DIN English - Metrology and Measurement Testing Energy Image Technology Collection
This collection contains documents from the following standards organization(s): Deutsches Institut Fur Normung E.V.
| DIN DIN EN 13741 | EN-Thermal performance acceptance testing of mechanical draught series wet cooling towers | |
| DIN DIN EN 13771-1 | EN-Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors | |
| DIN DIN EN 13771-2 | EN-Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units | |
| DIN DIN EN 13925-1 | EN-Non-destructive testing - X-ray diffraction from polycristalline and amorphous material - Part 1: General principles | |
| DIN DIN EN 13925-2 | EN-Non-destructive testing - X-ray diffraction from polycristalline and amorphous material - Part 2: Procedures | |
| DIN DIN EN 13925-3 | EN-Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments | |
| DIN DIN EN 13927 | EN-Non-destructive testing - Visual testing - Equipment | |
| DIN DIN EN 1397 | EN-Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance | |
| DIN DIN EN 14096-1 | EN-Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions quantitative measurements of image quality parameters standard reference film and qualitative control | |
| DIN DIN EN 14096-2 | EN-Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements | |
| DIN DIN EN 14127 | EN-Non-destructive testing - Ultrasonic thickness measurement | |
| DIN DIN EN 14222 | EN-Stainless steel shell boilers | |
| DIN DIN EN 14255-1 | EN-Measurement and assessment of personal exposures to incoherent optical radiation - Part 1: Ultraviolet radiation emitted by artificial sources in the workplace | |
| DIN DIN EN 14255-2 | EN-Measurement and assessment of personal exposures to incoherent optical radiation - Part 2: Visible and infrared radiation emitted by artificial sources in the workplace | |
| DIN DIN EN 14255-3 | EN-Measurement and assessment of personal exposures to incoherent optical radiation - Part 3: UV-Radiation emitted by the sun | |
| DIN DIN EN 14255-4 | EN-Measurement and assessment of personal exposures to incoherent optical radiation - Part 4: Terminology and quantities used in UV- visible and IR-exposure measurements | |
| DIN DIN EN 14276-1 | EN-Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements | |
| DIN DIN EN 14276-2 | EN-Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements | |
| DIN DIN EN 1434-1 | EN-Heat meters - Part 1: General requirements | |
| DIN DIN EN 1434-2 | EN-Heat meters - Part 2: Constructional requirements | |
| DIN DIN EN 1434-2 Berichtigung 1 | EN-Heat meters - Part 2: Constructional requirements Corrigendum 1 to English version of DIN EN 1434-2:2007-05 | |
| DIN DIN EN 1434-3 | EN-Heat meters - Part 3: Data exchange and interfaces; English version EN 1434-3:2008 | |
| DIN DIN EN 1434-4 | EN-Heat meters - Part 4: Pattern approval tests | |
| DIN DIN EN 1434-5 | EN-Heat meters - Part 5: Initial verification tests | |
| DIN DIN EN 1434-6 | EN-Heat meters - Part 6: Installation commissioning operational monitoring and maintenance | |
| DIN DIN EN 14366 | EN-Laboratory measurement of noise from waste water installations | |
| DIN DIN EN 14462 | EN-Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 (includes Amendment A1:2009) | |
| DIN DIN EN 14571 | EN-Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method | |
| DIN DIN EN 14584 | EN-Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources | |
| DIN DIN EN 14597 | EN-Temperature control devices and temperature limiters for heat generating systems | |
| DIN DIN EN 14705 | EN-Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers | |
| DIN DIN EN 14784-1 | EN-Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 1: Classification of systems | |
| DIN DIN EN 14784-2 | EN-Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays | |
| DIN DIN EN 14866 | EN-Vitreous and porcelain enamels - Regenerative enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications | |
| DIN DIN EN 1501-4 | EN-Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles | |
| DIN DIN EN 15036-1 | EN-Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators | |
| DIN DIN EN 15036-2 | EN-Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2: Flue gas noise emissions at the outlet of the heat generator | |
| DIN DIN EN 15042-1 | EN-Thickness measurement of coatings and characterization of surfaces with surface waves - Part 1: Guide to the determination of elastic constants density and thickness of films by laser induced surface acoustic waves | |
| DIN DIN EN 15042-2 | EN-Thickness measurement of coatings and characterization of surfaces with surface waves - Part 2: Guide to the thickness measurement of coatings by photothermic method | |
| DIN DIN EN 1518 | EN-Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors | |
| DIN DIN EN 15218 | EN-Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling - Terms definitions test conditions test methods and requirements | |
| DIN DIN EN 15302 | EN-Railway applications - Method for determining the equivalent conicity | |
| DIN DIN EN 15305 | EN-Non-destructive testing - Test method for residual stress analysis by X-ray diffraction | |
| DIN DIN EN 15305 Berichtigung 1 | EN-Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; Corrigendum 1 to English version of DIN EN 15305:2009-01 | |
| DIN DIN EN 15316-4-3 | EN-Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-3: Heat generation systems thermal solar systems | |
| DIN DIN EN 15316-4-6 | EN-Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-6: Heat generation systems photovoltaic systems | |
| DIN DIN EN 15317 | EN-Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment | |
| DIN DIN EN 15450 | EN-Heating systems in buildings - Design of heat pump heating systems | |
| DIN DIN EN 15461 | EN-Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements | |
| DIN DIN EN 15461/A1 | EN-(DRAFT) Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements; German and English version EN 15461:2008/FprA1:2010 | |
| DIN DIN EN 15495 | EN-Non Destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources | |
| DIN DIN EN 1557 | EN-Surface active agents - Colorimetric characterization of optically clear coloured liquids (products) as X Y Z tristimulus values in transmission; German version EN 1557:1996 | |
| DIN DIN EN 15610 | EN-Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation | |
| DIN DIN EN 15744 | EN-Film identification - Minimum set of metadata for cinematographic works | |
| DIN DIN EN 15856 | EN-Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid | |
| DIN DIN EN 15857 | EN-Non-destructive testing - Acoustic emission - Testing of fibre-reinforced polymers - Specific methodology and general evaluation criteria | |
| DIN DIN EN 1593 | EN-Non-destructive testing - Bubble emission techniques | |
| DIN DIN EN 16001 | EN-Energy management systems - Requirements with guidance for use | |
| DIN DIN EN 16018 | EN-(DRAFT) Non destructive testing - Terminology - Terms used in ultrasonic testing with phased arrays; German and English version prEN 16018:2009 | |
| DIN DIN EN 1679-1 | EN-Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines; German version EN 1679-1:1997 | |
| DIN DIN EN 1736 | EN-Refrigerating systems and heat pumps - Flexible pipe elements vibration isolators expansion joints and non-metallic tubes - Requirements design and installation | |
| DIN DIN EN 1779 | EN-Non-destructive testing - Leak testing - Criteria for method and technique selection | |
| DIN DIN EN 1793-1 | EN-Road traffic noise devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption | |
| DIN DIN EN 1793-2 | EN-Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation | |
| DIN DIN EN 1793-3 | EN-Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 3: Normalized traffic noise spectrum | |
| DIN DIN EN 1834-1 | EN-Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmos | |
| DIN DIN EN 1834-2 | EN-Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptibl | |
| DIN DIN EN 1834-3 | EN-Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres; En | |
| DIN DIN EN 1861 | EN-Refrigerating systems and heat pumps - System flow diagrams and piping instrument diagrams - Layout and symbols | |
| DIN DIN EN 1915-4 | EN-Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction (includes Amendment A1:2009) | |
| DIN DIN EN 225-1 | EN-Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 1: Oil burner pumps | |
| DIN DIN EN 225-2 | EN-Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 2: Oil burner motors | |
| DIN DIN EN 230 | EN-Automatic burner control systems for oil burners | |
| DIN DIN EN 24185 | EN-Measurement of liqid flow in closed conduits; weighing method (ISO 4185:1980); German version EN 24185:1993 | |
| DIN DIN EN 247 | EN-Heat exchangers - Terminology | |
| DIN DIN EN 255-3 | EN-Air conditioners liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 3: Testing and requirements for marking for sanitary hot water units (including Corrigendum AC:1997 | |
| DIN DIN EN 25580 | EN-Non-destructive testing; industrial radiographic illuminators; minimum requirements (ISO 5580:1985); german version EN 25580:1992 | |
| DIN DIN EN 257 | EN-Mechanical thermostats for gas-burning appliances | |
| DIN DIN EN 267 | EN-Automatic forced draught burners for liquid fuels |