FORD - Worldwide Fastener Standards Collection
This collection contains documents from the following standards organization(s): Ford Motor Company 1 2 3 > >
| FORD WA 970 | EN-Performance Requirements for Bolts with Plastic Prevailing Torque Feature | |
| FORD WA 971 | EN-Dimensions Material and Physical Properties and Performance Requirements of Through Hardened and Carbon Restored POWERLOK Bolts with a Special Crest Configuration | |
| FORD WA 978 | EN-DIMENSIONAL REQUIREMENTS FOR BOLTS WITH CROSS THREAD PREVENTION (CTP) POINTS. | |
| FORD WA100 | EN-BOLTS - HEXAGON FLANGE HEAD FULLY THREADED | |
| FORD WA101 | EN-BOLTS - HEXAGON FLANGE HEAD PARTIALLY THREADED | |
| FORD WA102 | EN-BOLTS - HEXAGON FLANGE HEAD PARTIALLY THREADED | |
| FORD WA110 | EN-BOLTS - HEXAGON FLANGE HEAD FULLY THREADED - PILOTED | |
| FORD WA111 | EN-BOLTS HEXAGON FLANGE HEAD PARTIALLY THREADED PILOTED | |
| FORD WA112 | EN-BOLTS - HEXAGON FLANGE HEAD PARTIALLY THREADED PILOTED | |
| FORD WA120 | EN-BOLTS - HEXAGON FLANGE HEAD FULLY THREADED | |
| FORD WA121 | EN-BOLTS - HEXAGON FLANGE HEAD PARTIALLY THREADED | |
| FORD WA122 | EN-BOLTS - HEXAGON FLANGE HEAD PARTIALLY THREADED | |
| FORD WA130 | EN-BOLTS - HEXAGON FLANGE HEAD FULLY THREADED PILOTED | |
| FORD WA131 | EN-BOLTS - HEXAGON FLANGE HEAD PARTIALLY THREADED PILOTED | |
| FORD WA132 | EN-BOLTS - HEXAGON FLANGE HEAD PARTIALLY THREADED PILOTED | |
| FORD WA150 | EN-BOLTS - HEXAGON HEAD FULLY THREADED | |
| FORD WA151 | EN-BOLTS - HEXAGON HEAD FULLY THREADED | |
| FORD WA152 | EN-BOLTS - HEXAGON HEAD PARTIALLY THREADED REDUCED SHANK | |
| FORD WA154 | EN-BOLTS - HEXAGON HEAD PARTIALLY THREADED REDUCED SHANK | |
| FORD WA160 | EN-BOLTS - HEXAGON HEAD FULLY THREADED PILOTED | |
| FORD WA161 | EN-BOLTS-HEXAGON HEAD FULLY THREADED PILOTED | |
| FORD WA162 | EN-BOLTS-HEXAGON HEAD PARTIALLY THREADED REDUCED SHANK PILOTED | |
| FORD WA163 | EN-BOLTS-HEXAGON HEAD PARTIALLY THREADED REDUCED SHANK PILOTED | |
| FORD WA164 | EN-BOLTS-HEXAGON HEAD PARTIALLY THREADED REDUCED SHANK PILOTED | |
| FORD WA165 | EN-BOLTS-HEXAGON HEAD PARTIALLY THREADED REDUCED SHANK PILOTED | |
| FORD WA200 | EN-STUD - SELF PIERCING -- PILOTED | |
| FORD WA300 | EN-BOLT - HEXAGON FLANGE HEAD FULLY THREADED ´NP´ PILOT | |
| FORD WA301 | EN-BOLT - HEXAGON FLANGE HEAD PARTIALLY THREADED ´NP´ PILOT | |
| FORD WA320 | EN-BOLT - HEXAGON FLANGE HEAD FULLY THREADED ´NP´ PILOT | |
| FORD WA321 | EN-BOLT - HEXAGON FLANGE HEAD PARTIALLY THREADED 'NP' PILOT | |
| FORD WA900 | EN-Dimensional Requirements of Hexagon Bolts Flanged Hexagon Bolts and Hexagon Bolt&Washer Assemblies | |
| FORD WA910 | EN-Dimensional Material and Physical Properties of Flanged Hexagon Bolts with a Serrated Underhead Bearing Surface. | |
| FORD WA911 | EN-DIMENSIONAL MATERIAL AND PHYSICAL PROPERTIES OF FLANGED HEXAGON BOLTS WITH A SPECIAL RADIAL GROOVED UNDERHEAD BEARING SURFACE | |
| FORD WA950 | EN-Material Requirements and Mechanical Properties of Bolts Studs and Bolt & Washer Assemblies. | |
| FORD WA951 | EN-MATERIAL REQUIREMENTS AND MECHANICAL PROPERTIES OF BOLTS STUDSAND BOLT & WASHER ASSEMBLIES POWERTRAIN DIVISION - HIGH DUTY FASTENERS | |
| FORD WA960 | EN-Material and Performance Requirements of Weld Bolts | |
| FORD WA961 | EN-MATERIAL PHYSICAL PROPERTIES AND PERFORMANCE OF PIERCE STUDS | |
| FORD WA972 | EN-THREAD DIMENSIONS FOR LOCKING THREADS - ROOT INTERFERENCE TYPE | |
| FORD WA975 | EN-MATERIAL HEAT TREAMENT AND PERFORMANCE OF BOLTS WITH A KNURLED OR SPLINED SHANK | |
| FORD WA976 | EN-Dimensional Material and Physical Properties of All Metal Prevailing Torque Bolts | |
| FORD WA990 | EN-SURFACE DISCONTINUITIES OF BOLTS AND STUDS | |
| FORD WB100 | EN-BOLT PAN HEAD CROSS RECESSED DRIVE - TYPE Z | |
| FORD WB103 | EN-BOLT PAN HEAD 6 LOBE DRIVE-M3 SIZES NOT TO BE USED FOR NEW DESIGNS | |
| FORD WB106 | EN-BOLT PAN HEAD - PILOTED 6 LOBE DRIVE-M3 SIZES NOT TO BE USED FOR NEW DESIGNS | |
| FORD WB110 | EN-BOLT PAN HEAD - WITH TOOTH LOCK WASHER CROSS RECESSED DRIVE - TYPE Z | |
| FORD WB200 | EN-BOLT RAISED HEAD - 90 DEGREE COUNTERSUNK(OVAL) CROSS RECESSED DRIVE - TYPE Z | |
| FORD WB203 | EN-BOLT RAISED HEAD - 90 DEGREE COUNTERSUNK(OVAL) 6 LOBE DRIVE-M3 SIZES NOT TO BE USED FOR NEW DESIGNS | |
| FORD WB206 | EN-BOLT RAISED HEAD - 90 DEGREE COUNTERSUNK(OVAL) PILOTED - 6 LOBE DRIVE-M3 SIZES NOT TO BE USED FOR NEW DESIGNS | |
| FORD WB210 | EN-BOLT RAISED HEAD - 90 DEGREE COUNTERSUNK (OVAL) WITH TOOTH LOCK WASHER CROSS RECESSED DRIVE - TYPE Z | |
| FORD WB300 | EN-BOLT 90 DEGREE COUNTERSUNK (FLAT HEAD) CROSS RECESSED DRIVE - TYPE Z | |
| FORD WB303 | EN-MACHINE SCREWS 90 DEGREES COUNTERSUNK(FLAT HEAD) 6 LOBE DRIVE | |
| FORD WB306 | EN-MACHINE SCREWS 90 DEGREES COUNTERSUNK(FLAT HEAD) PILOTED - 6 LOBE DRIVE | |
| FORD WB310 | EN-BOLT 90 DEGREE COUNTERSUNK (FLAT HEAD) WITH TOOTH LOCK WASHER CROSS RECESSED DRIVE - TYPE Z | |
| FORD WB900 | EN-GENERAL AND DIMENSIONAL REQUIREMENTS OF PAN HEAD RAISED COUNTERSUNK HEAD AND FLAT COUNTERSUNK HEAD MACHINE SCREWS AND MACHINE SCREW AND TOOTH WASHER ASSEMBLIES | |
| FORD WB900 APPENDIX A | EN-GAUGING OF THE RECESS OF PAN RAISED COUNTERSUNK AND FLAT COUNTERSUNK HEAD PRODUCTS | |
| FORD WB900 APPENDIX B | EN-GAUGING OF THE HEAD OF COUNTERSUNK SCREW HEAD PRODUCTS | |
| FORD WB900 APPENDIX D | EN-DIMENSIONAL REQUIREMENTS FOR INTERNAL LOBED RECESSES | |
| FORD WB900 APPENDIX E | EN-LOBED EXTERNAL DRIVE SYSTEM FOR THREADED FASTENERS | |
| FORD WB980 | EN-PAINT CLEARING SCREWS - PERFORMANCE | |
| FORD WC100 | EN-SCREWS - HEXAGON HEAD AND CONICAL SPRING WASHER ASSEMBLY | |
| FORD WC110 | EN-SCREWS - HEXAGON HEAD AND CONICAL SPRING WASHER ASSEMBLY WITH PILIT POINT | |
| FORD WC120 | EN-BOLT - HEXAGON FLANGE HEAD AND CONICAL WASHER PILOT | |
| FORD WC121 | EN-BOLT - HEXAGON FLANGE HEAD AND CONICAL WASHER PILOT | |
| FORD WC130 | EN-BOLT & WASHER - HEXAGON HEAD ´NP´ PILOT | |
| FORD WC900 | EN-GENERAL SPECIFICATION FOR HEXAGON HEAD SCREW AND CONICAL SPRING WASHER ASSEMBLIES | |
| FORD WD 314 | EN-THREAD FORMING SCREWS FOR PLASTIC - THROUGH HARDENED REMFORM AND PT FASTENERS HEXAGON COLLAR HEAD | |
| FORD WD 315 | EN-THREAD FORMING SCREWS FOR PLASTIC - THROUGH HARDENED REMFORM AND PT FASTENERS PAN COLLAR HEAD | |
| FORD WD 952 | EN-Mechanical and Performance Requirements of Through Hardened and Carbon Restored Thread Rolling Screws with Induction Hardened Points | |
| FORD WD 954 | EN-Material and Performance Requirements for Screws Used in Thermoplastics Materials | |
| FORD WD 956 | EN-Mechanical and Performance Requirements of Through Hardened and Carbon Restored Thread Rolling Screws for Use in Aluminum Applications | |
| FORD WD100 | EN-TAPPING SCREW - CARBON STEEL TYPE AB HEXAGON FLANGE HEAD | |
| FORD WD101 | EN-TAPPING SCREW - CARBON STEEL TYPE B HEXAGON FLANGE HEAD | |
| FORD WD102 | EN-TAPPING SCREW - HEXAGON COLLAR HEAD - TYPE R POINT CATEGORY 070.025 | |
| FORD WD110 | EN-TAPPING SCREW - TYPE AB PAN HEAD CROSS RECESSED DRIVE - TYPE Z | |
| FORD WD111 | EN-TAPPING SCREW - TYPE B PAN HEAD CROSS RECESSED DRIVE - TYPE Z | |
| FORD WD112 | EN-TAPPING SCREW - PAN HEAD - TYPE R POINT HEXALOBULAR SOCKET | |
| FORD WD120 | EN-TAPPING SCREW - TYPE AB RAISED HEAD - 90 DEGREES COUNTERSUNK (OVAL) CROSS RECESSED DRIVE - TYPE Z CATEGORY 080.040 | |
| FORD WD121 | EN-TAPPING SCREW - CARBON STEEL TYPE AB 90 DEGREES COUNTERSUNK (FLAT HEAD) CROSS RECESSED DRIVE - TYPE Z | |
| FORD WD122 | EN-TAPPING SCREW - CARBON STEEL TYPE B 90 DEGREES COUNTERSUNK (FLAT HEAD) CROSS RECESSED DRIVE - TYPE Z |
1 2 3 > >