GOST English Translations - Mechanical Systems and Components for General Use Collection
This collection contains documents from the following standards organization(s): Gosudarstvennye Standarty State Standard GOST (Russian) 1 2 > >
| GOST 10300 | EN-COUNTERSUNK-HEAD RIVETS OF ACCURACY CLASSES B and C SPECIFICATIONS-Incorporates Amendments 1: 4/1985 and 2: 6/1900; CMEA Standard 1020-78 | |
| GOST 10304 | EN-Rivets classes B and C. General specifications | |
| GOST 10450 | EN-DIMINISHED WASHERS OF CLASSES ACCURACY A and C Specifications-Incorporating Amendment 1: 11/1983; Amendment 2: 03/1988 | |
| GOST 10618 | EN-Thread forming screws for metals and plastics. General specifications | |
| GOST 10851 | EN-Friction articles of retinax. Specifications | |
| GOST 11371 | EN-Washers - Specifications-Incorporates Amendment 1: 11/1983 Amendment 2: 05/1988 and Amendment 3: 05/1990 | |
| GOST 1147 | EN-Wood screws. General specifications | |
| GOST 11709 | EN-Basic Norms of Interchangeability METRIC THREAD FOR PLASTIC PARTS | |
| GOST 11738 | EN-HEXAGON SOCKET HEAD CAP SCREWS OF ACCURACY CLASS A DESIGN AND DIMENSIONS-Incorporates Amendment 1: 03/1989 | |
| GOST 1198 | EN-Asbestos brake bands. Specifications | |
| GOST 12.2.086 | EN-"Occupational safety standards system. Positive-displacement hydraulic drives and lubricating systems. General safety requirements for mounting testing and maintenance" | |
| GOST 12081 | EN-CONICAL SHAFT ENDS WITH 1:10 TAPER BASIC DIMENSIONS PERMISSIBLE TORQUES-Incorporates Amendments 1: 1/1976 and 2: 11/1979 and 3: 6/1989; CMEA Standard 537-77 | |
| GOST 12619 | EN-FLANGED CONICAL BOTTOMS WITH APEX ANGLES OF 60 and 90 Degrees Basic Dimensions-Incorporating Amendment 1: 10/1983 | |
| GOST 12620 | EN-CONICAL UNBEADED BOTTOMS WITH AN APEX ANGLE OF 60 90 and 120 Degrees. Basic dimensions-Incorporating Amendment 1: 10/1983 | |
| GOST 12621 | EN-CONICAL UNBEADED BOTTOMS WITH APEX ANGLE OF 140 DEGREES Basic dimensions-Incorporating Amendment 1: 10/1983 | |
| GOST 12622 | EN-FLAT BEADED BOTTOMS Basic dimensions-Incorporating Amendment 1: 10/1983 | |
| GOST 12623 | EN-FLAT UNBEADED BOTTOMS Basic dimensions-Incorporating Amendment 1: 10/1983 | |
| GOST 1284.1 | EN-DRIVING V-BELTS OF STANDARD CROSS-SECTIONS BASIC DIMENSIONS AND INSPECTION METHODS-Incorporating Amendment 1: 12/1991 | |
| GOST 1284.2 | EN-V-BELTS OF STANDARD CROSS - SECTIONS SPECIFICATIONS-Incorporating Amendment 1: 12/1991; Amendment 2: 9/1999; Amendment 3: 7/2003 | |
| GOST 1284.3 | EN-DRIVING V-BELTS OF STANDARD CROSS-SECTIONS TRANSMITTED POWERS | |
| GOST 12856 | EN-Asbestos-steel sheets and gaskets. Specifications | |
| GOST 12969 | EN-Plates for machines and devices. Technical requirements | |
| GOST 12971 | EN-Restangular plates for machines and devices. Dimensions-Amendment 1: 09 1983; Amendment 2: 041986 | |
| GOST 12996 | EN-Pulling fork chains. Specifications | |
| GOST 13755 | EN-BASIC NORMS OF INTERCHANGEABILITY CYLINDRICAL INVOLUTE GEARINGS BASIC RACK PROFILE | |
| GOST 14034 | EN-Centre holes. Dimensions-Amendment 1: 12/1978; Amendment 2: 04/1981 | |
| GOST 14801 | EN-Flat-head rivets (high precision). Construction and dimensions | |
| GOST 14803 | EN-Rivets (high precision). General specifications | |
| GOST 1482 | EN-SQUARE-HEAD DOG-POINT SET SCREWS. PRODUCT GRADES A AND B Design and dimensions-Incorporating Amendment 1: July 1987 | |
| GOST 1491 | EN-SCREWS WITH CYLINDRICAL CAP OF ACCURACY CLASSES A AND B Design and dimensions-(CMEA Standard 2653-80); Incorporates Amendment 1 and 2: 121981; | |
| GOST 15150 | EN-Machines instruments and other industrial products. Modification for different climatic regions. Categories operating storage and transportation conditions as to environment climatic aspects influence-(CMEA Standa | |
| GOST 15150 AMD 4 | EN-Machines instruments and other industrial products. Modification for different climatic regions. Categories operating storage and transportation conditions as to environment climatic aspects influence | |
| GOST 15960 | EN-Friction flexible asbestos materials and products of them. Specifications | |
| GOST 16093 | EN-Basic Norms of Interchangeability METRIC SCREW THREADS Tolerances. Clearance Fits-Corrigendum: 2005; Same as ISO 965-1:1998 and ISO 965-3:1998 | |
| GOST 16118 | EN-COMPRESSION (EXTENSION) CYLINDRICAL HELICAL SPRINGS MADE OF ROUND STEEL SPECIFICATIONS-Includes Amendment 1:05/1984 | |
| GOST 17473 | EN-Half-rounded head screws of accuracy classes A and B. Design and dimensions-Incorporates Amendment 1: 121981; Amendment 2: 41986 | |
| GOST 17475 | EN-Countersunk head screws of accuracy classes A and B. Design and dimensions-Incorporates Amendment 1: 121981; Amendment 2: 041986 | |
| GOST 1759.0 | EN-"Boltsscrewsstuds and nuts. Specifications"-(CMEA Standard 4203-83); Incorporates Amendment 1: 101989 | |
| GOST 1759.1 | EN-"Bolts screws studs and tuts. Tolerances. Control methods of dimensions and deviations of form and surface position" | |
| GOST 1759.2 | EN-Bolts screws and studs. Surface defects and methods of control | |
| GOST 1759.3 | EN-Nuts. Surface defects and methods of control | |
| GOST 1759.4 | EN-BOLTS SCREWS AND STUDS MECHANICAL PROPERTIES AND TEST METHODS-ISO 898:1-1978 | |
| GOST 1786 | EN-Friction linings. General requirements | |
| GOST 18123 | EN-Washers. General specification | |
| GOST 19036 | EN-Cylindrical worm gear pairs. Basic worm and basic generating worm | |
| GOST 191 | EN-Block load chains. Specifications | |
| GOST 19672 | EN-WORM MODULES AND DIAMETER COEFFICIENTS-Amendment 1: 06/1978; Amendment 2: 01/01/1991 | |
| GOST 20700 | EN-BOLTS STUDS NUTS AND WASHERS FOR FLANGED AND ANCHOR JOINTS PLUGS AND YOKES WITH A MEDIUM TEMPERATURE FROM 0 TO 650 ºC SPECIFICATIONS-Incorporates Amendments 1: 6/1980 and 2: 12/1985 and 3: 3/1987; Incorporates Co | |
| GOST 21574 | EN-Electromagnetic clutches with magnetic-flux-conducting discs. Technical requirements and methods of testing | |
| GOST 21834 | EN-High precision heavy duty trahsmission roller chains. Specifications | |
| GOST 22061 | EN-MACHINES AND TECHNOLOGICAL EQUIPMENT. SYSTEM OF BALANCE ACCURACY CLASSES BASIC PROVISIONS-AMD 1: 01/1983 | |
| GOST 22356 | EN-High strength bolts and nuts and washers. General technical requirements | |
| GOST 22976 | EN-Hydraulic and pneumatic power drives and lubricating systems. Acceptance | |
| GOST 23540 | EN-Balance leaf chains with solid pins. Specifications | |
| GOST 24037 | EN-ASBESTOS-POLYMERIC SEALING SHEET MATERIALS METHOD OF DETERMINATION OF RESISTANCE TO LIQUIDS EFFECT-CMEA Standard 1220-78 | |
| GOST 24038 | EN-ASBESTOS-POLYMERIC SEALING SHEET MATERIALS COMPRESSIBILITY AND RECOVERABILITY TEST | |
| GOST 24039 | EN-ASBESTOS-POLYMERIC SEALING SHEET MATERIALS METHOD OF DIMENSIONS AND DENSITY MEASUREMENT-(CMEA Standard 1222-78); Incorporates Amendment 1:9/1986 and Amendment 2: 7/1991 | |
| GOST 24379.0 | EN-FOUNDATION BOLTS. GENERAL TECHNICAL SPECIFICATIONS | |
| GOST 24379.1 | EN-Foundation bolts. Design and dimensions | |
| GOST 24444 | EN-TECHNOLOGICAL EQUIPMENT GENERAL REQUIREMENTS FOR ASSEMBLY ADAPTABILITY | |
| GOST 24848.2 | EN-Variator V-belts for industrial equipment. Specifications | |
| GOST 25106 | EN-Plain bearings split bearing blocks and pllgsw-blocks. Technical requiresents | |
| GOST 2524 | EN-HEXAGON NUTS WITH REDUCED ACROSS FLATS WIDTH OF ACCURACY CLASS A Design and Dimensions-Incorporating Amendment 2: 02/1974 Amendment 3: 03/1981 Amendment 4: 06/1983 Amendment 5: 05/1985; Amendment 6: 03/1989; Amen | |
| GOST 2526 | EN-THIN HEXAGON NUTS WITH DECREASED SIZE ACROSS FLATS OF ACCURACY CLASS A. Design and Dimensions | |
| GOST 25347 | EN-Basic Norms of Interchangeability UNIFIED SYSTEM OF TOLERANCES AND FITS Tolerance Ranges and Recommended Fits-Amendment 1: 10/1989 | |
| GOST 26875 | EN-Vibration. Portable balancing equipment. Technical requirements | |
| GOST 27.002 | EN-RELIABILITY IN ENGINEERING MAIN CONCEPTS. TERMS AND DEFINITIONS | |
| GOST 27.003 | EN-Engineering Product Reliability CONTENTS AND GENERAL RULES FOR ESTABLISHMENT OF RELIABILITY REQUIREMENTS | |
| GOST 27.202 | EN-Reliability in Engineering TECHNOLOGICAL SYSTEMS Methods of reliability evaluation using product quality parameters | |
| GOST 27164 | EN-Special instrumentation for operational monitoring bearing vibration in large stationary aggregates. Technical requirements | |
| GOST 27286 | EN-Power friction clutches with electromagnetic shifting. General specifications and test methods | |
| GOST 27672 | EN-"Plain bearings. Wrapped bushes. Dimensions tolerances and methods of checking" | |
| GOST 28487 | EN-Tool-joint tapered thread for drill string elements. Profile. Dimensions. Tolerances | |
| GOST 28848 | EN-PLAIN WASHERS. EXTRA LARGE SERRIES PRODUCT GRADE C | |
| GOST 28988 | EN-"Fluid power systems. Vibration characteristics vibration tests" | |
| GOST 30224 | EN-NOVIKOV CYLINDRICAL GEARING WITH TEETH SURFACE HARDNESS OF NO LESS THAN 35 HRCý | |
| GOST 3675 | EN-BASIC INTERCHANGEABILITY NORMS CYLINDRICAL WORM GEARS TOLERANCES-CMEA Standard 311-76 and CMEA Standard 1162-78 | |
| GOST 397 | EN-Splints. Technical conditions | |
| GOST 588 | EN-Pulling block chains |
1 2 > >