DIN German - Paper Industries Ceramics and Glass Industries Collection
This collection contains documents from the following standards organization(s): Deutsches Institut Fur Normung E.V.
| DIN DIN EN 572-8 | EN-Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut sizes; German version EN 572-8:2004 | |
| DIN DIN EN 572-9 | EN-Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard; German version EN 572-9:2004 | |
| DIN DIN EN 59 | EN-Glass Reinforced Plastics; Measurement of Hardness by Means of a Barcol Impressor | |
| DIN DIN EN 61331-2 | EN-Protective devices against diagnostic medical X-radiation - Part 2: Protective glass plates (IEC 61331-2:1994); German version EN 61331-2:2002 | |
| DIN DIN EN 623-1 | EN-Advanced technical ceramics - Monolithic ceramics; General and textural properties - Part 1: Determination of the presence of defects by dye penetration; German version EN 623-1:2006 | |
| DIN DIN EN 623-2 | EN-Advanced technical ceramics; monolithic ceramics; general and textural properties; part 2: determination of density and porosity; German version EN 623-2:1993 | |
| DIN DIN EN 623-3 | EN-Advanced technical ceramics - Monolithic ceramics; General and textural properties - Part 3: Determination of grain size and size distribution (characterized by the linear intercept method); German version EN 623-3:2 | |
| DIN DIN EN 623-4 | EN-Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness; German version EN 623-4:2004 | |
| DIN DIN EN 623-5 | EN-Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 5: Determination of phase volume fraction by evaluation of micrographs; German version EN 623-5:2009 | |
| DIN DIN EN 643 | EN-Paper and board - European list of standard grades of recovered paper and board; German version EN 643:2001 | |
| DIN DIN EN 645 | EN-Paper and board intended to come into contact with foodstuffs; preparation of a cold water extract; German version EN 645:1993 | |
| DIN DIN EN 646 | EN-Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board; German version EN 646:2006 | |
| DIN DIN EN 647 | EN-Paper and board intended to come into contact with foodstuffs; preparation of a hot water extract; German version EN 647:1993 | |
| DIN DIN EN 648 | EN-Paper and board intended to come into contact with foodstuffs - Determination of the fastness of fluorescent whitened paper and board; German version EN 648:2006 | |
| DIN DIN EN 658-1 | EN-Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile properties; German version EN 658-1:1998 | |
| DIN DIN EN 658-2 | EN-Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 2: Determination of compression properties; German version EN 658-2:2002 | |
| DIN DIN EN 658-3 | EN-Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 3: Determination of flexural strength; German version EN 658-3:2002 | |
| DIN DIN EN 658-4 | EN-Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens; German version EN | |
| DIN DIN EN 658-5 | EN-Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three-points); German version EN 658-5:200 | |
| DIN DIN EN 673 | EN-Glass in building - Determination of thermal transmittance (U value) - Calculation method (including Amendment A1:2000 + Amendment A2:2002); German version EN 673:1997 + A1:2000 + A2:2002 | |
| DIN DIN EN 674 | EN-Glass in building - Determination of the thermal transmittance (U value) - Guarded hot plate method; German version EN 674:1997 | |
| DIN DIN EN 675 | EN-Glass in building - Determination of the thermal transmittance (U value) - Heat flow meter method; German version EN 675:1997 | |
| DIN DIN EN 725-1 | EN-Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina; German version EN 725-1:2007 | |
| DIN DIN EN 725-10 | EN-Advanced technical ceramics - Methods of test for ceramic powders - Part 10: Determination of compaction properties; German version EN 725-10:2007 | |
| DIN DIN EN 725-11 | EN-Advanced technical ceramics - Methods of test for ceramic powders - Part 11: Determination of densification on natural sintering; German version EN 725-11:2006 | |
| DIN DIN EN 725-12 | EN-Advanced technical ceramics - Methods of test for ceramic powders - Part 12: Chemical analysis of zirconia; German version EN 725-12:2001 | |
| DIN DIN EN 725-2 | EN-Advanced technical ceramics - Methods of test for ceramic powders - Part 2: Determination of impurities in barium titanate; German version EN 725-2:2007 | |
| DIN DIN EN 725-3 | EN-Advanced technical ceramics - Methods of test for ceramic powders - Part 3: Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas; German version EN 725-3:2007 | |
| DIN DIN EN 725-4 | EN-Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis; German version EN 725-4:2006 | |
| DIN DIN EN 725-5 | EN-Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of the particle size distribution; German version EN 725-5:2007 | |
| DIN DIN EN 725-8 | EN-Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density; German version EN 725-8:2006 | |
| DIN DIN EN 725-9 | EN-Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of untapped bulk density; German version EN 725-9:2006 | |
| DIN DIN EN 820-1 | EN-Advanced technical ceramics - Methods of testing monolithic ceramics; Thermo-mechanical properties - Part 1: Determination of flexural strength at elevated temperatures; German version EN 820-1:2002 | |
| DIN DIN EN 820-2 | EN-Advanced technical ceramics - Methods of test for monolithic ceramics - Thermo-mechanical properties - Part 2: Determination of self-loaded deformation; German version EN 820-2:2003 | |
| DIN DIN EN 820-3 | EN-Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 3: Determination of resistance to thermal shock by water quenching; German version EN 820-3:2004 | |
| DIN DIN EN 820-4 | EN-Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 4: Determination of flexural creep deformation at elevated temperatures; German version EN 820-4:2009 | |
| DIN DIN EN 820-5 | EN-Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures; German version EN 820-5:2009 | |
| DIN DIN EN 821-1 | EN-Advanced technical ceramics - Monolithic ceramics - Thermophysical properties - Part 1: Determination of thermal expansion; German version EN 821-1:1995 | |
| DIN DIN EN 821-2 | EN-Advanced technical ceramics - Monolithic ceramics thermo-physical properties - Part 2: Determination of thermal diffusity by the laser flash (or heat pulse) method; German version EN 821-2:1997 | |
| DIN DIN EN 821-3 | EN-Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 3: Determination of specific heat capacity; German version EN 821-3:2005 | |
| DIN DIN EN 827 | EN-Adhesives - Determination of conventional solids content and constant mass solids content; German version EN 827:2005 | |
| DIN DIN EN 828 | EN-Adhesives - Wettability - Determination by measurement of contact angle and critical surface tension of solid surface; German version EN 828:1997 | |
| DIN DIN EN 843-1 | EN-Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength; German version EN 843-1:2006 | |
| DIN DIN EN 843-2 | EN-Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus shear modulus and Poisson's ratio; German version EN 843-2:2006 | |
| DIN DIN EN 843-3 | EN-Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests; Germ | |
| DIN DIN EN 843-4 | EN-Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers Knoop and Rockwell superficial hardness; German version EN 843-4:2005 | |
| DIN DIN EN 843-5 | EN-Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 5: Statistical analysis; German version EN 843-5:2006 | |
| DIN DIN EN 843-5 Berichtigung 1 | EN-Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 5: Statistical analysis; German version EN 843-5:2006 Corrigenda to DIN EN 843-5:2007-03 | |
| DIN DIN EN 843-6 | EN-Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 6: Guidance for fractographic investigation; German version EN 843-6:2009 | |
| DIN DIN EN 843-7 | EN-(DRAFT) Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 7: C-ring tests; German version FprEN 843-7:2009 | |
| DIN DIN EN 843-8 | EN-(DRAFT) Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 8: Guidelines for conducting proof tests; German version FprEN 843-8:2009 | |
| DIN DIN EN 920 | EN-Paper and board intended to come into contact with foodstuffs - Determination of dry matter content in an aqueous extract; German version EN 920:2000 | |
| DIN DIN EN 923 | EN-Adhesives - Terms and definitions; German version EN 923:2005+A1:2008 | |
| DIN DIN EN 924 | EN-Adhesives - Solvent-borne and solvent-free adhesives - Determination of flashpoint; German version EN 924:2003 | |
| DIN DIN EN 993-1 | EN-Methods of test for dense shaped refractory products - Part 1: Determination of bulk density apparent porosity and true porosity; German version EN 993-1:1995 | |
| DIN DIN EN 993-10 | EN-Methods of test for dense shaped refractory products - Part 10: Determination of permanent change in dimensions on heating; German version EN 993-10:1997 | |
| DIN DIN EN 993-11 | EN-Methods of test for dense shaped refractory products - Part 11: Determination of resistance to thermal shock; German version EN 993-11:2007 | |
| DIN DIN EN 993-12 | EN-Methods of test for dense shaped refractory products - Part 12: Determination of pyrometric cone equivalent (refractoriness); German version EN 993-12:1997 | |
| DIN DIN EN 993-13 | EN-Methods of test for dense shaped refractory products - Part 13: Specification for pyrometric reference cones for laboratory use; German version EN 993-13:1995 | |
| DIN DIN EN 993-14 | EN-Methods of testing dense shaped refractory products - Part 14: Determination of thermal conductivity by the hot-wire (cross-array) method; German version EN 993-14:1998 | |
| DIN DIN EN 993-14 | EN-(DRAFT) Methods of testing insulating and dense shaped refractory products - Part 14: Determination of thermal conductivity by the hot-wire (cross-array) and resistance thermometer methods; German version prEN 993-14 | |
| DIN DIN EN 993-15 | EN-Methods of test for dense shaped refractory products - Part 15: Determination of thermal conductivity by the hot-wire (parallel) method; German version EN 993-15:2005 | |
| DIN DIN EN 993-16 | EN-Dense shaped refractory products - Methods of test - Part 16: Determination of resistance to sulphuric acid; German version EN 993-16:1995 | |
| DIN DIN EN 993-18 | EN-Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002 | |
| DIN DIN EN 993-19 | EN-Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method; German version EN 993-19:2004 | |
| DIN DIN EN 993-2 | EN-Methods of test for dense shaped refractory products - Part 2: Determination of true density; German version EN 993-2:1995 | |
| DIN DIN EN 993-2/A1 | EN-Methods of test for dense shaped refractory products - Part 2: Determination of true density; German version EN 993-2:1995/A1:2003 | |
| DIN DIN EN 993-3 | EN-Methods of test for dense shaped refractory products - Part 3: Test methods for carbon-containing refractories; German version EN 993-3:1997 | |
| DIN DIN EN 993-4 | EN-Methods of test for dense shaped refractory products - Part 4: Determination of permeability to gases; German version EN 993-4:1995 | |
| DIN DIN EN 993-5 | EN-Methods of test for dense shaped refractory products - Part 5: Determination of cold crushing strength; German version EN 993-5:1998 | |
| DIN DIN EN 993-6 | EN-Methods of test for dense shaped refractory products - Part 6: Determination of moduls of rupture at ambient temperature; German version EN 993-6:1995 | |
| DIN DIN EN 993-7 | EN-Methods of test for dense shaped refractory products - Part 7: Determination of modulus of rupture at elevated temperatures; German version EN 993-7:1998 | |
| DIN DIN EN 993-9 | EN-Methods of testing dense shaped refractory products - Part 9: Determination of creep in compression; German version EN 993-9:1997 | |
| DIN DIN EN ISO 10058-1 | EN-Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 1: Apparatus reagents dissolution and determination of gravimetric silica (ISO 10058-1:2008); Ge | |
| DIN DIN EN ISO 10058-2 | EN-Chemical analysis of magnesites and dolomites refractory products (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis (ISO 10058-2:2008); German version EN ISO 10058-2:2008 | |
| DIN DIN EN ISO 10058-3 | EN-Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission | |
| DIN DIN EN ISO 10066 | EN-Flexible cellular polymeric materials - Determination of creep in compression (ISO 10066:1991); German version EN ISO 10066:1997 | |
| DIN DIN EN ISO 10081-1 | EN-Classification of dense shaped refractory products - Part 1: Alumina-silica (ISO 10081-1:2003); German version EN ISO 10081-1:2005 | |
| DIN DIN EN ISO 10081-2 | EN-Classification of dense shaped refractory products - Part 2: Basic products containing less than 7 % residual carbon (ISO 10081-2:2003); German version EN ISO 10081-2:2005 |