part 1: Hose assemblies-First Edition | |
| ISO 8168 | EN-Aerospace - Bolts with MJ threads made of heat and corrosion resisting steel strength class 1 100 MPa - Procurement specification-Second Edition | |
| ISO 8177 | EN-Aerospace - Omega Clamps (Saddle Clamps) for Fluid Systems - Dimensions Second Edition | |
| ISO 8267-1 | EN-Aircraft Tow bar attachment fittings interface requirements Part 1: Main line aircraft-First Edition; Supersedes ISO 8267:1997 | |
| ISO 8267-2 | EN-Aircraft Tow bar attachment fittings interface requirements Part 2: Regional aircraft-First Edition; Supersedes ISO 8267:1997 | |
| ISO 8268 | EN-Air Cargo Equipment - Automobile Transport Devices - Basic Requirements First Edition | |
| ISO 8278 | EN-Aerospace - Hydraulic Pressure Compensated Variable Delivery Pumps - General Requirements First Edition | |
| ISO 8279 | EN-Aerospace - Nuts hexagonal plain normal height normal across flats with MJ threads classifications: 600 MPa (at ambient temperature)/120 °C 600 MPa (at ambient temperature)/235 °C 900 MPa (at ambient temp | |
| ISO 8280 | EN-Aerospace - Rivets Solid Universal Head Metallic Material with or without Surface Treatment - Dimensions First Edition | |
| ISO 8323 | EN-Freight Containers - Air/Surface (Intermodal) General Purpose Containers - Specification and Tests First Edition | |
| ISO 8399-1 | EN-Aerospace - Accessory Drives and Mounting Flanges (Metric Series) - Part 1: Design Criteria-First Edition | |
| ISO 8399-2 | EN-Aerospace - Accessory Drives and Mounting Flanges (Metric Series) - Part 2: Dimensions-First Edition | |
| ISO 8479 | EN-Aerospace - "Q" Clamps (Centre-Mounted Clamps) for Fluid Systems - Dimensions First Edition | |
| ISO 8538 | EN-Aerospace - Nuts Hexagonal Self-Locking with Counterbore and Captive Washer with MJ Threads Classifications: 1 100 MPa (at Ambient Temperature)/235 Degrees Celsius 1 100 MPa (at Ambient Temperature)/315 Degrees | |
| ISO 8574 | EN-Aerospace Hydraulic system tubing Qualification tests for bent tubes-Second Edition | |
| ISO 8575 | EN-Aerospace - Fluid Systems - Hydraulic System Tubing First Edition | |
| ISO 8591-1 | EN-Aerospace - Wrought Aluminium and Aluminium Alloys - Inspection Testing and Supply Requirements - Part 1: General Requirements First Edition | |
| ISO 8625-1 | EN-Aerospace - Fluid Systems - Vocabulary - Part 1: General Terms and Definitions Relating to Pressure First Edition | |
| ISO 8625-2 | EN-Aerospace - Fluid Systems - Vocabulary - Part 2: General Terms and Definitions Relating to Flow First Edition | |
| ISO 8625-3 | EN-Aerospace - Fluid Systems - Vocabulary - Part 3: General Terms and Definitions Relating to Temperature First Edition | |
| ISO 8641 | EN-Aerospace - Self-locking nuts with maximum operating temperature greater than 425 °C - Procurement specification-Second Edition | |
| ISO 8642 | EN-Aerospace - Self-locking nuts with maximum operating temperature greater than 425 Degrees Celsius - Test methods-Second Edition | |
| ISO 8668-1 | EN-Aircraft - Terminal Junction Systems - Part 1: Characteristics First Edition | |
| ISO 8668-2 | EN-Aircraft - Terminal Junction Systems - Part 2: Tests First Edition | |
| ISO 8668-3 | EN-Aircraft - Terminal Junction Systems - Part 3: Detail Specification for Type 1 System First Edition | |
| ISO 8668-4 | EN-Aircraft - Terminal Junction Systems - Part 4: Detail Specification for Type 2 System First Edition | |
| ISO 8668-5 | EN-Aircraft - Terminal Junction Systems - Part 5: Detail Specification for Type 3 System First Edition | |
| ISO 8668-6 | EN-Aircraft - Terminal Junction Systems - Part 6: Detail Specification for Type 4 System First Edition | |
| ISO 8775 | EN-Aerospace - Gaseous Oxygen Replenishment Connection for Use in Fluid Systems (New Type) - Dimensions (Inch Series) First Edition | |
| ISO 8788 | EN-Aerospace - Nuts Metric - Tolerances of Form and Position-Second Edition | |
| ISO 8815 | EN-Aircraft - Electrical Cables and Cable Harnesses - Vocabulary-First Edition; Corrected and Reprinted 10/15/1998 | |
| ISO 8816 | EN-Aircraft - Solid-State Remote Power Controllers - General Requirements First Edition | |
| ISO 8829-1 | EN-Aerospace - Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies - Part 1: Metallic (stainless steel) braid-First Edition | |
| ISO 8829-2 | EN-Aerospace Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies Part 2: Non-metallic braid-First Edition;:1990 | |
| ISO 8843 | EN-Aircraft - Crimp-removable contacts for electrical connectors - Identification system-Second Edition | |
| ISO 8913 | EN-Aerospace Lightweight polytetrafluoroethylene (PTFE) hose assemblies classification 400 °F/3 000 psi (204 °C/20 684 kPa) and 204 °C/21 000 kPa (400 °F/3 046 psi) Procurement specification-Third edition | |
| ISO 8940 | EN-Aerospace - Nuts Anchor Self-Locking Sealing Floating Two-Lug with Counterbore with MJ Threads Classifications 900 MPa (at Ambient Temperature)/ 120 Degrees Celsius 900 MPa (at Ambient Temperature)/175 Degree | |
| ISO 9031 | EN-Air Cargo Equipment - Handling Systems for Unit Load Devices (ULDs) - Symbols for Pictorial Representation First Edition | |
| ISO 9139 | EN-Aerospace - Nuts Plain or Slotted (Castellated) - Procurement Specification-First Edition | |
| ISO 9140 | EN-Aerospace - Nuts Plain or Slotted (Castellated) - Test Methods-First Edition | |
| ISO 9152 | EN-Aerospace - Bolts with MJ Threads in Titanium Alloys Strength Class 1 100 MPa - Procurement Specification-First Edition | |
| ISO 9154 | EN-Aerospace - Bolts with MJ Threads Made of Heat-Resistant Nickel-Based Alloy Strength Class 1 550 MPa - Procurement Specification-First Edition | |
| ISO 9156 | EN-Aerospace - Nuts Anchor Self-Locking Fixed 90 Degree Corner Reduced Series with Counterbore with MJ Threads Classifications: 1 100 MPa (at Ambient Temperature)/235 Degrees Celsius 1 100 MPa (at Ambient Tempe | |
| ISO 9157 | EN-Aerospace - Nuts Spline-Drive Self-Locking with MJ Threads Classifications: 1 100 MPa (at Ambient Temperature)/425 Degrees C 1 100 MPa (at Ambient Temperature)/650 Degrees C 1 210 MPa (at Ambient Temperature)/4 | |
| ISO 9199 | EN-Aerospace - Nuts Bihexagonal Self-Locking MJ Threads Classifications 1 100 MPa (at Ambient Temp.)/425 Degrees C 1 100 MPa (at Ambient Temp.)/650 Degrees C 1 210 MPa (at Ambient Temp.)/425 Degrees C 1 210 MPa ( | |
| ISO 9206 | EN-Aerospace - Constant Displacement Hydraulic Motors - General Specifications First Edition | |
| ISO 9216 | EN-Aerospace - Nuts hexagonal slotted (castellated) for pulleys in alloy steel and cadmium plated or in corrosion-resistant steel and passivated - Dimensions and masses-First Edition | |
| ISO 9217 | EN-Aerospace - Washers chamfered with counterbore for pulleys in alloy steel and cadmium plated or in corrosion-resistant steel and passivated - Dimensions and masses-First Edition | |
| ISO 9218 | EN-Aerospace - Washers flat for pulleys in alloy steel cadmium plated or in corrosion-resistant steel and passivated - Dimensions and masses-First Edition | |
| ISO 9219 | EN-Aerospace - Bolts thin hexagonal head for pulleys close tolerance shank short thread in alloy steel and cadmium plated or in titanium alloy and MoS2 lubricated or in corrosion-resistant steel and passivated - Di | |
| ISO 9254 | EN-Aerospace - Bolts Normal Spine Head Normal or Pitch Diameter Shank Long Length MJ Threads Metallic Material Coated or Uncoated Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition | |
| ISO 9255 | EN-Aerospace - Bolts normal spline head normal shank short or medium length MJ threads metallic material coated or uncoated strength classes less than or equal to 1 100 MPa - Dimensions-Second Edition | |
| ISO 9256 | EN-Aerospace - Bolts Large Hexagonal Head Normal or Pitch Diameter Shank Long Length MJ Threads Metallic Material Coated or Uncoated Strength Classes Less Than or Equal to 1 100 MPa - Dimensions First Edition | |
| ISO 9418 | EN-Aerospace - Rivets Solid in Aluminium or Aluminium Alloys - Procurement Specification-First Edition | |
| ISO 9469 | EN-Air Cargo Equipment - Unit Load Devices for Transportation of Horses First Edition | |
| ISO 9528 | EN-Aerospace - Standard-Weight Polytetrafluoroethylene (PTFE) Hose Assemblies Classification 204 Degrees Celsius/21 000 kPa - Procurement Specification Second Edition | |
| ISO 9538 | EN-Aerospace - Hydraulic Tubing Joints and Fittings - Planar Flexure Test First Edition | |
| ISO 9609 | EN-Aerospace - Nuts Hexagonal Plain Reduced Height Normal Across Flats with MJ Threads Classifications: 450 MPa (at Ambient Temp.)/120 Deg. C 450 MPa (at Ambient Temp.)/235 Deg. C 600 MPa (at Ambient Temp.)/425 | |
| ISO 9618 | EN-Aerospace-Nuts Hex. Slotted (Castellated) Red. Hght. Norm. Across Flats With MJ Threads Cl.s: 450MPa (at Ambient Temp)/120 Deg. C450MPa (at Ambient Temp)/235 Deg. C 600MPa(at Ambient Temp)/425 Deg. C 900MPa( | |
| ISO 9634 | EN-Aerospace - Fluid Systems - Dimensions of Plastic Protective Caps and Plugs First Edition | |
| ISO 9662 | EN-Aircraft Equipment - Environmental and Operating Conditions for Airborne Equipment - Humidity Temperature and Pressure Tests First Edition |