DIN German - Metrology and Measurement Testing Energy Image Technology Collection
This collection contains documents from the following standards organization(s): Deutsches Institut Fur Normung E.V.
| DIN DIN EN ISO 10534-2 Berichtigung 1 | EN-Acoustics - Determination of sound absorption coefficient and impedance in impedance tubes - Part 2: Transfer-function method (ISO 10534-2:1998); German version EN ISO 10534-2:2001 Corrigenda to DIN EN ISO 10534-2:2 | |
| DIN DIN EN ISO 10846-1 | EN-Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:2008); German version EN ISO 10846-1:2008 | |
| DIN DIN EN ISO 10846-2 | EN-Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory mo | |
| DIN DIN EN ISO 10846-3 | EN-Acoustics and vibration - Laboratory measurement of the vibro-acoustic properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motio | |
| DIN DIN EN ISO 10846-4 | EN-Acoustics and vibration - Laboratory measurement of the vibro-acoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than elastic supports for translatory motion (ISO 10846-4 | |
| DIN DIN EN ISO 10846-5 | EN-Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient suppo | |
| DIN DIN EN ISO 1101 | EN-Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form orientation location and run-out (ISO 1101:2004); German version EN ISO 1101:2005 | |
| DIN DIN EN ISO 11102-1 | EN-Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997); German version EN ISO 11102-1:2009 | |
| DIN DIN EN ISO 11102-2 | EN-Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997); German version EN ISO 11102-2:2009 | |
| DIN DIN EN ISO 11137-3 | EN-Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects (ISO 11137-3:2006); German version EN ISO 11137-3:2006 | |
| DIN DIN EN ISO 1119 | EN-(DRAFT) Geometrical Product Specifications (GPS) - Series of conical tapers and taper angles (ISO/DIS 1119:2010); German version prEN ISO 1119:2010 | |
| DIN DIN EN ISO 1119 | EN-Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:1998); German version EN ISO 1119:2002 | |
| DIN DIN EN ISO 11200 | EN-Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1 | |
| DIN DIN EN ISO 11201 | EN-(DRAFT) Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane wit | |
| DIN DIN EN ISO 11201 | EN-Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflect | |
| DIN DIN EN ISO 11202 | EN-(DRAFT) Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO/DIS | |
| DIN DIN EN ISO 11202 | EN-Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ (ISO 11202:1995); German version EN ISO | |
| DIN DIN EN ISO 11203 | EN-Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995); German version EN | |
| DIN DIN EN ISO 11204 | EN-Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections (ISO 11204:1995 in | |
| DIN DIN EN ISO 11204 | EN-(DRAFT) Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO/DIS 112 | |
| DIN DIN EN ISO 11205 | EN-Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (IS | |
| DIN DIN EN ISO 11546-1 | EN-Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995); German version EN ISO 11546-1:2009 | |
| DIN DIN EN ISO 11546-2 | EN-Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995); German version EN ISO 11546-2:2009 | |
| DIN DIN EN ISO 11553-3 | EN-(DRAFT) Safety of machinery - Laser processing machines - Part 3: Safety requirements for noise reduction and noise measurement methods for laser processing machines and hand-held laser processing devices and associa | |
| DIN DIN EN ISO 11562 | EN-Geometrical Product Specifications (GPS) - Surface texture: Profile method - Metrological characteristics of phase correct filters (ISO 11562:1996); German version EN ISO 11562:1997 | |
| DIN DIN EN ISO 11688-1 | EN-Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995); German version EN ISO 11688-1:2009 | |
| DIN DIN EN ISO 11688-2 | EN-Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998); German version EN ISO 11688-2:2000 | |
| DIN DIN EN ISO 11689 | EN-Acoustics - Procedure for the comparison of noise emission-data for machinery and equipment (ISO 11689:1996); German version EN ISO 11689:1996 | |
| DIN DIN EN ISO 11689 Berichtigung 1 | EN-Acoustics - Procedure for the comparison of noise emission-data for machinery and equipment (ISO 11689:1996); German version EN ISO 11689:1996 Corrigendum to DIN EN ISO 11689:1997-03; German version EN ISO 11689:199 | |
| DIN DIN EN ISO 11690-1 | EN-Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies (ISO 11690-1:1996); German version EN ISO 11690-1:1996 | |
| DIN DIN EN ISO 11690-2 | EN-Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures (ISO 11690-2:1996); German version EN ISO 11690-2:1996 | |
| DIN DIN EN ISO 11690-3 | EN-Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 3: Sound propagation and noise prediction in workrooms (ISO/TR 11690-3:1997); German version EN ISO 11690-3:1998 | |
| DIN DIN EN ISO 11819-1 | EN-Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical pass-by method (ISO 11819-1:1997); German version EN ISO 11819-1:2001 | |
| DIN DIN EN ISO 11820 | EN-Acoustics - Measurements on silencers in situ (ISO 11820:1996); German version EN ISO 11820:1996 | |
| DIN DIN EN ISO 11821 | EN-Acoustics - Measurement of the in situ sound attenuation of a removable screen (ISO 11821:1997); German version EN ISO 11821:1997 | |
| DIN DIN EN ISO 11904-1 | EN-Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 1: Technique using microphone in real ear (MIRE-technique) (ISO 11904-1:2002); German version EN ISO 11904-1:2002 | |
| DIN DIN EN ISO 11904-2 | EN-Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 2: Technique using a manikin (ISO 11904-2:2004); German version EN ISO 11904-2:2004 | |
| DIN DIN EN ISO 11957 | EN-Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996); German version EN ISO 11957:2009 | |
| DIN DIN EN ISO 12001 | EN-Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996); German version EN ISO 12001:2009 | |
| DIN DIN EN ISO 12001 Beiblatt 1 | EN-(DRAFT) Acoustics - Noise emitted by machinery and equipment - Guideline for the selection of a suitable basic measurement method for the determination of the noise emission of a machine | |
| DIN DIN EN ISO 12085 | EN-Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996); German version EN ISO 12085:1997 | |
| DIN DIN EN ISO 12085 Berichtigung 1 | EN-Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996); German version EN ISO 12085:1997 Corrigendum to DIN EN ISO 12085:1998-05; German version EN ISO 12085:1 | |
| DIN DIN EN ISO 12179 | EN-Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2000); German version EN ISO 12179:2000 | |
| DIN DIN EN ISO 12179 Berichtigung 1 | EN-Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2000); German version EN ISO 12179:2000 Corrigendum to DIN EN ISO 12179:2000-11; Ge | |
| DIN DIN EN ISO 12180-1 | EN-(DRAFT) Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO/DIS 12180-1:2009); German version prEN ISO 12180-1:2009 | |
| DIN DIN EN ISO 12180-2 | EN-(DRAFT) Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO/DIS 12180-2:2009); German version prEN ISO 12180-2:2009 | |
| DIN DIN EN ISO 12181-1 | EN-(DRAFT) Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/DIS 12181-1:2009); German version prEN ISO 12181-1 | |
| DIN DIN EN ISO 12181-2 | EN-(DRAFT) Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO/DIS 12181-2:2009); German version prEN ISO 12181-2 | |
| DIN DIN EN ISO 12241 | EN-Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:2008); German version EN ISO 12241:2008 | |
| DIN DIN EN ISO 12706 | EN-Non-destructive testing - Penetrant testing - Vocabulary (ISO 12706:2009); Trilingual version EN ISO 12706:2009 | |
| DIN DIN EN ISO 12718 | EN-Non-destructive testing - Eddy current testing - Vocabulary (ISO 12718:2008); Trilingual version EN ISO 12718:2008 | |
| DIN DIN EN ISO 12780-1 | EN-(DRAFT) Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO/DIS 12780-1:2009); German version prEN ISO 12780-1 | |
| DIN DIN EN ISO 12780-2 | EN-(DRAFT) Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO/DIS 12780-2:2009); German version prEN ISO 12780-2:2009 | |
| DIN DIN EN ISO 12781-1 | EN-(DRAFT) Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO/DIS 12781-1:2009); German version prEN ISO 12781-1 | |
| DIN DIN EN ISO 12781-2 | EN-(DRAFT) Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO/DIS 12781-2:2009); German version prEN ISO 12781-2:2009 | |
| DIN DIN EN ISO 1302 | EN-Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002); German version EN ISO 1302:2002 | |
| DIN DIN EN ISO 1302 Berichtigung 1 | EN-Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002); German version EN ISO 1302:2002 Corrigendum to DIN EN ISO 1302:2002-06 | |
| DIN DIN EN ISO 13102 | EN-(DRAFT) Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial gauges (electronic digital) - Design and metrological characteristics (ISO/DIS 13102); German version prEN ISO 13102:2009 | |
| DIN DIN EN ISO 13225-1 | EN-(DRAFT) Geometrical product specifications (GPS) - Dimensional measuring instruments; Height gauges - Part 1: Simple height gauges; Design and metrological characteristics (ISO/DIS 13225-1:2007); German version prEN | |
| DIN DIN EN ISO 13385-1 | EN-(DRAFT) Geometrical product specifications (GPS) - Dimensional measuring equipments - Part 1: Callipers; Design and metrological requirements (ISO/DIS 13385-1.2:2007); German version prEN ISO 13385-1.2:2007 | |
| DIN DIN EN ISO 13385-2 | EN-(DRAFT) Geometrical product specifications (GPS) - Dimensional measuring equipments - Part 2: Calliper depth gauges; Design and metrological requirements (ISO/DIS 13385-2.2:2007); German version prEN ISO 13385-2.2:20 | |
| DIN DIN EN ISO 13473-1 | EN-Characterization of pavement texture by use of surface profiles - Part 1: Determination of Mean Profile Depth (ISO 13473-1:1997); German version EN ISO 13473-1:2004 | |
| DIN DIN EN ISO 13565-1 | EN-Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996); German version | |
| DIN DIN EN ISO 13565-2 | EN-Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996) | |
| DIN DIN EN ISO 13565-3 | EN-Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve (ISO 13565-3:1998); | |
| DIN DIN EN ISO 13696 | EN-Optics and optical instruments - Test methods for radiation scattered by optical components (ISO 13696:2002); German version EN ISO 13696:2002 | |
| DIN DIN EN ISO 14163 | EN-Acoustics - Guidelines for noise control by silencers (ISO 14163:1998); German version EN ISO 14163:1998 | |
| DIN DIN EN ISO 14253-1 | EN-Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformance or non-conformance with specifications (ISO 14253-1:1998); G | |
| DIN DIN EN ISO 14253-1 Beiblatt 1 | EN-Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Guide to the estimation of uncertainty in GPS measurement in calibration of measuring equipment and in pro | |
| DIN DIN EN ISO 14253-2 | EN-(DRAFT) Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guide to the estimation of uncertainty in GPS measurement in calibration of measuring equi | |
| DIN DIN EN ISO 14253-3 | EN-(DRAFT) Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO/DIS 14253-3: | |
| DIN DIN EN ISO 14257 | EN-Acoustics - Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance (ISO 14257:2001); German version EN ISO 14257:2001 | |
| DIN DIN EN ISO 14314 | EN-Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004); German version EN ISO 14314:2009 | |
| DIN DIN EN ISO 14405-1 | EN-(DRAFT) Geometrical Product Specification (GPS) - Dimensional Tolerancing - Part 1: Linear Sizes (ISO/DIS 14405-1:2009); German version prEN ISO 14405-1:2009 | |
| DIN DIN EN ISO 14405-2 | EN-(DRAFT) Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO/DIS 14405-2:2010); German version prEN ISO 14405-2:2010 | |
| DIN DIN EN ISO 14406 | EN-(DRAFT) Geometrical product specifications (GPS) - Data Extraction (ISO/DIS 14406:2008); German version prEN ISO 14406:2008 | |
| DIN DIN EN ISO 14509-1 | EN-Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measurement procedures (ISO 14509-1:2008); German version EN ISO 14509-1:2008 | |
| DIN DIN EN ISO 14509-2 | EN-Small craft - Airborne sound emitted by powered recreational craft - Part 2: Sound assessment using reference craft (ISO 14509-2:2006); German version EN ISO 14509-2:2006 | |
| DIN DIN EN ISO 14509-3 | EN-Small craft - Airborne sound emitted by powered recreational craft - Part 3: Sound assessment using calculation and measurement procedures (ISO 14509-3:2009); German version EN ISO 14509-3:2009 |