Print Page Email Page Smaller Text Larger Text

IEC - Machines and Motors Collection

This collection contains documents from the following standards organization(s): International Organization for Standardization, International Electrotechnical Commission

Most Popular Standards from the IEC - Machines and Motors Collection

IEC 60068-1 EN-Environmental Testing Part 1: General and Guidance-Sixth Edition; Amendment 1-1992 
IEC 60812 EN-Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)-Edition 2 
IEC 60534-4 EN-Industrial-Process Control Valves - Part 4: Inspection and Routine Testing-Edition 3.0 
IEC 60571 EN-Electronic Equipment Used on Rail Vehicles-Edition 2.1; Consolidated Reprint 
IEC 60034-14 EN-Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement evaluation and limits of vibration severity-Edition 3.1; Consolidated Reprint 
IEC 60068-2-52 EN-Environmental Testing - Part 2: Tests - Test Kb: Salt Mist Cyclic (Sodium Chloride Solution)-Second Edition; Corrigendum 1: 07/1996 
IEC 60068-2-1 EN-Environmental testing - Part 2-1: Tests - Test A: Cold-Edition 6.0 
IEC 60172 EN-Test procedure for the determination of the temperature index of enamelled winding wires-Edition 3.0 
IEC 61851-21 EN-Electric Vehicle Conductive Charging System - Part 21: Electric Vehicle Requirements for Conductive Connection to an A.C./D.C. Supply-First Edition; Replaces IEC 60718 
IEC 61709 EN-Electronic Components - Reliability - Reference Conditions for Failure Rates and Stress Models for Conversion-First Edition 
IEC 61326-1 EN-Electrical equipment for measurement control and laboratory use - EMC requirements - Part 1: General requirements-Edition 1.0 
IEC 60534-2-3 EN-Industrial-Process Control Valves - Part 2-3: Flow Capacity - Test Procedures-Second Edition 
IEC 60068-2-17 EN-Basic Environmental Testing Procedures Part 2: Tests - Test Q: Sealing-Fourth Edition 
IEC TS 60695-1-40 EN-Fire hazard testing Part 1-40: Guidance for assessing the fire hazard of electrotechnical products Insulating liquids-First Edition 
IEC 62280-1 EN-Railway applications Communication signalling and processing systems Part 1: Safety-related communication in closed transmission systems-First Edition 
IEC 60300-3-3 EN-Dependability management - Part 3-3: Application guide - Life cycle costing-Second Edition 
IEC 60695-10-2 CORR 1 EN-Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test CORRIGENDUM 1-Second Edition 
IEC 9506-5 EN-Industrial Automation Systems - Manufacturing Message Specification - Part 5: Companion Standard for Programmable Controllers-First Edition 
IEC 60310 EN-Railway applications Traction transformers and inductors on board rolling stock-Third Edition 
IEC 61882 EN-Hazard and Operability Studies (HAZOP Studies) - Application Guide-First Edition 
IEC 60721-1 EN-Classification of environmental conditions Part 1: Environmental parameters and their severities-Edition 2.2; Edition 2: 1990 Consolidated with Amendments 1: 1992 and 2: 1995 
IEC 60721-3-3 EN-Classification of environmental conditions Part 3-3: Classification of groups of environmental parameters and their severities Stationary use at weatherprotected locations-Edition 2.2; Edition 2: 1994 Consolidate 
IEC 60077-1 EN-Railway Applications - Electric Equipment for Rolling Stock - Part 1: General Service Conditions and General Rules-First Edition 
IEC 61511-3 EN-Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels-First Edition; Incorporates Corrigendum 1: 10/2004 
IEC 60721-3-4 EN-Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their Severities - Section 4: Stationary Use at Non-Weatherprotected Locations-Second Edition; Amendment 1 
IEC 61375-1 EN-Electric railway equipment - Train bus - Part 1: Train communication network-Edition 2.0 
IEC 60072-1 EN-Dimensions and Output Series for Rotating Electrical Machines Part 1: Frame Numbers 56 to 400 and Flange Numbers 55 to 1080-Sixth Edition; Incorporating Amendments 1 and 2 
IEC 60584-2 EN-Thermocouples Part 2: Tolerances-First Edition; Amendment 1: 06-1989 
IEC 60300-3-9 EN-Dependability Management - Part 3: Application Guide - Section 9: Risk Analysis of Technological Systems-First Edition; Replaces CSA Q634-91-CAN/CSA 
IEC 60850 EN-Railway applications - Supply voltages of traction systems-Edition 3.0 
IEC 62128-1 EN-Railway applications Fixed installations Part 1: Protective provisions relating to electrical safety and earthing-First Edition 
IEC 60584-1 EN-Thermocouples Part 1: Reference Tables-Second Edition 
IEC 60721-2-1 EN-Classification of environmental conditions Part 2-1: Environmental conditions appearing in nature Temperature and humidity-Edition 1.1; Edition 1: 1982 Consolidated with Amendment 1: 1987 
IEC 62279 EN-Railway Applications Communications Signalling and Processing Systems Software for Railway Control and Protection Systems-First Edition 
IEC 60068-2-11 CORR 1 EN-Basic environmental testing procedures-Third Edition 
IEC 61133 EN-Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service-Edition 2.0 
IEC 61078 EN-Analysis techniques for dependability - Reliability block diagram and boolean methods-Edition 2 
IEC TR 60894 EN-Guide for a Test Procedure for the Measurement of Loss Tangent of Coils and Bars for Machine Windings-First Edition; Corrigendum 07/1987 
IEC 60381-1 EN-Analogue Signals for Process Control Systems Part 1: Direct Current Signals-Second Edition 
IEC 61165 EN-Application of Markov Techniques-Second Edition 
IEC 60034-7 EN-Rotating Electrical Machines - Part 7: Classification of Types of Construction Mounting Arrangements and Terminal Box Position (IM Code)-Edition 2.1; Edition 2:1992 Consolidated with Amendment 1:2000 
IEC 60072-2 EN-Dimensions and Output Series for Rotating Electrical Machines Part 2: Frame Numbers 355 to 1 000 and Flange Numbers 1180 to 2360-First Edition 
IEC 60034-6 EN-Rotating Electrical Machines Part 6: Methods of Cooling (IC Code)-Second Edition 
IEC 60068-2-78 EN-Environmental Testing - Part 2-78: Tests - Test 2-78: Body Cab: Damp Heat Steady State-First Edition; Replaces IEC 60068-2-3 and 60068-2-56 
IEC 60534-8-3 EN-Industrial-Process Control Valves - Part 8-3: Noise Considerations - Control Valve Aerodynamic Noise Prediction Method-Second Edition 
IEC 60721-3-5 EN-Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities - Section 5: Ground Vehicle Installations-Second Edition 
IEC 60721-3-2 EN-Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their Severities - Section 2: Transportation-Second Edition 
IEC 60534-1 EN-Industrial-Process Control Valves Part 1: Control Valve Terminology and General Considerations-Third Edition 
IEC 60034-5 EN-Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification-Edition 4.1; consolidated Reprint 
IEC 61131-1 EN-Programmable Controllers - Part 1: General Information-Second Edition