GOST Russian Language - Manufacturing Engineering Collection
This collection contains documents from the following standards organization(s): Gosudarstvennye Standarty State Standard GOST (Russian)
| GOST 18812 | EN-Sheet stamping dies. Holders for guide posts with flute and guide bushes. Design and dimensions | |
| GOST 18813 | EN-Sheet stamping dies. Protective caps. Design and dimensions | |
| GOST 18815 | EN-Air line holders. Design and dimensions | |
| GOST 18816 | EN-Handling threaded dowel. Design and dimensions | |
| GOST 18817 | EN-"Handling lugs covering. Design and dimensions" | |
| GOST 18818 | EN-Bolsters with one aperture. Design and dimensions | |
| GOST 18819 | EN-Bolsters with two apertures. Design and dimensions | |
| GOST 18820 | EN-Bolsters with three apertures. Design and dimensions | |
| GOST 18821 | EN-Bolsters with four apertures. Design and dimensions | |
| GOST 18822 | EN-Bolsters with five apertures. Design and dimensions | |
| GOST 18823 | EN-Low bolsters. Design and dimensions | |
| GOST 18824 | EN-Parts and assembly units of sheet metal dies. Technical requirements | |
| GOST 18828 | EN-Ring single-ended square spanners. Design and dimensions | |
| GOST 18839 | EN-Machine-hand non-shaving taps. Design and dimensions | |
| GOST 18840 | EN-Nut non-shaving taps. Design and dimensions | |
| GOST 18841 | EN-Nut non-shaving taps with curved shanks. Design and dimensions | |
| GOST 18842 | EN-Non-shaving taps. Required dimensions | |
| GOST 18843 | EN-Non-slaving taps. Thread tolerances | |
| GOST 18844 | EN-Non-slaving taps. Technical requirements | |
| GOST 18868 | EN-HSS tipped bent bullnose turning tools. Design and dimensions | |
| GOST 18869 | EN-HSS straight bullnose turning tools. Design and dimensions | |
| GOST 18870 | EN-HSS side bullnose turning tools. Design and dimensions | |
| GOST 18871 | EN-HSS tipped face side turning tools. Design and dimensions | |
| GOST 18872 | EN-HSS boring and turning tools for through holes. Design and dimensions | |
| GOST 18873 | EN-HSS boring and turning tools for blind holes. Design and dimensions | |
| GOST 18874 | EN-HSS grooving and cutting-off turning tools. Design and dimensions | |
| GOST 18875 | EN-HSS chamfering turning tools. Design and dimensions | |
| GOST 18876 | EN-HSS tipped thread turning tools. Design and dimensions | |
| GOST 18877 | EN-Carbide-tipped bent bull-nose turning tools. Design and dimensions | |
| GOST 18878 | EN-Carbide-tipped straight bull-nose turning tools. Design and dimensions | |
| GOST 18879 | EN-Carbide-tipped rest bull-nose turning tools. Design and dimensions | |
| GOST 18880 | EN-Carbide-tipped bent side turning tools. Design and dimensions | |
| GOST 18881 | EN-Carbide-tipped broad-hosed finishing turning tools. Design and dimensions | |
| GOST 18882 | EN-Carbide-tipped boring and turning tools for open-end holes. Design dimensions | |
| GOST 18883 | EN-Carbide-tipped boring turning tools for blind holes. Design and dimensions | |
| GOST 18884 | EN-Carbide-tipped cutting-off turning tools. Design and dimensions | |
| GOST 18885 | EN-Carbide-tipped thread turning tools. Design and dimensions | |
| GOST 18887 | EN-H.S.S. tipped bull-nose gooseneck tools. Design and dimensions | |
| GOST 18888 | EN-H.S.S. tipped broad-nosed finishing tools. Design and dimensions | |
| GOST 18889 | EN-H.S.S. tipped undercutting straight and gooseneck tools. Design and dimensions | |
| GOST 18890 | EN-H.S.S. tipped cutting off and gooseneck squaring tools. Design and dimensions | |
| GOST 18891 | EN-Carbide tipped bull-nose planning tools. Design and dimensions | |
| GOST 18892 | EN-Carbid tipped broad-nosed finishing gooseneck tools. Design and dimensions | |
| GOST 18893 | EN-Carbid tipped undercutting planing tools. Design and dimensions | |
| GOST 18894 | EN-Carbide tipped cutting - of and gooseneck squaring tools. Design and dimensions | |
| GOST 18910 | EN-Hydraulic instruments and devices SSI. General specifications | |
| GOST 18934 | EN-Solid carbide-tipped spherical bulb-type end milling cutters for cutting hardworking steels and alloys. Design and dimensions | |
| GOST 18935 | EN-Solid carbide-tipped ellipsoidal spherical end milling cutters for cutting hardworking steels and alloys. Design and dimensions | |
| GOST 18936 | EN-Solid carbide-tipped spherical cylindrical end milling cutters for cutting hardworking steels and alloys. Design and dimensions | |
| GOST 18937 | EN-Solid carbide-tipped cylindrical end milling cutters for cutting hardworking steels and alloys. Design and dimensions | |
| GOST 18938 | EN-Solid carbide-tipped conical end milling cutters for cutting hardworking steels and alloys. Design and dimensions | |
| GOST 18939 | EN-Elongated carbide-tipped spherical bulb-type and milling cutters for cutting hardworking steels and alloys. Design and dimensions | |
| GOST 18940 | EN-Elongated carbide-tipped spherical ellipsoidal end milling cutters for cutting hardworking steels and alloys. Design and dimensions | |
| GOST 18941 | EN-Elongated carbide-tipped spherical cylindrical end milling cutters for cutting hardworking steels and alloys. Design and dimensions | |
| GOST 18942 | EN-Elongated carbide-tipped cylindrical end milling cutters for cutting hardworking steels and alloys. Design and dimensions | |
| GOST 18943 | EN-Elongated carbide-tipped conical end milling cutters for cutting hardworking steels and alloys. Design and dimensions | |
| GOST 18944 | EN-Spherical end milling cutters with carbide bits for cutting hardworking steels and alloys. Design and dimensions | |
| GOST 18945 | EN-Spherical ellipsoidal end milling cutters with carbide bits for cutting hardworking steels and alloys. Design and dimensions | |
| GOST 18946 | EN-Spherical cylindrical end milling cutters with carbide bits for cutting hardworking steels and alloys. Design and dimensions | |
| GOST 18947 | EN-Spherical conical end milling cutters with carbide bits for cutting hardworking steels and alloys. Design and dimensions | |
| GOST 18948 | EN-Cylindrical end milling cutters with carbide bits for cutting hardworking steels and alloys. Design and dimensions | |
| GOST 18949 | EN-"Carbide-tipped spherica cylindrical and conical end milling cutters for cutting hardworking steels and alloys. Technical requirements" | |
| GOST 18970 | EN-"Pressure metal working. Forging closed-die forging and stamping operations. Terms and definitions" | |
| GOST 18981 | EN-Pipe toggle wrenches. Specifications | |
| GOST 19019 | EN-Boring holders for a fastening of a prismatic cutting tool with a sorew and rod at a right angle for turret-lathes. Design and dimensions | |
| GOST 19020 | EN-Boring holders for an angled fastening of a prismatic cutting tool with a screw and rod for turret-lathes. Design and dimensions | |
| GOST 19021 | EN-Boring holders for an angled screw fastening of a cutting tool for turret-lathes. Design and dimensions | |
| GOST 19022 | EN-Holders for a fastening of a cutting tool for turret-lathes. Design and dimensions | |
| GOST 19023 | EN-Holders for an angled fastening of cutting tool for turret-lathes. Design and dimensions | |
| GOST 19042 | EN-Throw-away (indexable) inserts. Classification. Notation. Forms-Incorporating Amendment 1: 10/84; Amendment 2: 04/87; Amendment 3: 12/90 | |
| GOST 19043 | EN-Triangular throw-away (indexable) carbide cutting inserts. Design and dimensions-Incorporating Amendment 1: 10/84; Amendment 2: 12/90 | |
| GOST 19044 | EN-Triangular throw-away (indexable) carbide-cutting inserts with cylindrical holes. Design and dimensions-Incorporated Amendment 1: 10/84; Amendment 2: 12/99 | |
| GOST 19045 | EN-Triangular throw-away (indexable) carbide cutting inserts with 11 degree end-clearance angle. Design and dimensions-Incorporating Amendment 1: 10/84; Amendment 2: 12/90 | |
| GOST 19046 | EN-Triangular throw-away (indexable) carbide cutting inserts with cylindrical holes and chip-breaking flutes on one face only. Design and dimensions-Incorporating Amendment 1: 10/84; Amendment 2: 12/90 | |
| GOST 19047 | EN-Hexagon throw-away (indexable) carbide cutting inserts with 80° included angle and cylindrical holes. Design and dimensions-Incorporating Amendment 1: 12/90 | |
| GOST 19048 | EN-Hexagon throw-away (indexable) carbide cutting inserts with 80° included angle with cylindrical holes and chip-breaking flutes. Design and dimensions-Incorporating Amendment 1: 10/84; Amendment 2: 12/90 | |
| GOST 19049 | EN-Square throw-away (indexable) carbide cutting inserts. Design and dimensions-Incorporating Amendment 1: 10/84; Amendment 2: 12/90 | |
| GOST 19050 | EN-Square throw-away (indexable) carbide cutting inserts with 11° end-clearance angle. Design and dimensions-Incorporating Amendment 1: 10/84; Amendment 2: 04/87; Amendment 3: 12/90 | |
| GOST 19051 | EN-Square throw-away (indexable) carbide cutting inserts with cylindrical holes. Design and dimensions-Incorporating Amendment 1: 10/84; Amendment 2: 12/90 |