Print Page Email Page Smaller Text Larger Text

DOD ADOPTED ESSENTIAL Collection

This collection contains documents from the following standards organization(s): International Organization for Standardization, American Gear Manufacturers Association, IPC-Association Connecting Electronics Industries, The Aluminum Association Inc., American National Standards Institute, Aerospace Industries Association of America Inc., American Institute of Aeronautics and Astronautics, Acoustical Society of America, Manufacturers Standardization Society of the Valve and Fittings Industry.

Most Popular Standards from the DOD ADOPTED ESSENTIAL Collection

AIA/NAS NA0145 EN-Insert Screw Thread Key Locked Installation and Removal Procedure Metric 
AIA/NAS NASM25027 EN-Nut Self-Locking 250 Degrees F 450 Degrees F and 800 Degrees F 
AIA/NAS NAS1760 EN-Fitting End Flareless Acorn Standard Dimensions for-Rev 4 
AIA/NAS NASM33540 EN-Safety WiringSafety cablingfor Cotter Pinning General Practices for-Rev 1 
AA DAF45 EN-Designation System for Aluminum Finishes 
AIA/NAS NASM45938 EN-Nut Plain Clinch and Nut Self-Locking Clinch General Specification for 
AIA/NAS NAS1563 EN-Gages Pins and Collar Inspection Swage Locking-Rev. 9 
AGMA 2001-D04 EN-Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth 
AIA/NAS NASM47196 EN-Rivets Buck Type Preparation for and Installation of 
AIA/NAS NAS4006 EN-Aluminum Coating-Rev 3 
AIA/NAS NAS538 EN-Bushing - Flanged Press Fit Undersize Inside Diameter-REV. 8 
AIA/NAS NASM63540/1 EN-Stud Self-Locking Flush Head Ribbed Clinch Type 
AIA/NAS NASM47195 EN-Rivets Blind Self-Plugging Preparation for and Installation of 
AIA/NAS NAS847 EN-Caps and Plugs Protective Dust and Moisture Seal 
AA ASM35 EN-Specifications for Aluminum Sheet Metal Work in Building Construction Construction Manual Series Section 5-Fourth Edition 
AIA/NAS NAS1833 EN-Insert Molded in Threaded Self-Locking Nonself-Locking Sandwich Panel-Rev 7 
AIA/NAS NAS823 EN-Cast Surface Comparison Standard-Rev 2 
AIA/NAS NAS621 EN-Fasteners Titanium Alloy Procurement Specification-Rev. 11 
AIA/NAS NAS596 EN-Nut - Rigid Tube Connector Corrosion Resistant Steel-Rev 5 
ANSI B71.1 EN-Consumer Turf Care Equipment Walk-Behind Mowers and Ride-On Machines with Mowers Safety Specifications 
AIA/NAS NAS1726 EN-Nut Self-Locking Captive Washer Shear Type 450 Degrees F and 800 Degrees F-Rev 3 
AIA/NAS NAS1330 EN-Nut Blind Rivet - Countersunk Head Internal THD Non-Locking (Free Running) or Self-Locking (Prevailing Torque)-Rev 10 
AIA/NAS NAS622 EN-Hook Support - Electronic Equipment Clamp (NAS 573)-Rev 2 
AIA/NAS NAS537 EN-Bushing Sleeve-Press Fit Undersize Inside Diameter-REV. 6 
AIA/NAS NAS1211 EN-Fitting Tie Down Strap End-Rev 2 
AIA/NAS NAS3426 EN-Electrical Harness - Cable Assemblies Packaging of-Rev. 1 
AIA/NAS NASM20605 EN-Rivet Blind Nonstructural 100 Degree Flush Head-Rev 1 
AIA/NAS NAS356 EN-Tube Assembly-Control Aluminum Alloy with Riveted Clevis and Threaded Rod Ends-Rev 6 
ISO 228-1 EN-Pipe Threads Where Pressure-Tight Joints Are Not Made on the Threads - Part 1: Dimensions Tolerances and Designation-Fourth Edition 
IPC 9191 EN-General Guidelines for Implementation of Statistical Process Control (SPC)-Supersedes IPC-PC-90: October 1990 
ISO 7810 EN-Identification cards Physical characteristics-Third Edition 
AGMA 6034-B92 EN-Practice for Enclosed Cylindrical Wormgear Speed Reducers and Gearmotors 
AIA/NAS NAS7100 EN-Recess Ribbed Cruciform Dimensions of Recess and Gages-Rev 8 
IPC 2221A EN-Generic Standard on Printed Board Design 
AIA/NAS NAS411 EN-Hazardous Materials Management Program-Rev 2 
AGMA 9005-E02 EN-Industrial Gear Lubrication-Supersedes AGMA 250.04 and AGMA 251.02 
AGMA 9002-B04 EN-Bores and Keyways for Flexible Couplings (Inch Series) 
ISO 594-1 EN-Conical Fittings with a 6 % (Luer) Taper for Syringes Needles and Certain Other Medical Equipment - Part 1: General Requirements-First Edition; CEN EN 20594-1: 1993 
AIA/NAS NAS1423 EN-Nut Plain Hexagon Drilled Jam Thin-Rev 2 
AIA/NAS NAS1400 EN-Rivet-Blind Self-Plugging Mechanically Locked Spindle-Rev 6 
AIA/NAS NASM20392 EN-Pin Straight. Headed Drilled Shank 
AIA/NAS NAS1301 EN-Screw Pan Head Assembled Washers-Rev 3 
AIA/NAS NAS836 EN-Plug - Protective Flared Tube Hose Assembly or MS33649 Boss 
AIA/NAS NASM45938/3 EN-Nut Plain Clinch and Nut Self-Locking Clinch (Self Clinching Knurled Collar 450 Degrees F and 600 Degrees F) 
AIA/NAS NA0151 EN-Insert Screw Thread Key Locked A286 Cres Heavy Duty Metric-Rev 1 
IPC TM-650 2.4.3 EN-Flexural Endurance Flexible Printed Wiring Materials-Revision D 
AIA/NAS NASM16491 EN-Grommet Metallic General Specification for 
AIA/NAS NAS1613 EN-Seal Element Packing Preformed Ethylene Propylene Rubber-Rev 5 
AIA/NAS NAS1097 EN-Rivet Solid 100 Deg. Flush Shear Head Aluminum Alloy Titanium Columbium Alloy-Rev 9 
AIA/NAS NAS1836 EN-Insert Molded in Blind Threaded Self-Locking Nonself-Locking Lightweight Sandwich Panel-Rev 8