GOST Russian Language - Manufacturing Engineering Collection
This collection contains documents from the following standards organization(s): Gosudarstvennye Standarty State Standard GOST (Russian)
| GOST 18438 | EN-Notched straight-side center arbors. Design and dimensions | |
| GOST 18439 | EN-Notched straight-side center arbors with press fit of jobs. Design and dimensions | |
| GOST 18440 | EN-Noched straight side sprindle arbors. Design and dimensions | |
| GOST 18441 | EN-Intermediate rings. Design and dimensions | |
| GOST 18521 | EN-Shot shooting apparatuses. Main parameters and dimensions. Technical requirements | |
| GOST 18717 | EN-Plates for changeable sheet stamping cutting dies (blanks). Construction and dimensions | |
| GOST 18718 | EN-Guide posts for changeable sheet stamping dies. Construction and dimensions | |
| GOST 18719 | EN-Guide posts with shoulders for changeable sheet stamping dies. Construction and dimensions | |
| GOST 18732 | EN-Sections for female dies (punches). Design and dimensions | |
| GOST 18733 | EN-Stop keys. Design and dimensions | |
| GOST 18734 | EN-Scrap cutters. Design and dimensions | |
| GOST 18735 | EN-Rectangular scrap cutters. Design and dimensions | |
| GOST 18736 | EN-Overrunning stop cutting blades. Design and dimensions | |
| GOST 18737 | EN-Overrunning stop cutting blades with lugs. Design and dimensions | |
| GOST 18738 | EN-Stops for overrunning stop cutting blades. Design and dimensions | |
| GOST 18740 | EN-Cylindrical stops. Design and dimensions | |
| GOST 18741 | EN-Expendable stops with a nest for spring. Design and dimensions | |
| GOST 18742 | EN-Expendable stops. Design and dimensions | |
| GOST 18743 | EN-Mushroom-shaped stops. Design and dimensions | |
| GOST 18744 | EN-Revelled stops. Design and dimensions | |
| GOST 18745 | EN-Hook stops. Design and dimensions | |
| GOST 18746 | EN-Backing dowel pins. Design and dimensions | |
| GOST 18747 | EN-Stepped countersunk stops. Design and dimensions | |
| GOST 18748 | EN-Stepped countersunk stops with a plate. Design and dimensions | |
| GOST 18750 | EN-Countersunk stops with a twist spring hole. Design and dimensions | |
| GOST 18751 | EN-Twist springs for stops. Design and dimensions | |
| GOST 18752 | EN-Stops with chamfer and notch for spring. Design and dimensions | |
| GOST 18753 | EN-Blade spring for stops with chamfer. Design and dimensions | |
| GOST 18754 | EN-Stops with chamfer and flat. Design and dimensions | |
| GOST 18755 | EN-Wire stops. Design and dimensions | |
| GOST 18756 | EN-Stops for turned back strip fixing. Design and dimensions | |
| GOST 18757 | EN-Composite stops for turned back strip fixing. Design and dimensions | |
| GOST 18758 | EN-Blank holders. Design and dimensions | |
| GOST 18759 | EN-Roll holders. Design and dimensions | |
| GOST 18760 | EN-Rollers for blank holders. Design and dimensions | |
| GOST 18761 | EN-Cylindrical blank holders. Design and dimensions | |
| GOST 18762 | EN-Slide blocks for cylinder holders. Design and dimensions | |
| GOST 18763 | EN-Block blank holders. Design and dimensions | |
| GOST 18764 | EN-Blade springs for block blank holders. Design and dimensions | |
| GOST 18765 | EN-Spring blank holders. Design and dimensions | |
| GOST 18767 | EN-Holding down devices. Design and dimensions | |
| GOST 18768 | EN-Supporting strips. Design and dimensions | |
| GOST 18769 | EN-Rod locators. Design and dimensions | |
| GOST 18770 | EN-Locators with threaded bore. Design and dimensions | |
| GOST 18771 | EN-Locators with a stepped bore. Design and dimensions | |
| GOST 18773 | EN-Extended rod locators. Design and dimensions | |
| GOST 18775 | EN-Reinforced locators. Design and dimensions | |
| GOST 18776 | EN-Mushroom-shaped locators. Design and dimensions | |
| GOST 18777 | EN-Round cross-bars. Design and dimensions | |
| GOST 18778 | EN-Three-support cross-bars. Design and dimensions | |
| GOST 18779 | EN-Four-support cross-bars. Design and dimensions | |
| GOST 18780 | EN-Puchers. Design and dimensions | |
| GOST 18782 | EN-Pins for pushers. Design and dimensions | |
| GOST 18783 | EN-Guide bushes for pushers. Design and dimensions | |
| GOST 18784 | EN-Mushroom-shaped pushers. Design and dimensions | |
| GOST 18785 | EN-Composite mushroom-shaped pushers. Design and dimensions | |
| GOST 18786 | EN-Female shouldered screws. Design and dimensions | |
| GOST 18787 | EN-Splined stepped screws. Design and dimensions | |
| GOST 18788 | EN-Extensions for shouldered screws. Design and dimensions | |
| GOST 18789 | EN-Limiting sleeves. Design and dimensions | |
| GOST 18790 | EN-Limiting clamps. Design and dimensions | |
| GOST 18791 | EN-Limit switches for ejectors. Design and dimensions | |
| GOST 18792 | EN-Locking washers for ejector limit switches. Design and dimensions | |
| GOST 18793 | EN-Compression springs. Design and dimensions | |
| GOST 18794 | EN-Tension springs. Design and dimensions | |
| GOST 18795 | EN-Bushes for spring packs. Design and dimensions | |
| GOST 18796 | EN-Nuts for spring packs. Design and dimensions | |
| GOST 18797 | EN-Guided nuts for spring packs. Design and dimensions | |
| GOST 18798 | EN-Pins for springs. Design and dimensions | |
| GOST 18799 | EN-Packs of springs. Design and dimensions | |
| GOST 18800 | EN-Threaded rods for packs of disc springs. Design and dimensions | |
| GOST 18801 | EN-Nuts for packs of disc springs. Design and dimensions | |
| GOST 18802 | EN-Bush stops. Design and dimensions | |
| GOST 18803 | EN-Cilindrical eatchers. Design and dimensions | |
| GOST 18805 | EN-Square eatchers. Design and dimensions | |
| GOST 18807 | EN-Stepped stops. Design and dimensions | |
| GOST 18808 | EN-Guide plates. Design and dimensions | |
| GOST 18809 | EN-Chamfered guide plates. Design and dimensions | |
| GOST 18810 | EN-Chamfered guide plates with threaded bores. Design and dimensions |