IHS Home PageIHS

Industry Standards & Regulations

Print Page Email Page Smaller Text Larger Text

DOD ADOPTED SUPPLEMENTAL - Excluding Core and AWS Collection

This collection contains documents from the following standards organization(s): Magnetic Materials Producers Association, Underwriters Laboratories Inc., National Fire Protection Association, International Organization for Standardization, American Society of Sanitary Engineering, Steel Door Institute, American Society of Heating Refrigerating and Air-Conditioning Engineers Inc., NSF International, American Bearing Manufacturers Association, International Society of Automation

    • Show All 72 Standards Organizations

      TechAmerica, Sheet Metal and Air Conditioning Contractors' National Association Inc., Plumbing-Heating-Cooling Contractors-National Association, The American Association of Textile Chemists and Colorists, American Institute of Timber Construction, American Gear Manufacturers Association, Air Movement and Control Association Inc., American Concrete Institute, Air-Conditioning Heating and Refrigeration Institute, Electronic Components Association, American Society of Civil Engineers, National Electrical Manufacturers Association, American Institute of Steel Construction, Electronic Industries Alliance, Canadian General Standards Board, International Electrotechnical Commission, ASME International, American Hardboard Association, Builders Hardware Manufacturers Association Inc., Composite Panel Association, North Atlantic Treaty Organization, The Aluminum Association Inc., International Association of Plumbing and Mechanical Officials, American Gas Association, American National Standards Institute, American Water Works Association, Coated Abrasives Manufacturers Institute Inc., Automatic Identification Manufacturers Inc., Cordage Institute, The Engineered Wood Association, Institute of Clean Air Companies, Pipe Fabrication Institute, Cooling Technology Institute, Plumbing and Drainage Institute, European Telecommunications Standards Institute, American Association of State Highway and Transportation Officials, Standards Australia International Ltd., Hardwood Plywood and Veneer Association, International Code Council, Rubber Manufacturers Association, Telecommunications Industry Association, Solid State Technology Association, Material Handling Institute Inc., Battelle Memorial Institute, Construction Specifications Institute Inc., The Society for Protective Coatings, Parachute Industry Association, American Lumber Standards Committee, American Society for Quality, American Institute of Aeronautics and Astronautics, American Petroleum Institute, Illuminating Engineering Society of North America, NACE International, Insulated Cable Engineers Association Inc., Acoustical Society of America, Manufacturers Standardization Society of the Valve and Fittings Industry., National Fluid Power Association, The Plastics Pipe Institute Inc., International Telecommunication Union/ITU Telcommunication Sector, American Society of Safety Engineers, National Information Standards Organization, National Conference of Standards Laboratories
ASME B16.9 INTERPRETATIONS EN-Interpretations to B16.9-1993 Factory-Made Wrought Steel Buttwelding Fittings-Includes Interpretation No. 1 
ASME B17.1 EN-KEYS AND KEYSEATS 
ASME B17.2 EN-Woodruff Keys and Keyseats-Revision of USAS B17F-1930 
ASME B18.1.3M EN-Metric Small Solid Rivets 12 mm Nominal Diameter and Smaller-Errata - October 1985 
ASME B18.10 EN-Track Bolts and Nuts 
ASME B18.12 EN-Glossary of Terms for Mechanical Fasteners 
ASME B18.13 EN-Screw and Washer Assemblies - Sems (Inch Series) 
ASME B18.13.1M EN-Screw and Washer Assemblies - Sems (Metric Series) 
ASME B18.13A EN-Screw and Washer Assemblies - Sems (Inch Series) 
ASME B18.15 EN-Forged Eyebolts 
ASME B18.18.1 EN-Inspection and Quality Assurance for General Purpose Fasteners 
ASME B18.18.2 EN-Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners 
ASME B18.18.3M EN-Inspection and Quality Assurance for Special Purpose Fasteners 
ASME B18.18.4M EN-Inspection and Quality Assurance for Fasteners for Highly Specialized Engineered Applications 
ASME B18.2.1 EN-Square and Hex Bolts and Screws (Inch Series)-Addenda A - 10/08/1999; Erratum July 2003 
ASME B18.2.2 EN-Square and Hex Nuts (Inch Series) 
ASME B18.2.3.4M EN-Metric Hex Flange Screws-Supersedes IFI 536:1982 
ASME B18.2.3.7M EN-Metric Heavy Hex Structural Bolts-Errata - April 1981 
ASME B18.2.3.8M EN-Metric Hex Lag Screws 
ASME B18.2.3.9M EN-Metric Heavy Hex Flange Screws-Supersedes IFI 538:1982 
ASME B18.2.4.1M EN-Metric Hex Nuts Style 1 
ASME B18.2.4.2M EN-Metric Hex Nuts Style 2 
ASME B18.2.4.6M EN-Metric Heavy Hex Nuts 
ASME B18.21.1 EN-Washers: Helical Spring-Lock Tooth Lock and Plain Washers (Inch Series) 
ASME B18.21.2M EN-Lock Washers (Metric Series)-Supersedes IFI 532: 1982 
ASME B18.24 EN-Part Identifying Number (PIN) Code System Standard for B18 Fastener Products-Supersedes ASME B18.24.1 B18.24.2 and B18.24.3 
ASME B18.24A EN-Part Identifying Number (PIN) Code System Standard for B18 Fastener Products 
ASME B18.27 EN-Tapered and Reduced Cross Section Retaining Rings (Inch Series)-Incorporating ASME B18.27.1 B18.27.2 B18.27.3 B18.27.4 and B18.27.5; Addenda A - 1999; Addenda B - 11/15/2000 
ASME B18.3 EN-Socket Cap Shoulder and Set Screws Hex and Spline Keys (Inch Series)-Date of Issuance: 4/29/2005 
ASME B18.3.1M EN-Socket Head Cap Screws (Metric Series) 
ASME B18.3.2M EN-Metric Series Hexagon Keys and Bits 
ASME B18.3.3M EN-Hexagon Socket Head Shoulder Screws (Metric Series) 
ASME B18.3.5M EN-Hexagon Socket Flat Countersunk Head Cap Screws (Metric Series) 
ASME B18.3.6M EN-Metric Series Socket Set Screws 
ASME B18.5 EN-Round Head Bolts (Inch Series) 
ASME B18.5.2.2M EN-Metric Round Head Square Neck Bolts 
ASME B18.6.1 EN-Wood Screws (Inch Series) 
ASME B18.6.2 EN-Slotted Head Cap Screws Square Head Set Screws and Slotted Headless Set Screws (Inch Series) 
ASME B18.6.3 EN-Machine Screws and Machine Screw Nuts 
ASME B18.6.4 EN-Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws (Inch Series) 
ASME B18.6.5M EN-Metric Thread-Forming and Thread-Cutting Tapping Screws-2000 Edition; Revision of ANSI/ASME B18.6.5M-1986 
ASME B18.6.7M EN-Metric Machine Screws-Supersedes IFI 513: 1981 
ASME B18.7.1M EN-Metric General Purpose Semi-Tubular Rivets 
ASME B20.1 EN-Safety Standard for Conveyors and Related Equipment 
ASME B20.1 INTERPRETATIONS EN-Interpretations to B20.1 - Safety Standard for Conveyors and Related Equipment-Includes Interpretation: 11 through 23 
ASME B27.6 EN-General Purpose Uniform Cross Section Spiral Retaining Rings 
ASME B27.7 EN-General Purpose Tapered and Reduced Cross Section Retaining Rings 
ASME B27.8M EN-General Purpose Metric Tapered and Reduced Cross Section Retaining Rings Type 3DM1 - Heavy Duty External Rings Type 3EM1 - Reinforced "E" Rings Type 3FM1 - "C" Type Rings 
ASME B29.100 EN-Precision Power Transmission Double-Pitch Power Transmission and Double-Pitch Conveyor Roller Chains Attachments and Sprockets-Incorporating ASME B29.1 B29.3 and B29.4; Erratum 01/2004 
ASME B30.10 EN-Hooks - Safety Standard for Cableways Cranes Derricks Hoists Hooks Jacks and Slings-Includes Interpretations June 2005 Through June 2009 
ASME B30.10 INTERPRETATIONS EN-Interpretations to B30.10-1993 Hooks 
ASME B30.11 EN-Monorails and Underhung Cranes-Includes Interpretations Dated May 2004 thru August 2009 
ASME B30.11 INT EN-Interpretations to B30.11 Monorails and Underhung Cranes 
ASME B30.16 EN-Overhead Hoists (Underhung) Safety Standard for Cableways Cranes Derricks Hoists Hooks Jacks and Slings 
ASME B30.16 INT EN-Interpretations to B30.16 Overhead Hoists (Underhung) 
ASME B30.16 INTERPRETATIONS EN-Interpretations to B30.16-1998 Overhead Hoists (Underhung) 
ASME B30.17 EN-Overhead and Gantry Cranes ( Top Running Bridge Single Girder Underhung Hoist) 
ASME B30.2 EN-Overhead and Gantry Cranes (Top Running Bridge Single or Multiple Girder Top Running Trolley Hoist) 
ASME B30.22 EN-Articulating Boom Cranes 
ASME B30.5 EN-Mobile and Locomotive Cranes 
ASME B30.8 EN-Floating Cranes and Floating Derricks 
ASME B30.9 EN-Slings 
AWWA B300 EN-Hypochlorites 
AWWA B301 EN-Liquid Chlorine 
ASME B31.1 EN-Power Piping-Includes Interpretations No. 2 Through 6 8 through 10 1315 17 through 25 27 through 31 and 42 through 44 
ASME B31.1 INTERPRETATIONS EN-Interpretations to B31.1-1998 Power Piping-Includes Interpretations No. 2 Through 6 8 through 10 1315 17 through 25 27 through 31 and 42 through 44 
ASME B31.1A EN-Power Piping-Includes Interpretations Volume 43 
ASME B31.1B EN-Power Piping-Includes Interpretations Volume 44 
ASME B31.3 EN-Process Piping-Includes Interpretation 21 
ASME B31.4 EN-Pipeline Transportation Systems for Liquid Hydrocarbons and other Liquids-Includes Interpretations Dated June 12 2002 thru October 6 2008 
ASME B31.5 EN-Refrigeration Piping and Heat Transfer Components-Includes Interpretations Volume 8 
ASME B31.8 EN-Gas Transmission and Distribution Piping Systems-Includes Interpretations VOLUME 15 January 2007 Through September 2009 
ASME B31.8S EN-Managing System Integrity of Gas Pipelines-Supplement to ASME B31.8 
ASME B31.9 EN-Building Services Piping 
ASME B31.9 INTERPRETATIONS EN-Interpretations to B31.9-1996 Building Services Piping-Includes Interpretation No. 1-3 March 1987 through August 2007 
ASME B32.5 EN-Preferred Metric Sizes for Tubular Metal Products Other Than Pipe-Errata - 1996 
ASME B36.10M EN-Welded and Seamless Wrought Steel Pipe 
ASME B36.19M EN-Stainless Steel Pipe 
ASME B4.1 EN-Preferred Limits and Fits for Cylindrical Parts 


  • About IHS
  • Site Map
  • Privacy Policy
  • Legal Statement ©2011 IHS Inc. All Rights Reserved.