IEEE - Power Collection
This collection contains documents from the following standards organization(s): The Institute of Electrical and Electronics Engineers Inc.
| IEEE C37.232 | EN-Recommended Practice for Naming Time Sequence Data Files | |
| IEEE C37.233 | EN-Guide for Power System Protection Testing | |
| IEEE C37.234 | EN-Guide for Protective Relay Applications to Power System Buses | |
| IEEE C37.235 | EN-Guide for the Application of Rogowski Coils Used for Protective Relaying Purposes | |
| IEEE C37.24 | EN-Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear | |
| IEEE C37.26 | EN-Guide for Methods of Power Factor Measurement for Low-Voltage Inductive Test Circuits | |
| IEEE C37.27 | EN-Application Guide for Low-Voltage AC Power Circuit Breakers Applied with Separately-Mounted Current-Limiting Fuses | |
| IEEE C37.30 | EN-Standard Requirements for High-Voltage Switches | |
| IEEE C37.301 | EN-High-Voltage Switchgear (Above 1000 V) Test Techniques-Partial Discharge Measurements | |
| IEEE C37.32 | EN-High-Voltage Switches Bus Supports and Accessories Schedule of Preferred Ratings Construction Guidelines and Specifications | |
| IEEE C37.34 | EN-Standard Test Code for High-Voltage Air Switches | |
| IEEE C37.35 | EN-Guide for the Application Installation Operation and Maintenance of High-Voltage Air Disconnecting and Load Interrupter Switches | |
| IEEE C37.36B | EN-Guide to Current Interruption with Horn-Gap Air Switches | |
| IEEE C37.37 | EN-Loading Guide for AC High-Voltage Air Switches (In Excess of 1000 V) | |
| IEEE C37.40 | EN-Service Conditions and Definitions for High-Voltage Fuses Distribution Enclosed Single-Pole Air Switches Fuse Disconnecting Switches and Accessories | |
| IEEE C37.40 ERTA | EN-Errata to IEEE Standard Service Conditions and Definitions for High-Voltage Fuses Distribution Enclosed Single-Pole Air Switches Fuse Disconnecting Switches and Accessories | |
| IEEE C37.41 | EN-Standard Design Tests for High-Voltage (>1000 V) Fuses Fuse and Disconnecting Cutouts Distribution Enclosed Single-Pole Air Switches Fuse Disconnecting Switches and Fuse Links and Accessories Used with These Devi | |
| IEEE C37.41 ERTA | EN-Errata to IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses Fuse and Disconnecting Cutouts Distribution Enclosed Single-Pole Air Switches Fuse Disconnecting Switches and Fuse Links and Accessories Used | |
| IEEE C37.42 | EN-Specifications for High-Voltage (Greater Than 1000 V) Expulsion-Type Distribution-Class Fuses Fuse and Disconnecting Cutouts Fuse Disconnecting Switches and Fuse Links and Accessories Used with These Devices | |
| IEEE C37.43 | EN-Specifications for High- Voltage Expulsion Current-Limiting and Combination-Type Distribution and Power Class External Fuses with Rated Voltages from 1 kV through 38 kV Used for the Protection of Shunt Capacitors | |
| IEEE C37.45 | EN-Standard Specifications for High- Voltage Distribution Class Enclosed Single-Pole Air Switches with Rated Voltages from 1 kV through 8.3 kV | |
| IEEE C37.46 | EN-High Voltage Expulsion and Current-Limiting Type Power Class Fuses and Fuse Disconnecting Switches | |
| IEEE C37.47 | EN-High Voltage Current-Limiting Type Distribution Class Fuses and Fuse Disconnecting Switches | |
| IEEE C37.48 | EN-Guide for the Application Operation and Maintenance of High-Voltage Fuses Distribution Enclosed Single-Pole Air Switches Fuse Disconnecting Switches and Accessories | |
| IEEE C37.48.1 | EN-Guide for the Operation Classification Application and Coordination of Current-Limiting Fuses with Rated Voltages 1-38 kV | |
| IEEE C37.53.1 | EN-American National Standard High-Voltage Current-Limiting Motor-Starter Fuses Conference Test Procedures-Replaces NEMA C37.53.1-1989 | |
| IEEE C37.59 | EN-Standard Requirements for Conversion of Power Switchgear Equipment | |
| IEEE C37.60 | EN-Standard Requirements for Overhead Pad-Mounted Dry Vault and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV | |
| IEEE C37.60 CORR 1 | EN-Standard Requirements for Overhead Pad-Mounted Dry Vault and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV | |
| IEEE C37.63 | EN-Standard Requirements for Overhead Pad-Mounted Dry-Vault and Submersible Automatic Line Sectionalizers for AC Systems | |
| IEEE C37.66 | EN-Standard Requirements for Capacitor Switches for AC Systems (1 kV to 38 kV) IEEE 3 Park Avenue New York NY 10016-5997 USA 22 March 2006 IEEE Power Engineering Society Sponsored by the Switchgear Committee | |
| IEEE C37.74 | EN-Standard Requirements for Subsurface Vault and Pad-Mounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems Up to 38 kV-:2001 | |
| IEEE C37.74 INT 1 | EN-Standard Requirements for Subsurface Vault and Pad-Mounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems Up to 38 kV | |
| IEEE C37.81 | EN-Guide for Seismic Qualification of Class 1E Metal-Enclosed Power Switchgear Assemblies | |
| IEEE C37.82 | EN-The Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations | |
| IEEE C37.90 | EN-Standard for Relays and Relay Systems Associated with Electric Power Apparatus | |
| IEEE C37.90.1 | EN-Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus | |
| IEEE C37.90.1 ERTA 1 | EN-Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus | |
| IEEE C37.90.1 ERTA 2 | EN-Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus | |
| IEEE C37.90.2 | EN-Standard for Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from Transceivers | |
| IEEE C37.90.3 | EN-Standard Electrostatic Discharge Tests for Protective Relays | |
| IEEE C37.91 | EN-Guide for Protective Relay Applications to Power Transformers-Best Copy Available | |
| IEEE C37.93 | EN-Guide for Power System Protective Relay Applications of Audio Tones Over Voice Grade Channels | |
| IEEE C37.94 | EN-Standard for N Times 64 Kilobit Per Second Optical Fiber Interfaces Between Teleprotection and Multiplexer Equipment-Best Copy Available | |
| IEEE C37.95 | EN-Guide for Protective Relaying of Utility - Consumer Interconnections | |
| IEEE C37.96 | EN-IEEE Guide for AC Motor Protection | |
| IEEE C37.99 | EN-Guide for the Protection of Shunt Capacitor Banks | |
| IEEE C50.12 | EN-Salient-Pole 50 Hz and 60 Hz Synchronous Generators and Generator/Motors for Hydraulic Turbine Appications Rated 5 MVA and Above-Replaces ANSI C50.12 and NEMA C50.12 | |
| IEEE C50.13 | EN-Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above | |
| IEEE C57.100 | EN-Standard Test Procedure for Thermal Evaluation of Liquid-Immersed Distribution and Power Transformers | |
| IEEE C57.104 | EN-Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers | |
| IEEE C57.105 | EN-Guide for Application of Transformer Connections in Three-Phase Distribution Systems | |
| IEEE C57.106 | EN-Guide for Acceptance and Maintenance of Insulating Oil in Equipment | |
| IEEE C57.109 | EN-Guide for Liquid-Immersed Transformer Through-Fault-Current Duration | |
| IEEE C57.110 | EN-Recommended Practice for Establishing Liquid-Filled and Dry- Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents | |
| IEEE C57.111 | EN-Guide for Acceptance of Silicone Insulating Fluid and Its Maintenance in Transformers | |
| IEEE C57.113 | EN-Guide for Partial Discharge Measurement in Liquid-Filled Power Transformers and Shunt Reactors | |
| IEEE C57.116 | EN-Guide for Transformers Directly Connected to Generators | |
| IEEE C57.117 | EN-Guide for Reporting Failure Data for Power Transformers and Shunt Reactors on Electric Utility Power Systems | |
| IEEE C57.119 | EN-Recommended Practice for Performing Temperature Rise Tests on Oil-Immersed Power Transformers at Loads Beyond Nameplate Ratings | |
| IEEE C57.12.00 | EN-Standard General Requirements for Liquid-Immersed Distribution Power and Regulating Transformers | |
| IEEE C57.12.01 | EN-Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid-Cast and/or Resin Encapsulated Windings | |
| IEEE C57.12.10 | EN-230 kV and Below 833 / 958 through 8333 / 10 417 kVA Single-Phase and 750 / 862 through 60 000 / 80 000 / 100 000 kVA Three-Phase Without Load Tap Changing; and 3750 / 4687 through 60 000 / 80 000 / 100 000 kVA wi | |
| IEEE C57.12.10 INT 1 | EN-230 kV and Below 833 / 958 through 8333 / 10 417 kVA Single-Phase and 750 / 862 through 60 000 / 80 000 / 100 000 kVA Three-Phase Without Load Tap Changing; and 3750 / 4687 through 60 000 / 80 000 / 100 000 kVA wi | |
| IEEE C57.12.20 | EN-Standard for Overhead Type Distribution Transformers 500 kVA and Smaller: High Voltage 34500 Volts and Below; Low Voltage 7970/13800Y Volts and Below | |
| IEEE C57.12.20 INT 1-3 | EN-Overhead-Type Distribution Transformers 500 kVA and Smaller: High Voltage 34 500 V and Below; Low Voltage 7970/13 800Y V and Below | |
| IEEE C57.12.21 | EN-Requirements for Pad-Mounted Compartmental-Type Self-Cooled Single-Phase Distribution Transformers With High Voltage Bushings; High-Voltage 34500 GRYD/19920 Volts and Below; Low-Voltage 240/120 Volts; 167 kVA and | |
| IEEE C57.12.22 | EN-Transformers - Pad-Mounted Compartmental-Type Self-Cooled Three-Phase Distribution Transformers With High-Voltage Bushings 2500 kVA and Smaller: High Voltage 34 500 Grd Y/19 920 Volts and Below; Low Voltage 480 | |
| IEEE C57.12.23 | EN-Submersible Single-Phase Transformers: 167 kVA and Smaller; High Voltage 25 000 V and Below; Low Voltage 600 V and Below | |
| IEEE C57.12.24 | EN-Submersible Three-Phase Transformers 3750 kVA and Smaller: High Voltage 34 500 GrdY/19 920 Volts and Below; Low Voltage 600 Volts and Below | |
| IEEE C57.12.25 | EN-Transformers Pad-Mounted Compartmental-Type Self-Cooled Single-Phase Distribution Transformers with Separable Insulated High-Voltage Connectors; High Voltage 34 500 GrdY/19 920 Volts and Below; Low Voltage 240/ | |
| IEEE C57.12.26 | EN-Standard for Pad-Mounted Compartmental-Type Self-Cooled Three-Phase Distribution Transformers for Use with Separable Insulated High-Voltage Connectors (34 500 Grd Y/19 920 V and Below; 2500 kVA and Smaller)-Replac | |
| IEEE C57.12.28 | EN-Pad-Mounted EquipmentEnclosure Integrity | |
| IEEE C57.12.29 | EN-IEEE Standard for Pad-Mounted Equipment-Enclosure Integrity for Coastal Environments | |
| IEEE C57.12.31 | EN-Pole-Mounted Equipment Enclosure Integrity-Replaces NEMA C57.12.31-1996 | |
| IEEE C57.12.32 | EN-Standard for Submersible Equipment-Enclosure Integrity | |
| IEEE C57.12.34 | EN-Requirements for Pad-Mounted Compartmental-Type Self-Cooled Three-Phase Distribution Transformers 5 MVA and Smaller; High Voltage 34.5 kV Nominal System Voltage and Below; Low Voltage 15 kV Nominal System Volta | |
| IEEE C57.12.35 | EN-Bar Coding for Distribution Transformers and Step-Voltage Regulators | |
| IEEE C57.12.36 | EN-Standard Requirements for Liquid-Immersed Distribution Substation Transformers |