DIN English - Paper Industries Ceramics and Glass Industries Collection
This collection contains documents from the following standards organization(s):
Deutsches Institut Fur Normung E.V.
Most Popular Standards from the DIN English - Paper Industries Ceramics and Glass Industries Collection
| DIN DIN EN ISO 1183-2 | EN-Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004) | |
| DIN DIN EN 356 | EN-Glass in building - Security glazing - Testing and classification of resistance against manual attack; English version of DIN EN 356 | |
| DIN DIN ISO 1629 | EN-Rubber and latices - Nomenclature (ISO 1629:1995) | |
| DIN DIN EN ISO 178 | EN-Plastics - Determination of flexural properties (ISO 178:2001 + AMD 1:2004) | |
| DIN DIN EN 204 | EN-Classification of thermoplastic wood adhesives for non-structural applications; English version of DIN EN 204 | |
| DIN DIN 55468-1 | EN-Corrugated fibreboard - Part 1: Requirements and testing | |
| DIN DIN 53505 | EN-Shore A and Shore D hardness testing of rubber | |
| DIN DIN 16945 | EN-Testing of resins hardeners and accelerators and catalyzed resins | |
| DIN DIN 16941 | EN-Thermoplastics extruded profiles; general tolerances of size form and orientation | |
| DIN DIN 53512 | EN-Determination the rebound resilience of rubber using the Schob pendulum | |
| DIN DIN ISO 815 | EN-Vulcanized and thermoplastic rubber - Determination of compression set at ambient elevated or low temperatures (ISO 815:1991 + Technical Cororigendum 1:1993) | |
| DIN DIN EN 1063 | EN-Glass in building - Security glazing - Testing and classification of resistance against bullet attack; English version of DIN EN 1063 | |
| DIN DIN 53513 | EN-Determination of the viscoelastic properties of elastomers on exposure to forced vibration at non-resonant frequencies | |
| DIN DIN 16946-2 | EN-Cured casting resins; types | |
| DIN DIN EN ISO 3001 | EN-Plastics - Epoxy compounds - Determination of epoxy equivalent (ISO 3001:1999) | |
| DIN DIN EN ISO 527-2 | EN-Determination of tensile properties of plastics - Test conditions for moulding and extrusion plastics (ISO 527-2:1993 including Corr 1:1994) | |
| DIN DIN EN 12150-1 | EN-Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description; English version of DIN EN 12150-1 | |
| DIN DIN EN 12600 | EN-Glass in building - Pendulum tests - Impact test method and classification for flat glass | |
| DIN DIN 53363 | EN-Determining the tear resistance of plastic film and sheeting by the trouser tear method | |
| DIN DIN 16749 | EN-Compression moulds and injection moulds; dimensional tolerances for moulding parts | |
| DIN DIN EN ISO 11469 | EN-Plastics - Generic identification and marking of plastics products (ISO 11469:2000); English version of DIN EN ISO 11469 | |
| DIN DIN 18820-4 | EN-Glass fibre reinforced unsaturated polyester (GF-UP) and phenacrylic (GF-PHA) resin structural composites - Testing and inspection | |
| DIN DIN EN ISO 1043-1 | EN-Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2001) | |
| DIN DIN 53428 | EN-Determination of the behaviour of cellular plastics when exposed to fluids vapours and solids | |
| DIN DIN 53497 | EN-Testing of Plastics; Hot Storage Test on Mouldings Made of Thermoplastic Moulding Materials without External Mechanical Stressing | |
| DIN DIN 53435 | EN-Testing of plastics; bending test and impact test on dynstat test pieces | |
| DIN DIN EN 1096-2 | EN-Glass in building - Coated glass - Part 2: Requirements and test methods for class A B and S coatings; English version of DIN EN 1096-2 | |
| DIN DIN 53293 | EN-Testing of sandwiches; Bending test | |
| DIN DIN 53424 | EN-Testing of Rigid Cellular Materials; Determination of Dimensional Stability at Elevated Temperatures with Flexural Load and with Compressive Load | |
| DIN DIN EN ISO 2555 | EN-Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield Test method (ISO 2555:1989) | |
| DIN DIN EN ISO 527-3 | EN-Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995 + Corr 1:1998 + Corr 2:2001) (includes Corrigendum AC:1998 + AC:2002) | |
| DIN DIN 12116 | EN-Testing of glass - Resistance to attack by a boiling aqueous solution of hydrochloric acid - Method of test and classification | |
| DIN DIN EN ISO 2114 Berichtigung 1 | EN-Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value (ISO 2114:2000); Corrigendum 1 to English version of DIN EN ISO 2114:2002-06 | |
| DIN DIN EN ISO 536 | EN-Determination of grammage of paper and board (ISO 536:1995) | |
| DIN DIN 53380-1 | EN-Determining the gas transmission rate of plastic film by the volumetric method | |
| DIN DIN 51032 | EN-Ceramics glass glass ceramics vitreous enamels; permissible limits for the release of lead and cadmium from articles intended for use in contact with foodstuffs | |
| DIN DIN 55468-2 | EN-Wet strength corrugated fibreboard - Part 2: Requirements and testing | |
| DIN DIN EN ISO 7823-1 | EN-Plastics - Poly(methyl methacrylate) sheets - Types dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003) | |
| DIN DIN EN ISO 1675 | EN-Plastics - Liquid resins - Determination of density by the pyknometer method (ISO 1675:1985) | |
| DIN DIN 16781-2 | EN-Plastics moulding materials; polyoxymethylene (POM) moulding materials; preparation of specimens and determination of their properties | |
| DIN DIN EN ISO 12543-4 | EN-Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:1998) | |
| DIN DIN ISO 813 | EN-Rubber vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90- peel method (ISO 813:1997) | |
| DIN DIN 1081 | EN-Refractory materials; rectangular refractory bricks; dimensions | |
| DIN DIN 40604-1 | EN-Vulcanized Fibre; Panels (Sheets) Sheeting Strips Tapes | |
| DIN DIN EN 1051-1 | EN-Glass in building - Glass blocks and glass pavers - Part 1: Definitions and description | |
| DIN DIN EN 1013-5 | EN-Light transmitting profiled plastic sheeting for single skin roofing - Part 5: Specific requirements test methods and performance of polymethylmethycrylate (PMMA) sheets; English version of DIN EN 1013-5 | |
| DIN DIN EN ISO 483 | EN-Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value (ISO 483:2005) | |
| DIN DIN EN ISO 182-2 | EN-Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 2: pH method (ISO | |
| DIN DIN EN ISO 3219 | EN-Determination of viscosity of polymers and resins in the liquid state or as emulsions or dispersions using a rotational viscometer with defined shear rate (ISO 3219:1993) | |
| DIN DIN ISO 34-1 | EN-Rubber vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser angle and crescent test pieces (ISO 34-1:2004) |
View Alphabetical Listing of Documents
- Documents: DIN DIN 10370 to DIN DIN 53529-2
- Documents: DIN DIN 53536 to DIN DIN EN 1096-2
- Documents: DIN DIN EN 1096-4 to DIN DIN EN 12788
- Documents: DIN DIN EN 1279-1 to DIN DIN EN 13733
- Documents: DIN DIN EN 13887 to DIN DIN EN 15307
- Documents: DIN DIN EN 15335 to DIN DIN EN 438-2
- Documents: DIN DIN EN 438-4 to DIN DIN EN 993-18
- Documents: DIN DIN EN 993-2 to DIN DIN EN ISO 12543-4
- Documents: DIN DIN EN ISO 12543-6 to DIN DIN EN ISO 15908
- Documents: DIN DIN EN ISO 1599 to DIN DIN EN ISO 2758
- Documents: DIN DIN EN ISO 2818 to DIN DIN EN ISO 534
- Documents: DIN DIN EN ISO 5659-1 to DIN DIN EN ISO 9988-1
- Documents: DIN DIN ISO 11093-1 to DIN DIN ISO 976