GOST English Translations - Manufacturing Engineering Collection
This collection contains documents from the following standards organization(s): Gosudarstvennye Standarty State Standard GOST (Russian) 1 2 3 4 > >
| GOST 10052 | EN-Metal covered electrodes for manual arc welding of high-alloyed steel with special properties. Types | |
| GOST 10054 | EN-Waterproof abrasive paper. Specifications | |
| GOST 10083 | EN-Taper reamers . Technical requirements | |
| GOST 10110 | EN-DIAMOND SAWS 1A1R SPECIFICATIONS-(CMEA Standard 5906-87) | |
| GOST 10111 | EN-Diamond tools of glass cutter | |
| GOST 10331 | EN-Fine-module finishing start hobbing cutters for cylindrical involute gears. Specifications | |
| GOST 1077 | EN-"Uniflame blowpipes for oxyacetylene welding brazing and preheating. Basic parameters and dimensions and general technical requirements" | |
| GOST 10772 | EN-Water foundry coatings for mould paints. General specifications | |
| GOST 10796 | EN-Arc-air hand torches. Types and basic parameters | |
| GOST 11533 | EN-AUTOMATIC AND SEMI-AUTOMATIC SUBMERGED ARC WELDING ACUTE AND OBTUSE WELD JOINTS MAIN TYPES DESIGN ELEMENTS AND DIMENSIONS | |
| GOST 11534 | EN-MANUAL ARC WELDING. ACUTE- AND OBTUSE-ANGLE WELD JOINTS. MAIN TYPES STRUCTURAL ELEMENTS AND DIMENSIONS | |
| GOST 11799 | EN-LONG VENT NEEDLES Design-Incorporating Amendment 1: 8/1980; Amendment 2: 6/1985; Amendment 3: 5/1992 | |
| GOST 1184 | EN-Woodworking chisels and jouges | |
| GOST 1185 | EN-Carpenters and joiner chisels | |
| GOST 11881 | EN-"Controllers acting without an independent energy source SSI. General specifications" | |
| GOST 11930.1 | EN-SURFACING MATERIALS CARBON DETERMINATION METHODS-Incorporating Amendment 1: December 1984; Amendment 2: December 1989 | |
| GOST 11930.8 | EN-HARD-FACING MATERIALS METHOD FOR PHOSPHORUS DERERMINATION-Incorporating Amendment 1: December 1984; Amendment 2: December 1989 | |
| GOST 11964 | EN-Technical cast iron and steel shot. Common technical requirements | |
| GOST 11969 | EN-FUSION WELDING BASIC POSITIONS AND THEIR DESIGNATIONS-Incorporating Amendment 1: 5/1982 | |
| GOST 12.1.035 | EN-Occupational safety standards system. Equipment for arc and resistance electric welding. Admissible noise levels and methods of measurement | |
| GOST 12.2.007.10 | EN-Occupational Safety Standards System INDUCTION PLANTS GENERATORS AND HEATERS FOR ELECTROTHERMICS ULTRASONIC PLANTS AND GENERATORS Safety requirements | |
| GOST 12.2.007.8 | EN-Occupational safety standards system DEVICES FOR ELECTRIC WELDING AND PLASMA TREATMENT Safety requirements-Incorporating Amendment 1: 12/1980; Amendment 2: 5/1985 | |
| GOST 12.2.007.9 | EN-Safety in electroheat installations. Part 1. General requirements | |
| GOST 12.2.008 | EN-Labour safety standards system. Equipment and apparatus for gas-flaming processing of metals and for thermal dusting of coatings. Safety requirements | |
| GOST 12.2.010 | EN-Occupational Safety Standards System PNEUMATIC HAND MACHINES General safety requirements-Incorporating Amendment 1: 02/1982; Amendment 2: 11/1986; Amendment 3: 02/1992 | |
| GOST 12.2.013.0 | EN-Occupational safety standards system. Electric hand-held tools. General safety requirements and testing methods | |
| GOST 12.2.017.2 | EN-Occupational safety standards system. Hammers. Safety requirements | |
| GOST 12.2.017.3 | EN-Occupational safety standards system. Straightening machines. Safety requirements | |
| GOST 12.2.017.4 | EN-Occupational safety standards system. Sheet-bending presses. Safety requirements | |
| GOST 12.2.029 | EN-Occupational safety standarts system. Machine tool devices. Safety requirements | |
| GOST 12.2.046.0 | EN-System of labour safety standards. Technological foundry equipment. Safety requirements | |
| GOST 12.2.052 | EN-OCCUPATIONAL SAFETY STANDARDS SYSTEM - EQUIPMENT OPERATING WITH GASEOUS OXYGEN - GENERAL SAFETY REQUIREMENTS-Incorporating Amendment 1: 03/1987 | |
| GOST 12.2.054 | EN-Occupational safety standards system. Acetilene installations. Safety requirements | |
| GOST 12.2.054.1 | EN-Occupational safety standards system. Acetylene installations. Acceptance and test methods | |
| GOST 12.2.060 | EN-Occupational safety standards system. Acetulene pipelines. Safety requirements | |
| GOST 12.2.064 | EN-Occupational safety standards system. Controls of industrial equipments. General safety requirements | |
| GOST 12.2.109 | EN-Occupational safety standards system. Sheet stamping dies. General safety requirements | |
| GOST 12.2.113 | EN-Occupational safety standards system. Crank presses. Safety requirements-Incorporating Amendment 1: 8/1987 Corrigendum: 1987 | |
| GOST 12.2.114 | EN-Occupational safety standards system. Serew process. Safety requirements | |
| GOST 12.2.117 | EN-Occupational safety standards system. Hydraulic presses. Safety requirements | |
| GOST 12.2.118 | EN-System of safety standards. Shears. Safety requirements-Incorporating Amendment 1: 3/1991 Corrigendum: 1991 | |
| GOST 12.2.131 | EN-Occupational safety standards system. Forging machines. Safety requirements | |
| GOST 12.3.003 | EN-OCCUPATIONAL SAFETY STANDARDS SYSTEM ELECTRIC WELDING OPERATIONS SAFETY REQUIREMENTS-Incorporating Amendment 1: 05/1989 | |
| GOST 12.3.004 | EN-Occupational Safety Standards System HEAT TREATMENT OF METALS General Safety Requirements-Incorporating Amendment 1: 8/1982 | |
| GOST 12.3.008 | EN-Occupational safety standards system. Metal and non-metal inorganic coating. General safety requirements | |
| GOST 12.3.027 | EN-Occupational safety standards system. Foundry work. Safety requirements | |
| GOST 12.3.028 | EN-Occupational safety standards system. Abrasive and elbor instruments. Safety requirements | |
| GOST 12221 | EN-Apparatus for plasma-arc cutting of metals. Types and basic parameters | |
| GOST 12633 | EN-Pneumatic rotary tools. General specifications | |
| GOST 12946 | EN-HANGER COLLAR NUTS FOR MACHINE RETAINING DEVICES Design-Incorporating Amendment 1: 06/1980 and Amendment 2: 03/1988 | |
| GOST 12997 | EN-State system of industrial devices and means of automatization. General technical requirements | |
| GOST 13033 | EN-SSI. Electrical analogue instruments and devices of automatization. General specification | |
| GOST 13053 | EN-Pneumatic instruments and devices SSI. General specification | |
| GOST 13130 | EN-Post press tool sets for cold plastic working. Technical requirements | |
| GOST 13152 | EN-MACHINING FACILITIES BOLTS FOR MACHINE SLOTS-Incorporating Amendment 1: 6/1980; Amendment 2: 3/1988 and Amendment 3: 5/1989 | |
| GOST 13215 | EN-Thrust centres and semicentres. Technical requirements | |
| GOST 13297 | EN-Diamond cutting tools and inserts. Technical reqirements | |
| GOST 13418 | EN-Facilities of automation and instruments electric discrete SSI. General specifications | |
| GOST 13438 | EN-SPHERICAL WASHERS FOR MACHINE RETAINING DEVICES DESIGN-Incorporating Amendment 1: 6/1980; Amendment 2: 5/1989; Amendment 3: 12/1989 | |
| GOST 13838 | EN-Fine pitch involute gear cutters. Specifications | |
| GOST 13861 | EN-Regulators for gasflame working. General specifications | |
| GOST 14177 | EN-Spindles with built-in drive. General specifications | |
| GOST 1465 | EN-Files. Specifications | |
| GOST 14651 | EN-Electrode holders for manual arc welding. Specifications | |
| GOST 14753 | EN-Indicating and recording pneumatic control instruments SSI. General specifications | |
| GOST 14782 | EN-Nondestructive testing. Welded joints. Ultrasonic methods | |
| GOST 14806 | EN-ARC WELDING OF ALUMINUM AND ALUMINUM ALLOYS IN INERT GASES. WELDED JOINTS BASIC TYPES DESIGN ELEMENTS AND DIMENSIONS-Incorporates Amendment 1: 10/1989 | |
| GOST 14953 | EN-Taper countersinks. Specifications | |
| GOST 15127 | EN-Solid generating hobs for sprochets of transmission roller and bush chains. Specifications | |
| GOST 1523 | EN-Cylindrical reamers. Technical requirements | |
| GOST 15506 | EN-All-cast moulding boxes of aluminium and magnesium alloys. Technical requirements | |
| GOST 15595 | EN-Foundry equipment. Die casting machines. General specifications | |
| GOST 15863 | EN-Plate blanks of die sets for sheet stamping for dividing operations. Technical requirements | |
| GOST 16037 | EN-"Welded joints in steel pipelines. Main types design elements and dimensions" | |
| GOST 16098 | EN-WELDED JOINTS MADE OF CLAD CORROSION-RESISTANT STEEL Basic Types Design Elements and Dimensions-Incorporating Amendment 1: 02/1989 | |
| GOST 16115 | EN-Diamond segment cut-off wheels forms 1A1RSS/C1 and 1A1RSS/C2. Specifications | |
| GOST 16181 | EN-Diamond grinding wheels. Specifications | |
| GOST 16225 | EN-END MILLING CUTTERS FOR LIGHT ALLOYS PROCESSING Design and dimensions-Incorporating Amendment 1: 1988 | |
| GOST 16253 | EN-Chill moulds. Screwed core removers. Construction and dimensions |
1 2 3 4 > >