IEC - Insulation Collection
This collection contains documents from the following standards organization(s): International Electrotechnical Commission 1 2 3 4 5 > >
| IEC 60071-1 AMD 1 | EN-AMENDMENT 1 Insulation co-ordination - Part 1: Definitions principles and rules-Edition 8.0 | |
| IEC 60071-2 | EN-Insulation co-ordination - Part 2: Application guide-Third Edition | |
| IEC 60085 | EN-Electrical insulation - Thermal evaluation and designation-Edition 4.0 | |
| IEC 60093 | EN-Methods of Test for Volume Resistivity and Surface Resistivity of Solid Electrical Insulating Materials Second Edition-Edition 2 | |
| IEC 60099-1 | EN-Surge Arresters - Part 1: Non-Linear Resistor Type Gapped Surge Arresters for a.c. Systems-Edition 3.1; Edition 3: 1991 Consolidated with Amendment 1: 1999 | |
| IEC 60099-4 | EN-Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems-Edition 2.2; Consolidated Reprint | |
| IEC 60099-5 | EN-Surge Arresters - Part 5: Selection and Application Recommendations-Edition 1.1; Edition 1: 1996 Consolidated with Amendment 1: 1999 | |
| IEC 60099-6 | EN-Surge Arresters - Part 6: Surge Arresters Containing Both Series and Parallel Gapped Structures - Rated 52 kV and Less-First Edition | |
| IEC 60112 | EN-Method for the determination of the proof and the comparative tracking indices of solid insulating materials-Edition 4.1; Consolidated Reprint | |
| IEC 60120 | EN-Dimensions of Ball and Socket Couplings of String Insulator Units-Edition 3 | |
| IEC 60137 | EN-Insulated bushings for alternating voltages above 1 000 V-Edition 6.0 | |
| IEC 60156 | EN-Insulating Liquids - Determination of the Breakdown Voltage at Power Frequency - Test Method-Edition 2 | |
| IEC 60167 | EN-Methods of Test for the Determination of the Insulation Resistance of Solid Insulating Materials-First Edition | |
| IEC 60168 | EN-Tests on Indoor and Outdoor Post Insulators of Ceramic Material or Glass for Systems with Nominal Voltages Greater Than 1 000 V-Edition 4:1994 Consolidated with Amendments 1:1997 and 2:2000 | |
| IEC 60212 | EN-Standard Conditions for Use Prior to and During the Testing of Solid Electrical Insulating Materials-Second Edition | |
| IEC 60216-1 | EN-Electrical Insulating Materials - Properties of Thermal Endurance - Part 1: Ageing Procedures and Evaluation of Test Results-Fifth Edition | |
| IEC 60216-2 | EN-Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria-Edition 4 | |
| IEC 60216-3 | EN-Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics-Edition 2.0; Includes Access to Additional Content | |
| IEC 60216-4-1 | EN-Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens-Fourth Edition | |
| IEC 60216-4-2 | EN-Elecrical Insulating Materials - Thermal Endurance Properties - Part 4-2: Ageing Ovens - Precision Ovens for Use Up to 300 Degrees Celsius-First Edition | |
| IEC 60216-4-3 | EN-Elecrical Insulating Materials - Thermal Endurance Properties - Part 4-3: Ageing Ovens - Multi-Chamber Ovens-First Edition | |
| IEC 60216-5 | EN-Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material-Edition 3.0 | |
| IEC 60216-6 | EN-Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method-Edition 2.0; Includes A | |
| IEC 60243-1 | EN-Electrical Strength of Insulating Materials - Test Methods - Part 1: Tests at Power Frequencies-Second Edition | |
| IEC 60243-2 | EN-Electric Strength of Insulating Materials - Test Methods - Part 2: Additional Requirements for Tests Using Direct Voltage-Second Edition | |
| IEC 60243-3 | EN-Electric Strength of Insulating Materials - Test Methods - Part 3: Additional Requirements for 12/50 us Impulse Tests-Second Edition | |
| IEC 60247 | EN-Insulating liquids Measurement of relative permittivity dielectric dissipation factor (tan) and d.c. resistivity-Third Edition | |
| IEC 60250 | EN-Recommended Methods for the Determination of the Permittivity and Dielectric Dissipation Factor of Electrical Insulating Materials at Power Audio and Radio Frequencies Including Metre Wavelengths-First Edition | |
| IEC 60273 | EN-Characteristics of Indoor and Outdoor Post Insulators for Systems with Nominal Voltages Greater Than 1000 V-Edition 3 | |
| IEC 60296 | EN-Fluids for electrotechnical applications Unused mineral insulating oils for transformers and switchgear-Third Edition | |
| IEC 60305 | EN-Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V - Ceramic or Glass Insulator Units for A.C. Systems - Characteristics of Insulator Units of the Cap and Pin Type-Edition 4 | |
| IEC 60343 | EN-Recommended Test Methods for Determining the Relative Resistance of Insulating Materials to Breakdown by Surface Discharges-Edition 2; CENELEC EN 60343: 1992 | |
| IEC 60345 | EN-Method of Test for Electrical Resistance and Resistivity of Insulating Materials at Elevated Temperatures-First Edition | |
| IEC 60370 | EN-Test Procedure for Thermal Endurance of Insulating Varnishes - Electric Strength Method-Edition 1 | |
| IEC 60371-1 | EN-Specification for Insulating Materials Based on Mica Part 1: Definitions and General Requirements-Third Edition | |
| IEC 60371-2 | EN-Specification for insulating materials based on mica - Part 2: Methods of test-Third Edition | |
| IEC 60371-3-1 | EN-Specification for Insulating Materials Based on Mica - Part 3: Specifications for Individual Materials Sheet 1: Commutator Separators and Materials-Edition 3.0 | |
| IEC 60371-3-2 | EN-Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 2: Mica paper-Edition 2 | |
| IEC 60371-3-3 | EN-Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 3: Specification for Rigid Mica Materials for Heating Equipment-First Edition | |
| IEC 60371-3-4 | EN-Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 4: Polyester Film-Backed Mica Paper with a B-Stage Epoxy Resin Binder-First Edition; Amendment 1: 9/2006 | |
| IEC 60371-3-5 | EN-Insulating Materials Based on Mica - Part 3: Specifications for Individual Materials - Sheet 5: Glass-Backed Mica Paper with an Epoxy Resin Binder for Post-Impregnation (VPI)-Second Edition | |
| IEC 60371-3-6 | EN-Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 6: Glass-Backed Mica Paper with a B-Stage Epoxy Resin Binder-First Edition | |
| IEC 60371-3-6 AMD 1 | EN-Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 6: Glass-Backed Mica Paper with a B-Stage Epoxy Resin Binder-First Edition; Amendment 1: 9/2006 | |
| IEC 60371-3-7 AMD 1 | EN-Insulating Materials Based on Mica - Part 3: Specifications for Individual Materials - Sheet 7: Polyester Film Mica Paper with an Epoxy Resin Binder for Single Conductor Taping-First Edition; Corrigendum 1: 08/1995; | |
| IEC 60371-3-8 | EN-Insulating Materials Based on Mica - Part 3: Specifications for Individual Materials - Sheet 8: Mica Paper Tapes for Flame-Resistant Security Cables-Edition 1.0; Corrigendum 1: 08/1995 | |
| IEC 60371-3-8 AMD 1 | EN-Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables-Edition 1.0 | |
| IEC 60371-3-9 | EN-Insulating Materials Based on Mica - Part 3: Specifications for Individual Materials - Sheet 9: Moulding Micanite-First Edition; Corrigendum 1: 08/1995 | |
| IEC 60371-3-9 AMD 1 | EN-Amendment 1 Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite-Edition 1.0 | |
| IEC 60372 | EN-Locking Devices for Ball and Socket Couplings of String Insulator Units: Dimensions and Tests-Edition 3; Amendment 1-1991; Amendment 2 05-2003 | |
| IEC 60376 | EN-Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment-Edition 2 | |
| IEC 60377-1 | EN-Recommended Methods for the Determination of the Dielectric Properties of Insulating Materials at Frequencies Above 300 MHz Part 1: General-First Edition | |
| IEC 60377-2 | EN-Methods for the Determination of the Dielectric Properties of Insulating Materials at Frequencies Above 300 MHz Part 2: Resonance Methods-First Edition | |
| IEC 60383-1 | EN-Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V Part 1: Ceramic or Glass Insulator Units for A.C. Systems - Definitions Test Methods and Acceptance Criteria-Fourth Edition | |
| IEC 60383-2 | EN-Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V Part 2: Insulator Strings and Insulator Sets for A.C. Systems - Definitions Test Methods and Acceptance Criteria-First Edition | |
| IEC 60394-1 | EN-Varnished Fabrics for Electrical Purposes Part 1: Definitions and General Requirements-First Edition | |
| IEC 60394-2 | EN-Varnished Fabrics for Electrical Purposes Part 2: Methods of Test-First Edition | |
| IEC 60394-3-1 | EN-Varnished Fabrics for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 1: Oleoresinous Varnish-Cotton Base OR/C-First Edition | |
| IEC 60394-3-2 | EN-Varnished Fabrics for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Glass-Fabric Based Varnished Fabrics with Epoxy Polyurethane Silicone Polyester Bituminous or Oleoresinous Varnis | |
| IEC 60422 | EN-Mineral insulating oils in electrical equipment - Supervision and maintenance guidance-Edition 3 | |
| IEC 60426 | EN-Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods-Edition 2.0 | |
| IEC 60433 | EN-Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V - Ceramic Insulators for a.c. Systems - Characteristics of Insulator Units of the Long Rod Type-Third Edition | |
| IEC 60437 | EN-Radio Interference Test on High-Voltage Insulators-Second Edition | |
| IEC 60450 | EN-Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials-Edition 2.1; Consolidated Reprint | |
| IEC 60454-1 | EN-Specifications for pressure-sensitive adhesive tapes for electrical purposes Part 1: General requirements-Second Edition | |
| IEC 60454-2 | EN-Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test-Edition 3.0 | |
| IEC 60454-3-1 | EN-Pressure-sensitive adhesive tapes for electrical purposes Part 3 Specifications for individual materials Sheet 1: PVC film tapes with pressure-sensitive adhesive-Edition 2.1; Edition 2: 1998 Consolidated with Ame | |
| IEC 60454-3-11 | EN-Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament creped cellulosic paper polyester non-wove | |
| IEC 60454-3-11 | EN-Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 11: Combination Tapes Made of Creped Cellulosic Paper and Polyethylene Terephthalate Film with Rubbe | |
| IEC 60454-3-12 | EN-Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive- | |
| IEC 60454-3-14 | EN-Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 14: Polytetrafluoroethylene Film Tapes with Pressure-Sensitive Adhesive-First Edition | |
| IEC 60454-3-19 | EN-Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides-First E | |
| IEC 60454-3-2 | EN-Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting rubber thermoplastic or acry | |
| IEC 60454-3-4 | EN-Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper creped and non-creped with rubber thermosetting adhesive-Edition 3.0 | |
| IEC 60454-3-6 | EN-Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 6: Polycarbonate Film Tapes with Acrylic Thermoplastic Adhesive-Second Edition | |
| IEC 60454-3-7 | EN-Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 7: Polyimide Film Tapes with Pressure-Sensitive Adhesive-Second Edition | |
| IEC 60454-3-8 | EN-Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 8: Woven Fabric tapes with Pressure-Sensitive Adhesive based on glass cellulose acetate alone or co | |
| IEC 60455-1 | EN-Resin Based Reactive Compounds Used for Electrical Insulation - Part 1: Definitions and General Requirements-Second Edition | |
| IEC 60455-2 | EN-Resin Based Reactive Compounds Used for Electrical Insulation - Part 2: Methods of Test-Second Edition | |
| IEC 60455-2-2 | EN-Specification for solventless polymerisable resinous compounds used for electrical insulation Part 2: Methods of test Test methods for coating powders for electrical purposes-First Edition; Corrigendum 1: 08/1991 |
1 2 3 4 5 > >