IHS Home PageIHS

Industry Standards & Regulations

Print Page Email Page Smaller Text Larger Text

GME and GMI Road Test Procedures Chassis Collection

This collection contains documents from the following standards organization(s): General Motors Europe 1  2   > >  

GME GME R-10B-10 EN-Tread Noises-English/German 
GME GME R-10B-11 EN-Tyre Tread Noise (Subjective Evaluation)-English/German; This specification may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14485. 
GME GME R-10B-12 EN-Straight Ahead Stability-English/German 
GME GME R-10B-13 EN-Tires Steering Response-English/German 
GME GME R-10B-14 EN-Lateral Stiffness of Tires-English/German 
GME GME R-10B-15 EN-Ridging-English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW15002. 
GME GME R-10B-16 EN-Vehicle Handling on Wet Road Surface (Wet Handling)-English/German 
GME GME R-10B-17 EN-Braking Distance in Wet Conditions-English/German; Includes Appendix A 
GME GME R-10B-18 EN-Aquaplaning Longitudinal Direction-English/German; Includes Appendix A 
GME GME R-10B-19 EN-Aquaplaning Transverse Direction-English/German 
GME GME R-10B-20 EN-Characteristics in Winter Conditions-English/German; Includes Appendix A; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by 
GME GME R-10B-21 EN-Tire Run-In and Initial Evaluation-English/German 
GME GME R-10B-22 EN-Maximum Pothole Test-English/German 
GME GME R-10B-23 EN-Tire Bead Unseating Test-English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW15270. 
GME GME R-10B-24 EN-Unbalance Test of Cover Wheel-English/German 
GME GME R-10B-25 EN-Retaining Force of Wire Rings in Cover Wheels-English/German 
GME GME R-10B-26 EN-Measurement of the Retaining Force of Cover Wheel-English/German 
GME GME R-10B-27 EN-Drop Test -B- Cover Wheel-English/German 
GME GME R-10B-28 EN-Drop Test -A- Cover Wheel-English/German 
GME GME R-10B-3 EN-Test of Production Tires-English/German 
GME GME R-10B-30 EN-Measurement of Braking Distance on Dry Road Surface-English/German 
GME GME R-10B-4 EN-Rapid Air Loss Test - Tyre Slitting Test-English/German 
GME GME R-10B-6 EN-Ride Evaluation-English/German 
GME GME R-10B-7 EN-Production Release Check for Tires (Summer Type)-English; German 
GME GME R-10B-9 EN-Rolling Behaviour-English/German 
GME GME R-10C-01 EN-Wheel Clearance Front and Rear Axle-English/German 
GME GME R-11E-1 EN-Test of Engine Compartment Insulation Strength Test on Ground Contact-English/German; Includes Appendix A; This specification may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded f 
GME GME R-14D-1 EN-Durability Test of Roof Load Carrier-English/German 
GME GME R-3-1 EN-Abuse Test of Front Suspension-English/German 
GME GME R-3-2 EN-Curb Skid Test 30°-English/German 
GME GME R-3-2 EN-Curb Skid Test 30 Degree-English/German 
GME GME R-3-4 EN-Curb Skid Test 45 Degree-English/German 
GME GME R-3-5 EN-Battering Ram Test-Revision 2; English/German 
GME GME R-3/4-3 EN-Accelerated Chassis Durability Test DPG 6-English 
GME GME R-3/4-4 EN-ISO Lane-Changing Test (ISO/TR 3888)-English/German 
GME GME R-3B/4A5-3 EN-Temperature and Pressure Measure Twin Wheel Roller Bearings-English/German 
GME GME R-4-3 EN-Acceleration Test (Drag Start Test)-English/German 
GME GME R-4-5 EN-Axle Drive resp. Drive Train "Soap Test"-English/German 
GME GME R-4-7 EN-"Rossfeldfahrt" - Test of the Powertrain on the Heavy Load Trail-English/German 
GME GME R-4/7-1 EN-High Speed Test-English/German 
GME GME R-4/7-6 EN-Stop and Go Test DPG-English/German 
GME GME R-4A-1 EN-Propshaft Centre Bearing Rigidity-English/German 
GME GME R-5-1 EN-Brake Effectiveness and Brake Power Distribution-English/German 
GME GME R-5-10 EN-Piston Seat with Worn Brake Pads-English/German 
GME GME R-5-11 EN-High Temperature Test of Drum Brake Linings-English/German 
GME GME R-5-14 EN-Brake Pull-English/German 
GME GME R-5-15 EN-Brake Noise Evaluation-English/German 
GME GME R-5-16 EN-Brake Chatter and Pulsation-English/German 
GME GME R-5-17 EN-Low Temperature Sensitivity-English/German 
GME GME R-5-2 EN-Short Test of Brake Effectiveness Power Distribution and Fading 
GME GME R-5-20 EN-Grossglockner Downhill Test-English/German 
GME GME R-5-21 EN-Stilfser Joch Downhill Test-English/German 
GME GME R-5-22 EN-Towing Test-English/German 
GME GME R-5-23 EN-Inspection of a Second-Source Layer-English/German 
GME GME R-5-24 EN-EC Type Approval of Brakes-English/German 
GME GME R-5-25 EN-Brake Test for Passenger Cars Sweden F 18-English/German 
GME GME R-5-26 EN-Brake Test According MVSS 105 a-English/German 
GME GME R-5-27 EN-Corrosion Removal Program for Brake Rotors-English/German 
GME GME R-5-28 EN-Investigation Program for Competitive Cars-English/German 
GME GME R-5-29 EN-Functional Test of Brake Fluid Level Warning Lamp-English/German 
GME GME R-5-3 EN-Extended Brake Effectiveness and Brake Power Distribution Test-English/German 
GME GME R-5-35 EN-Vacuum Measurement-English/German 
GME GME R-5-36 EN-Brake Effectiveness Brake Power Distribution and "KBW Fading Fading Test"-English/German 
GME GME R-5-37 EN-Brake Effectiveness Power Distribution and Fading "20 Successive Stops"-English/German 
GME GME R-5-4 EN-Water Recovery-English/German 
GME GME R-5-40 EN-Durability Test of Brakes-English/German 
GME GME R-5-41 EN-Brake Lining Wear Test-English/German 
GME GME R-5-5 EN-Parking Brake Test-English/German 
GME GME R-5-6 EN-Panic Stops-English/German 
GME GME R-5-7 EN-Loss of Pedal Travel under different Conditions and Measurement of Piston Displacement-English/German 
GME GME R-5-8 EN-Brake System Capacity-English/German 
GME GME R-5-9 EN-Spillage Test-English/German 
GME GME R-9-1 EN-Steering Effort-English/German 
GME GME R-9-7 EN-Steering Returnability-English/German 
GME GME R-9-8 EN-Steering Force Test-English/German; This specification may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14401. 
GME GME R-9-9 EN-Steering System Temperatures-English/German 
GME GME R-9B-1 EN-Vertical Steering Wheel Shake-English/German 
GME GME R-9B-2 EN-Steering Wheel Torsional Vibrations-English/German 
GME GME R-9B-3 EN-Out-of-balance Influence on Steering Wheel Torsional Vibrations-English/German 

1  2   > >  


  • About IHS
  • Site Map
  • Privacy Policy
  • Legal Statement ©2011 IHS Inc. All Rights Reserved.