GOST English Translations - Fluid Systems and Components for General Use Collection
This collection contains documents from the following standards organization(s): Gosudarstvennye Standarty State Standard GOST (Russian) 1 2 3 > >
| GOST 10493 | EN-Rigin and compensating lens-shaped seals for pn20-100 mpa (200-1000 kgf/cm2). Technical specifications | |
| GOST 10495 | EN-HEXAGON NUTS FOR FLANGE JOINTS FOR PN ABOVE 10 TO 100 MPa (ABOVE 100 TO 1000 kgf/cm2). SPECIFICATIONS | |
| GOST 10498 | EN-Especially thin-walled seamless tubes from corrosion-resistant steel. Specifications | |
| GOST 10578 | EN-DIESEL ENGINE FUEL PUMPS GENERAL SPECIFICATIONS | |
| GOST 10616 | EN-Radial and axial fans. Dimensions and parameters | |
| GOST 10654 | EN-GAGES FOR TRIANGULAR THREAD OF TUBING PIPES WITH COUPLINGS TYPES. BASIC DIMENSIONS AND TOLERANCES | |
| GOST 10704 | EN-ELECTRIC LINE WELDED STEEL TUBES RANGE OF SIZES | |
| GOST 10705 | EN-ELECTRICALLY WELDED STEEL PIPES SPECIFICATIONS-Incorporating Amendment 1: 12/1986; Amendment 2: 12/1987; Amendment 3: 6/1989; Amendment 4: 7/1991 | |
| GOST 10706 | EN-METAL PIPES AND FITTINGS Part 3 Welded Pipes. Profile Pipes-Incorporating Amendment 1: 7/1980 Amendment 2: 12/1985 Amendment 3: 11/1990 and Amendment 4: 4/1999 | |
| GOST 11017 | EN-Steel seamless tubes for high pressure service. Specifications | |
| GOST 11068 | EN-ELECTRIC-WELDED PIPES MADE FROM CORROSION-RESISTANT STEEL SPECIFICATIONS-Incorporates Amendment 1: June 1987; Amendment 2: April 1999; Corrigendum: 2005 | |
| GOST 11249 | EN-Steel rolled up soldered double-layer tubes. Specifications | |
| GOST 11383 | EN-Thin-walled copper and brass tubes. Specifications | |
| GOST 11442 | EN-General-purpose asxial fans. General specification | |
| GOST 11823 | EN-Lift check values for Pnom < or = 25 MPA (250 KGF/SM2). General specifications | |
| GOST 12.2.016 | EN-Occupational safety standards system. Gas compressing equipment. General safety requirements | |
| GOST 12.2.016.1 | EN-Occurational safety standards system. Compressing equipment. Determination of noise characteristics. General requirments | |
| GOST 12.2.016.2 | EN-Occupational safety standards system. CoMpression equipment. Noise characteristics determination method of stationary compressor sets | |
| GOST 12.2.016.3 | EN-Occupational safety standards system. Compressing equipment. Determination method of noise characteristics of mobile compressor stations | |
| GOST 12.2.016.4 | EN-Occupational safety standards system. Compressing equipment. Determination method of noise characteristics of stationary compressor stations and installations | |
| GOST 12.2.016.5 | EN-"Occupational safety standards system. Compressing equipment. Noise characteristics and antinoise protection. Lay-out ( composition formulation contents ) of technical documentation" | |
| GOST 12.2.028 | EN-Occupational safety standards system. Ventilators for general purposes. Methods for determination of noise characteristics | |
| GOST 12.2.063 | EN-Occupational safety standards system. Industrial pipeline valves. General safety requirements | |
| GOST 12.2.085 | EN-Vessels Operating under Pressure SAFETY VALVES Safety Requirements | |
| GOST 12.2.086 | EN-"Occupational safety standards system. Positive-displacement hydraulic drives and lubricating systems. General safety requirements for mounting testing and maintenance" | |
| GOST 12.2.110 | EN-Occupational safety standards systems. General-purpose stationary air piston compressors. Norms and methods for determination of noise characteristics | |
| GOST 1208 | EN-Pressed bronze tubes. Specifications | |
| GOST 12124 | EN-CENTRIFUGAL OIL PUMPS FOR MAIN PIPELINES TYPES AND KEY PARAMETERS | |
| GOST 12247 | EN-LARGE-VOLUME SEAMLESS STEEL GAS CYLINDERS FOR OPERATING PRESSURE OF 31.4 and 39.2 MPa (320 and 400 kgf/cm2) SPECIFICATIONS-Incorporating Amendment 1: February 1987; Amendment 2: June 1991; Corrigendum: 2002 | |
| GOST 12586.0 | EN-Reinforced-concrete vibrohydropressed pressure pipes | |
| GOST 12586.1 | EN-Reinforced concrete vibrohydropressed pressure pipes. Design and dimensions | |
| GOST 12815 | EN-FLANGES FOR FITTINGS AND PIPELINES for Pnom from 0.1 to 20.0 Mpa (from 1 to 200 kgf/cm2)-Amendment 1: 03/1983; Amendment 2: 12/1983; Amendment 3: 12/1987; Amendment 4: 09/1989; Amendment 5: 04/1992; Incorporated Corr | |
| GOST 12816 | EN-"Flanges for valves fittings and pipelines for Pnom from 01 to 20 MPa (from 1 to 200 kgf/cm2)/ General technical requirements" | |
| GOST 12817 | EN-CAST FLANGES MADE FROM GREY IRON for Pnom from 01 to 16 MPa (from 1 to 16 kgf/cm2) Design and dimensions-Incorporating Amendments 1: 12/1987; Amendments 2: 04/1992 | |
| GOST 12818 | EN-CAST FLANGES MADE FROM MALLEABLE CAST IRON FOR Pv from 1.6 to 4.0 MPa (from 16 to 40 kgf/cm2) Design and dimensions-Incorporates Amendment 1: 1988 and Amendment 2: 1992 | |
| GOST 12819 | EN-CAST STEEL FLANGES FOR pv from 1.6 to 20.0 MPa (from 16 to 200 kgf/cm2)-Incorporates Amendment 1:1988 and Amendment 2: 1992 | |
| GOST 12821 | EN-"Steel butt-welded flanges for Pnom from 01 to 20 MPa (from 1 to 200 kgf/cm2). Design and dimensions" | |
| GOST 12893 | EN-Single-seated and double-seated control valves. General technical reguirements-Incorporating Amendment 1: 3/1990 | |
| GOST 13529 | EN-SELF-ACTING INDIVIDUAL CIRCULAR VALVES FOR PISTON COMPRESSORS TYPES AND FITTING DIMENSIONS | |
| GOST 13547 | EN-"Butterfly wicket valves for Pnom to 25 MPa (25 kgf/cm2). General specifications" | |
| GOST 13548 | EN-Thin-walled tubes of nickel and nickel alloys. Specifications | |
| GOST 13663 | EN-Shaped steel tubes. Technical requirements | |
| GOST 14162 | EN-Steel tubes of small dimensions (capillary). Specifications | |
| GOST 14202 | EN-PIPELINES OF INDUSTRIAL ENTERPRISES IDENTIFICATION COLORATION WARNING SIGNS AND MARKING PLATES | |
| GOST 14658 | EN-Positive-displacement pumps for hydraulic drives. Acceptance rules and methods of testing | |
| GOST 15040 | EN-Oxygen-free copper pipes. Specifications | |
| GOST 15608 | EN-Pneumatic piston cylinders. Specifications | |
| GOST 15860 | EN-"Steel welded cylinders for liquefied hydrocarbon gases at pressure up to 16 MPa. Specifications" | |
| GOST 16514 | EN-Fluid power drives HYDRAULIC CYLINDERS General technical requirements | |
| GOST 16515 | EN-Positive-displacement hydraulic drives and lubricating systems. Filters and filter elements. General technical requirements | |
| GOST 16769 | EN-Hydraulic accumulators. General technical requirements | |
| GOST 16774 | EN-Copper tubes of rectangular and square section. Specifications | |
| GOST 17008 | EN-Khladon hermetic compressors. General specifications | |
| GOST 17217 | EN-Tubes of copper-nickel alloy MNZh5-1. Specifications | |
| GOST 17335 | EN-Positive-displacement pumps. Acceptance rules and test methods | |
| GOST 17375 | EN-CARBON AND LOW-ALLOYED STEEL SEAMLESS WELDED FITTINGS SHARPLY CURVED BENDS OF TYPE 3D (R - 1.5 DN) Design-Incorporated Amendment 1: 2001 | |
| GOST 17376 | EN-CARBON AND LOW-ALLOYED STEEL SEAMLESS WELDED FITTINGS TEES Design-Incorporating Amendment 1: 2001 | |
| GOST 17378 | EN-CARBON AND LOW-ALLOYED STEEL SEAMLESS WELDED FITTINGS REDUCERS Design-Incorporating Amendment 1: 2001 | |
| GOST 17398 | EN-PUMPS TERMS AND DEFINITIONS | |
| GOST 17410 | EN-Nondestructive inspection METAL SEAMLESS CYLINDRICAL PIPES Ultrasonic Flaw Detection Methods-Incorporating Amendment 1: 06/1984 and Amendment 2: 06/1988 | |
| GOST 17411 | EN-Positive-displacement hydraulic drives. General technical requirements | |
| GOST 18460 | EN-Pneumatic drives. General technical requirements | |
| GOST 18475 | EN-Aluminium and aluminium alloy cold-rolled tubes. Specifications | |
| GOST 18517 | EN-Garage compressors. General specifications | |
| GOST 18599 | EN-POLYETHYLENE PRESSURE PIPES Specifications-Incorporates Corrigendum: 2002 and Includes Amendment 1: 2006 | |
| GOST 19040 | EN-METAL PIPES Test method for tension at a high temperature-Incorporating Amendment 1: 10/1987 | |
| GOST 19530 | EN-SEALING DEVICES OF SCREW JOINTS WITH ROUND CROSS-SECTION RUBBER RINGS. SCREW PART-Incoporated Amendment 1: 10/1980 and Amendment 2: 09/1985 | |
| GOST 20245 | EN-Hydraulic valves. Acceptance and ethods of tests | |
| GOST 20719 | EN-Hydraulic motors. Acceptance and methods of tests | |
| GOST 20791 | EN-Electrically centrifugal glandless pumps. General specifications | |
| GOST 20900 | EN-Copper tubing for waveguides and brass right angle tubes | |
| GOST 21251 | EN-Pneumatic directional control valves spool type with 5 ports for pn=10 bar | |
| GOST 21324 | EN-Air check valves for pn= 10 bar | |
| GOST 21345 | EN-Lifting-plug ball and cylindrical cocks for Pnom to<=25 MPa (250 kgf/sq sm). General specifications-Incorporating Amendment 1: 2/1984 Amendment 2: 2/1987 Amendment 3: 4/1990 | |
| GOST 21646 | EN-COPPER AND BRASS PIPES FOR HEATEXCHANGE APPARATUS Specifications | |
| GOST 21729 | EN-Cold-deformed and hot-deformed structural carbon and alloyed steel tubes. Specifications | |
| GOST 21804 | EN-"Shut-off devices for cylinders with liquated gas of pressur 16 MPaGeneral specificatios" | |
| GOST 21805 | EN-"Pressure regulators for liquated gas of pressure 16 MPa. General specifications" | |
| GOST 21945 | EN-Seamless hot-rolled tubes from alloys based on titanium. Specifications |
1 2 3 > >