DIN German - Paper Industries Ceramics and Glass Industries Collection
This collection contains documents from the following standards organization(s): Deutsches Institut Fur Normung E.V.
| DIN DIN ISO 13542 | EN-Paper and board - Specification for internal diameters of cores for reels (ISO 13542:2006) | |
| DIN DIN ISO 13741-1 | EN-Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic); Determination of residual monomers and other organic components by capillary-column gas chromatography - Part 1: Direct liquid injecti | |
| DIN DIN ISO 13741-2 | EN-Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic); Determination of residual monomers and other organic components by capillary-column gas chromatography - Part 2: Headspace method (ISO | |
| DIN DIN ISO 13773 | EN-Rubber - Polychloroprene latex - Determination of alkalinity (ISO 13773:1997) | |
| DIN DIN ISO 1409 | EN-Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Determination of surface tension by the ring method (ISO 1409:2006) | |
| DIN DIN ISO 1431-1 | EN-(DRAFT) Rubber vulcanized or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing (ISO 1431-1:2004 + Amd. 1:2009) | |
| DIN DIN ISO 1431-3 | EN-(DRAFT) Rubber vulcanized or thermoplastic - Resistance to ozone cracking - Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers (ISO 1431-3:2000) | |
| DIN DIN ISO 1435 | EN-Rubber compounding ingredients - Carbon black (pelletized) - Determination of fines content (ISO 1435:1996) | |
| DIN DIN ISO 14359 | EN-Winter-sports equipment - Marking of parts made of polymer materials; identical with ISO 14359:1997 | |
| DIN DIN ISO 15754 | EN-Paper and board - Determination of z-directional tensile strength (ISO 15754:2009) | |
| DIN DIN ISO 1629 | EN-Rubber and latices - Nomenclature (ISO 1629:1995) | |
| DIN DIN ISO 1652 | EN-(DRAFT) Rubber latex - Determination of apparent viscosity by the Brookfield test method | |
| DIN DIN ISO 16915 | EN-Tools for moulding - Sprue pullers (ISO 16915:2003) | |
| DIN DIN ISO 171 | EN-Plastics - Determination of bulk factor of moulding materials (ISO 171:1980) | |
| DIN DIN ISO 1776 | EN-Glass; resistance to attack by hydrochloric acid at 100 °C; flame emission or flame atomic absorption spectrometric method; identical with ISO 1776 edition 1985 | |
| DIN DIN ISO 1802 | EN-Rubber latex natural concentrate - Determination of boric acid content (ISO 1802:1992) | |
| DIN DIN ISO 1817 | EN-Rubber vulcanized - Determination of the effect of liquids (ISO 1817:2005) | |
| DIN DIN ISO 1827 | EN-Rubber vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods (ISO 1827:2007) | |
| DIN DIN ISO 18898 | EN-Rubber - Calibration and verification of hardness testers (ISO 18898:2006) | |
| DIN DIN ISO 1924-3 | EN-Paper and board - Determination of tensile properties - Part 3: Constant rate of elongation method (100 mm/min) (ISO 1924-3:2005) | |
| DIN DIN ISO 2004 | EN-Natural rubber latex concentrate - Centrifuged or creamed ammonia-preserved types - Specification (ISO 2004:1997) | |
| DIN DIN ISO 2005 | EN-Rubber latex natural concentrate - Determination of sludge content (ISO 2005:1992 + Amd. 1:2006) | |
| DIN DIN ISO 2027 | EN-Natural rubber latex concentrate evaporated preserved - Specifications (ISO 2027:1990) | |
| DIN DIN ISO 2028 | EN-Synthetic rubber latex - Preparation of dry polymer (ISO 2028:1999) | |
| DIN DIN ISO 2115 | EN-Plastics - Polymer dispersions - Determination of white point temperature and minimum film-forming temperature (ISO 2115:1996) | |
| DIN DIN ISO 2285 | EN-Rubber vulcanized or thermoplastic - Determination of tension set under constant elongation and of tension set elongation and creep under constant tensile load (ISO 2285:2007) | |
| DIN DIN ISO 23529 | EN-Rubber - General procedures for preparing and conditioning test pieces for physical test methods (ISO 23529:2004) | |
| DIN DIN ISO 27588 | EN-Rubber vulcanized or thermoplastic - Determination of dead-load hardness using the very low rubber hardness (VLRH) scale (ISO 27588:2008) | |
| DIN DIN ISO 2965 | EN-Materials used as cigarette papers filter plug wrap and filter joining paper including materials having an oriented permeable zone - Determination of air permeability (ISO 2965:1997) | |
| DIN DIN ISO 3039 | EN-Corrugated fibreboard; determination of the grammage of the component papers after separation; identical with ISO 3039:1975 | |
| DIN DIN ISO 3260 | EN-Pulps; determiantion of chlorine consumption (degree of delignification); identical with ISO 3260 edition 1982 | |
| DIN DIN ISO 3302-1 | EN-Rubber - Tolerances for products - Part 1: Dimensional tolerances (ISO 3302-1:1996) | |
| DIN DIN ISO 3384 | EN-Rubber vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures (ISO 3384:2005) | |
| DIN DIN ISO 34-1 | EN-Rubber vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser angle and crescent test pieces (ISO 34-1:2004) | |
| DIN DIN ISO 34-1 Berichtigung 1 | EN-Rubber vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser angle and crescent test pieces (ISO 34-1:2004) Corrigenda to DIN ISO 34-1:2004-07 | |
| DIN DIN ISO 3451-2 | EN-Plastics; determination of ash; polyalkylene terephthalates; identical with ISO 3451-2:1984 | |
| DIN DIN ISO 3451-3 | EN-Plastics; determination of ash; unplasticized cellulose acetate; identical with ISO 3451-3:1984 | |
| DIN DIN ISO 35 | EN-Natural rubber latex concentrate - Determination of mechanical stability (ISO 35:2004 + Amd. 1:2006) | |
| DIN DIN ISO 3585 | EN-Borosilicate glass 3.3 - Properties (ISO 3585:1998) | |
| DIN DIN ISO 3689 | EN-Paper and board; determination of bursting strength after immersion in water; identical with ISO 3689:1983 | |
| DIN DIN ISO 3781 | EN-Paper and board - Determination of tensile strength after immersion in water; identical with ISO 3781:1983 | |
| DIN DIN ISO 4576 | EN-Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content) (ISO 4576:1996) | |
| DIN DIN ISO 458-2 | EN-Plastics - Determination of stiffness in torsion of flexible materials - Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride (ISO 458-2:1985) | |
| DIN DIN ISO 4638 | EN-Polymeric materials cellular flexible; determination of air flow permeability; identical with ISO 4638:1984 | |
| DIN DIN ISO 4649 | EN-Rubber vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2002) | |
| DIN DIN ISO 4655 | EN-Rubber - Reinforced styrene-butadiene latex - Determination of total bound styrene content (ISO 4655:1985) | |
| DIN DIN ISO 48 | EN-Rubber vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:2007) | |
| DIN DIN ISO 498 | EN-Natural rubber latex concentrate - Preparation of dry films (ISO 498:1992) | |
| DIN DIN ISO 506 | EN-Rubber latex natural concentrate - Determination of volatile fatty acid number (ISO 506:1992) | |
| DIN DIN ISO 5630-1 | EN-Paper and board; accelerated ageing; part 1: dry heat treatment at 105 °C; identical with ISO 5630-1:1991 | |
| DIN DIN ISO 5630-3 | EN-Paper and board - Accelerated ageing - Part 3: Moist heat treatment at 80 °C and 65 % relative humidity (ISO 5630-3:1996) | |
| DIN DIN ISO 5834-1 | EN-Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1: Powder form (ISO 5834-1:2005) | |
| DIN DIN ISO 5834-2 | EN-Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms (ISO 5834-2:2006) | |
| DIN DIN ISO 6133 | EN-Rubber and plastics - Analysis of multipeak traces obtained in determination of tear strength and adhesion strength (ISO 6133:1998) | |
| DIN DIN ISO 6474 | EN-Implants for surgery - Ceramic materials based on high purity alumina (ISO 6474:1994) | |
| DIN DIN ISO 6691 | EN-Thermoplastic for plain bearings - Classification and designation (ISO 6691:2000) | |
| DIN DIN ISO 695 | EN-Glass; resistance to attack by a boiling aqueous solution of mixed alkali; method of test and classification; identical with ISO 695:1991 | |
| DIN DIN ISO 705 | EN-Rubber latex - Determination of density between 5 °C and 40 °C (ISO 705:1994) | |
| DIN DIN ISO 706 | EN-Rubber latex - Determination of coagulum content (sieve residue) (ISO 706:2004) | |
| DIN DIN ISO 719 | EN-Glass; hydrolytic resistance of glass grains at 98 °C; method of test and classification; identical with ISO 719:1985 | |
| DIN DIN ISO 720 | EN-Glass; Hydrolytic resistance of glass grains at 121 °C; method of test and classification; identical with ISO 720:1985 | |
| DIN DIN ISO 7743 | EN-Rubber vulcanized or thermoplastic - Determination of compression stress-strain properties (ISO 7743:2004) | |
| DIN DIN ISO 7765-2 | EN-Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 2: Instrumented puncture test (ISO 7765-2:1994) | |
| DIN DIN ISO 7884-1 | EN-Glass - Viscosity and viscometric fixed points - Part 1: Principles for determining viscosity and viscometric fixed points (ISO 7884-1:1987) | |
| DIN DIN ISO 7884-2 | EN-Glass - Viscosity and viscometric fixed points - Part 2: Determination of viscosity by rotation viscometers (ISO 7884-2:1987) | |
| DIN DIN ISO 7884-3 | EN-Glass - Viscosity and viscometric fixed points - Part 3: Determination of viscosity by fibre elongation viscometer (ISO 7884-3:1987) | |
| DIN DIN ISO 7884-4 | EN-Glass - Viscosity and viscometric fixed points - Part 4: Determination of viscosity by beam bending (ISO 7884-4:1987) | |
| DIN DIN ISO 7884-5 | EN-Glass - Viscosity and viscometric fixed points - Part 5: Determination of working point by sinking bar viscometer (ISO 7884-5:1987) | |
| DIN DIN ISO 7884-6 | EN-Glass - Viscosity and viscometric fixed points - Part 6: Determination of softening point (ISO 7884-6:1987) | |
| DIN DIN ISO 7884-7 | EN-Glass - Viscosity and viscometric fixed points - Part 7: Determination of annealing point and strain point by beam bending (ISO 7884-7:1987) | |
| DIN DIN ISO 7884-8 | EN-Glass - Viscosity and viscometric fixed points - Part 8: Determination of (dilatometric) transformation temperature (ISO 7884-8:1987) | |
| DIN DIN ISO 7991 | EN-Glass - Determination of coefficient of mean linear thermal expansion (ISO 7991:1987) | |
| DIN DIN ISO 812 | EN-Rubber vulcanized or thermoplastic - Determination of low-temperature brittleness (ISO 812:2006) | |
| DIN DIN ISO 813 | EN-Rubber vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90° peel method (ISO 813:1997) | |
| DIN DIN ISO 815 | EN-Rubber vulcanized or thermoplastic - Determination of compression set at ambient elevated or low temperatures (ISO 815:1991 + ISO 815:1991/Cor.1:1993) | |
| DIN DIN ISO 815-1 | EN-(DRAFT) Rubber vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient elevated or low temperatures (ISO 815-1:2008) | |
| DIN DIN ISO 815-2 | EN-(DRAFT) Rubber vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures (ISO 815-2:2008) | |
| DIN DIN ISO 8226-1 | EN-Paper and board - Measurement of hygroexpansivity - Part 1: Hygroexpansivity up to a maximum relative humidity of 68 % (ISO 8226-1:1994) | |
| DIN DIN ISO 8296 | EN-Plastics - Film and sheeting - Determination of wetting tension (ISO 8296:2003) |