GME and GMI Laboratory Test Procedures Powertrain Collection
This collection contains documents from the following standards organization(s): General Motors Europe 1 2 3 > >
| GME GME L-6-2 | EN-Engine Run-In CIH-Engines-English/German | |
| GME GME L-6-21 | EN-Main Axles of Inertia and Strong Point of Axymmetrical Non-Homogeneous Bodies-English/German | |
| GME GME L-6-22 | EN-COP Diesel Smoke-English/German; Includes Appendix A | |
| GME GME L-6-23 | EN-COP Engine Power-English/German; Includes Appendix A | |
| GME GME L-6-3 | EN-Cold Start and Cranking Tests on Spark Ignition Engines-English/German | |
| GME GME L-6-40 | EN-Determination of Exhaust Gas Recirculation Rate (EGR)-English/German | |
| GME GME L-6-41 | EN-Exhaust Gas Recirculation Rate (EGR) - Mixture Distribution-English/German | |
| GME GME L-6-42 | EN-3 h Full Load Short Run-In Program for a Gasoline Engine on the Test Stand-English/German; Includes Appendix A | |
| GME GME L-6-43 | EN-Determining the Air/Fuel Ratio in Full and Part Load of an Engine on the Engine Test Stand-English/German; Includes Appendix A and B | |
| GME GME L-6-44 | EN-Automatic Targeting of Map Points-English/German; Includes Appendix A | |
| GME GME L-6-45 | EN-Development of the Crankcase Ventilation of an Engine on the Engine Test Stand-English/German | |
| GME GME L-6-46 | EN-Measurement of the Absolute Idle Speed Fuel Consumption of an Engine on the Engine Test Stand-English/German | |
| GME GME L-6-47 | EN-Standard Point Measurement on the Engine Test Stand-English/German | |
| GME GME L-6-48 | EN-Determining the Drag Power of an Engine on the Engine Test Stand-English/German | |
| GME GME L-6-49 | EN-Determining the Full Load Net Power of an Engine on the Engine Test Stand-English/German | |
| GME GME L-6-50 | EN-Warm-Up and Learning Procedure-English/German | |
| GME GME L-6-51 | EN-Ignition Curves-English/German | |
| GME GME L-6-52 | EN-Determining the Optimum Ignition of an Engine on the Engine Test Stand-English/German; Includes Appendix A | |
| GME GME L-6-53 | EN-Determining the Fuel Consumption of an Engine on the Engine Test Stand (Road Part Load Consumption)-English/German; Includes Appendix A | |
| GME GME L-6-54 | EN-Rear Side Waviness of Toothed Belts-English/German | |
| GME GME L-6-6 | EN-Blue Smoke Test-English | |
| GME GME L-6A02-1 | EN-Durability Bench Test of Cylinder Head Gaskets-English/German | |
| GME GME L-6A02-3 | EN-Cylinder Distortion Measurement-English/German; Includes Appendix 1 - 3 | |
| GME GME L-6A02-4 | EN-Leak Test with Increased Cooling System Pressure-English/German | |
| GME GME L-6A02-7 | EN-Distribution of Surface Pressure-English/German | |
| GME GME L-6A02-9 | EN-Thickness Measurement of Cylinder Head Gaskets-English/German | |
| GME GME L-6A1-1 | EN-Behaviour of Engine Oils in the Positive Crankcase Ventilation System of the 1.3 OHC Engine-English/German | |
| GME GME L-6A2-10 | EN-Evaluation of Knock Control Systems-German | |
| GME GME L-6A2-2 | EN-Cold-Hot Test for Cylinder Head Gaskets-English | |
| GME GME L-6A2-5 | EN-Test of Cylinder Head Gasket Knocking Combustion-English/German | |
| GME GME L-6A2-6 | EN-Nitrogen Test of Cylinder Head Gaskets-English/German | |
| GME GME L-6A2-8 | EN-Operation Oriented Design of Intake Components of Four-Stroke Inductive Engines-English | |
| GME GME L-6A3-1 | EN-Determination of Engine Compression Ratio-English/German | |
| GME GME L-6B-1 | EN-Engine Identification-English/German | |
| GME GME L-6C-1 | EN-Crankshaft Fatigue Test - Survey-English/German | |
| GME GME L-6C-2 | EN-Crankshaft Guide Bearings-English/German | |
| GME GME L-6C3/K1-1 | EN-Flywheel and Fan Burst Strength-English/German | |
| GME GME L-6D-3 | EN-Fatigue Test of Connecting Rods on the Pulsator-English/German | |
| GME GME L-6G-1 | EN-Engine Oil Consumption-English/German | |
| GME GME L-6G05-1 | EN-Oil Filter Durability Test-English | |
| GME GME L-6G07-3 | EN-Oil Ageing Test-English/German | |
| GME GME L-6K/X-1 | EN-Timing Belt Fatigue Test-English | |
| GME GME L-6K02-10 | EN-Poly V-Belt Noises-English/German | |
| GME GME L-6K02-4 | EN-V-Belt-English | |
| GME GME L-6K02-5 | EN-V-Belt Noises-English/German | |
| GME GME L-6K03-4 | EN-Thermostats-English/German; Replaced by GME L-6K03-1 | |
| GME GME L-6K2-1 | EN-FATIGUE TEST OF WATER PUMPS-English/German | |
| GME GME L-6K2-12 | EN-Cold Start Test for V-Ribbed Belts-English | |
| GME GME L-6K2-8 | EN-Service Life of V-Belt and Poly-V-Belt under Dynamometer Hot Idle Conditions-English | |
| GME GME L-6K2-9 | EN-Maintenance-Free V-Belt Fatigue-English | |
| GME GME L-6K3-1 | EN-DETERMINATION OF THE STATIC CHARACTERISTICS AND DURABILITY TEST OF THERMOSTATS-English/German | |
| GME GME L-6M1-1 | EN-Flowing of Carburetors-English/German | |
| GME GME L-6M4-1 | EN-Fuel Pump Function Test-English/German | |
| GME GME L-6M4-2 | EN-Fuel Pump Durability Test-English/German | |
| GME GME L-6M6-1 | EN-Pintle Stroke Measurements on Diesel Engines-English/German | |
| GME GME L-6N2-1 | EN-Accelerator Pedal Durability-English/German | |
| GME GME L-6Q-2 | EN-Engine Mounts-English/German | |
| GME GME L-6Q-5 | EN-Durability of Synthetics and Elastomer Parts in Combination with Metal Parts-English/German | |
| GME GME L-6R-1 | EN-Dynamometer Test of Spark Ignition Engines-English/German | |
| GME GME L-6R-2 | EN-Tolerance Band of Compression Ratio-English/German | |
| GME GME L-6R-3 | EN-Porosities and Blowholes in Cylinder Block-English/German | |
| GME GME L-6T1-1 | EN-Vacuum Pumps for Brake Booster-English | |
| GME GME L-6X01-3 | EN-Valve Steam Sealing-English/German | |
| GME GME L-6X01-4 | EN-Engine Oil - Camshaft / Valve Lifter Wear Test-English/German | |
| GME GME L-6X01-5 | EN-Camshaft Wear Test-English/German | |
| GME GME L-6X1-1 | EN-Valve Spring Test-English | |
| GME GME L-6X1-2 | EN-Dome Roundness of Rocker Arm-English/German | |
| GME GME L-6X1-6 | EN-Camshaft Seize Test-English | |
| GME GME L-6Y-1 | EN-Misfiring Complete Test-English/German | |
| GME GME L-6Y-2 | EN-Spark Knock-English/German | |
| GME GME L-6Y03-1 | EN-Engine Washing-English/German | |
| GME GME L-6Y1-1 | EN-Fatigue Test of V-Ribbed Belts-English | |
| GME GME L-6Y1-2 | EN-Alternator Capacity at Engine Idle Speed-English/German | |
| GME GME L-6Y2-1 | EN-Starter and Solenoid Switch-English/German | |
| GME GME L-6Y3-3 | EN-Distributor Cap Aging Test-English/German | |
| GME GME L-7A-1 | EN-Gear of MT Transmission-German | |
| GME GME L-7B01A-3 | EN-Fatigue Test of Cover Gear Shift on FWD Transmission Case-English/German; Replaced by GMI L-7B01A-3 | |
| GME GME L-7B01B-1 | EN-Test Program Clutch Assembly-English/German | |
| GME GME L-7B01B-10 | EN-Fading Test Clutch Assembly-English/German |
1 2 3 > >