GME and GMI Laboratory Test Procedures Chassis Collection
This collection contains documents from the following standards organization(s): General Motors Europe 1 2 3 > >
| GME GME L-10B-1 | EN-Disk Wheel Assembly-Durability Test-English/German | |
| GME GME L-10B-10 | EN-Dynamic Test of Disk Cover Wheel-English/German | |
| GME GME L-10B-5 | EN-Disk Wheel - Mounting Holes-English/German | |
| GME GME L-10B-8 | EN-Tire Or Wheel And Tire Assembly-English/German | |
| GME GME L-10B-9 | EN-High Speed Test-English/German; Includes Appendix A | |
| GME GME L-11D-1 | EN-Hood Slamming Test-English/German | |
| GME GME L-14A-1 | EN-Bumpers - Barrier Test-English/German | |
| GME GME L-14A-2 | EN-Bumpers - Pendulum Test-English/German | |
| GME GME L-14A-3 | EN-Inspection of Bumpers and Bumpers with Integral Spoilers-English/German | |
| GME GME L-14E-1 | EN-Test Procedures for Jacjing Tests-English/German | |
| GME GME L-14E01-1 | EN-Determination of the Maximum Jack Supporting Force-English/German | |
| GME GME L-14L-1 | EN-Trailer Hitch Durability Test-English/German | |
| GME GME L-3/4-2 | EN-Rotary Bending Test of Front and Rear Wheel Hubs-English/German | |
| GME GME L-3/4-3 | EN-Roll Rate-Revision 2; English/German; Replaced by GMW14807 | |
| GME GME L-3/4-4 | EN-Roll Geometry of a Passenger Car Wheel Suspension-Revision 2; English/German; Replaced by GMW14807 | |
| GME GME L-3/4-5 | EN-Wheel and Axle Rates of a Passenger Car Wheel Suspension-Revision 2; English/German; Replaced by GMW14807 | |
| GME GME L-3/4-7 | EN-Parallel Suspension Geometry-Revision 2; English/German; Replaced by GMW14807 | |
| GME GME L-3A-1 | EN-Bushings - Control Arm-English/German | |
| GME GME L-3A-10 | EN-Fatigue Test of Front Axle Spring Seats-English/German; This specification may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14250. | |
| GME GME L-3A-2 | EN-Durability Test of Steering Knuckles Support and Guide Joint Ball Stud and Steering Knuckle Arm-English/German | |
| GME GME L-3A-3 | EN-Wear Characteristic of Wheel Joints-English/German | |
| GME GME L-3A-4 | EN-Durability Test of Wheel Joints Boots-English/German | |
| GME GME L-3A-6 | EN-Durability Test of Bushing Shock Absorber Mounting-English | |
| GME GME L-3A-8 | EN-Bearings for Strut Mounts-English/German | |
| GME GME L-3A/4A-6 | EN-Fatigue Test of Pinion Thrust Washer in the Differential Case-English/German | |
| GME GME L-3A01-3 | EN-Bellows - Outside Axle Shaft - FWD/Durability Test on the Test Stand-English/German; This specification may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future project | |
| GME GME L-3A04-1 | EN-Durability Test of Homokinetic Joints Axle Shaft FWD-English/German | |
| GME GME L-3A04-3 | EN-Homokinetic Joints for Axle Shafts-FWD/RWD Durability Bench Test-English/German; Includes Appendix A - G; This specification may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded f | |
| GME GME L-3A04-4 | EN-Bellow-Inner Axle Shaft FWD Durability Test on the Test Bench-English/German | |
| GME GME L-3A2-1 | EN-Fatigue Test of FWD Axle Shafts and Joints-English/German | |
| GME GME L-3A4-2 | EN-Fatigue Test Of FWD Axle Shaft Boots (Hot And Cold Test)-English/German | |
| GME GME L-3B-1 | EN-Lip Seals for Wheel Hubs-English | |
| GME GME L-3B/4A5-1 | EN-Hub Unit Wheel Bearings for Ingress of Water-English/German | |
| GME GME L-3B/4A5-2 | EN-Wheel Bearing Test (except for Rigid Axles)-English/German | |
| GME GME L-3B/4A5-3 | EN-Frictional Torque of Wheel Bearings-English/German | |
| GME GME L-3C-01 | EN-System Test of Front and Rear Suspension Springs-Revision 2; English/German | |
| GME GME L-3C-3 | EN-Fatigue Test of Macpherson Struts and Strut Cartridges-English/German | |
| GME GME L-3C/4C-2 | EN-Dynamic Test of Damping Rings (Spring Seat)-English/German | |
| GME GME L-3E/4D-1 | EN-Fatigue Test for Rebound Bumpers of Hydraulic Vibration Dampers-English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and repla | |
| GME GME L-3F-3 | EN-Shock Absorber Attachment-English/German | |
| GME GME L-3F/4E-1 | EN-Fatigue Test of Ride Control Struts and Shock Absorbers-English | |
| GME GME L-3F/4E-2 | EN-Fatigue Test of Hydraulic Shock Absorbers-English/German | |
| GME GME L-3F/4E-3 | EN-Morning Knock-English/German | |
| GME GME L-3G-1 | EN-Fatigue Test of Plastic Stabilizer Links-English/German | |
| GME GME L-3G-3 | EN-Fatigue Test of Hinged Tie Bar and Hinged Tie Bar Bracket Connection of Stabilizer Bar and Strut Tube-English/German | |
| GME GME L-3G/4F-1 | EN-Stabilizer Bearing-English | |
| GME GME L-3G/4F-2 | EN-Durability Test of Stabilizers in an Axle System-English/German | |
| GME GME L-4A-2 | EN-Automatic Vehicle Level Control System-English/German | |
| GME GME L-4A-3 | EN-Automatic Vehicle Level Control System (V/J-car)-English/German | |
| GME GME L-4A01-18 | EN-Rotation Bending and Torsional Test of Rear Wheel Spindle-German | |
| GME GME L-4A1-1 | EN-Fatigue Test of Rear Axle Gearing-English | |
| GME GME L-4A1-10 | EN-Dynamic Function Test Limited Slip Differential-English | |
| GME GME L-4A1-11 | EN-Cold Start Test Rear Axle-English | |
| GME GME L-4A1-16 | EN-Fatigue Test Homogkinetic Joint Axle Shaft RWD-English | |
| GME GME L-4A1-17 | EN-Durability Test of Bellows Drive Shaft Rear Axle RWD-German | |
| GME GME L-4A1-2 | EN-Fatigue Test Bevel Gears Differential-English | |
| GME GME L-4A1-3 | EN-Examination of Rear Axle Oil-English/German | |
| GME GME L-4A1-4 | EN-Differential Case (Fatigue Test)-English | |
| GME GME L-4A1-5 | EN-Deformation Test of Rear Axle Transmissions-English | |
| GME GME L-4A1-6 | EN-Fatigue Test of Rear Axle Bearings-English | |
| GME GME L-4A1-7 | EN-Static Function Test Limited Slip Differential-English | |
| GME GME L-4A4-1 | EN-Durability Test Bellows Propeller Shaft-German | |
| GME GME L-4A4-3 | EN-Fatigue Test of Homocinetic Joint Propeller Shaft RWD-English | |
| GME GME L-4A5-1 | EN-Leakage Test of Sealed Roller Bearings-English | |
| GME GME L-4E-1 | EN-Rear Axle Dampers (Dynamical Durability)-English | |
| GME GME L-5-1 | EN-Durability Test of Brake Boosters Brake Proportioning Valves Calipers and Slave Cylinders-English/German | |
| GME GME L-5-2 | EN-Cold Test of Brake Sleeves-English/German | |
| GME GME L-5-3 | EN-Clearance Conditions of Brake Components-English/German | |
| GME GME L-5-4 | EN-Plotting of Pedal Force Diagrams-English/German | |
| GME GME L-5-6 | EN-Evaluation of Brake Saddle Rigidity-English/German | |
| GME GME L-5-8 | EN-Elastic Deformation of the Dash Wall-English/German | |
| GME GME L-5-9 | EN-Brake Pedal Durability and Deformation Test-English/German; This specification may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14377 | |
| GME GME L-5A-10 | EN-Inertia Dynamometer Test of Brake Systems with Ventilated Brake Disks-English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and | |
| GME GME L-5A/B-1 | EN-Vibration Test Brake Caliper-English/German | |
| GME GME L-5A/B-11 | EN-Quality Control of Disk Brake Pads-English/German | |
| GME GME L-5A/B-12 | EN-AK-Master Test Schedule-English/German | |
| GME GME L-5A/B-3 | EN-Inertia Dynamometer Brake Test-Replaced by GMI L-5A/B-3 | |
| GME GME L-5A/B-4 | EN-Brake Rotor Erosion Schedule on the Coefficient of Friction Test Stand-English/German | |
| GME GME L-5A/B-6 | EN-Cap Wheel Brake Cylinder-English/German |
1 2 3 > >