DIN English - Metallurgy Collection
This collection contains documents from the following standards organization(s): Deutsches Institut Fur Normung E.V.
| DIN DIN EN 10324 Berichtigung 1 | EN-Steel wire and wire products - Hose reinforcement wire; Corrigendum 1 to English version of DIN EN 10324:2004-11 | |
| DIN DIN EN 10325 | EN-Steel - Determination of yield strenght increase by the effect of heat treatment (Bake-Hardening-Index) | |
| DIN DIN EN 10328 | EN-Iron and steel - Determination of the conventional depth of hardening after surface heating | |
| DIN DIN EN 10333 | EN-Steel for packaging - Flat steel products intended for use in contact with foodstuffs products and beverages for human and animal consumption - Tin coated steel (tinplate) | |
| DIN DIN EN 10334 | EN-Steel for packaging - Flat steel products intended for use in contact with foodstuffs products and beverages for human and animal consumption - Non-coated steel (blackplate) | |
| DIN DIN EN 10335 | EN-Steel for packaging - Flat steel products intended for use in contact with foodstuffs products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel | |
| DIN DIN EN 10340 | EN-Steel castings for structural uses | |
| DIN DIN EN 10340 Berichtigung 1 | EN-Steel castings for structural uses; Corrigendum 1 to English version of DIN EN 10340:2008-01 | |
| DIN DIN EN 10341 | EN-Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state | |
| DIN DIN EN 10343 | EN-Steels for quenching and tempering for construction purposes - Technical delivery conditions | |
| DIN DIN EN 10346 | EN-Continuously hot-dip coated steel flat products - Technical delivery conditions | |
| DIN DIN EN 10349 | EN-Steel castings - Austenitic manganese steel castings | |
| DIN DIN EN 1172 | EN-Copper and copper alloy sheet and strip for building purposes | |
| DIN DIN EN 1173 | EN-Copper and copper alloys - Material condition designation | |
| DIN DIN EN 1179 | EN-Zinc and zinc alloys - Primary zinc | |
| DIN DIN EN 12020-1 | EN-Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery | |
| DIN DIN EN 12020-2 | EN-Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form | |
| DIN DIN EN 12060 | EN-Zinc and zinc alloys - Method of sampling - Specifications | |
| DIN DIN EN 12163 | EN-Copper and copper alloys - Rod for general purposes | |
| DIN DIN EN 12164 | EN-Copper and copper alloys - Rod for free machining purposes (includes amendment A1:2000); English version of DIN EN 12164:1998 + A1:2000 | |
| DIN DIN EN 12165 | EN-Copper and copper alloys - Wrought and unwrought forging stock | |
| DIN DIN EN 12166 | EN-Copper and copper alloys - Wire for general purposes | |
| DIN DIN EN 12167 | EN-Copper and copper alloys - Profiles and rectangular bar for general purposes | |
| DIN DIN EN 12168 | EN-Copper and copper alloys - Hollow rod for free machining purposes (includes amendment A1:2000); English version of DIN EN 12168:1998 + A1:2000 | |
| DIN DIN EN 12258-1 | EN-Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms; Trilingual version EN 12258-1:1998 | |
| DIN DIN EN 12258-2 | EN-Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis; Trilingual version EN 12258-2:2004 | |
| DIN DIN EN 12258-3 | EN-Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap; Trilingual version EN 12258-3:2003 | |
| DIN DIN EN 12258-4 | EN-Aluminium and aluminium alloys - Terms and definitions - Part 4: Residues of the aluminium industry; Trilingual version EN 12258-4:2004 | |
| DIN DIN EN 12373-1 | EN-Aluminium and aluminium alloys - Anodizing - Part 1: Method for specifying decorative and protective anodic oxidation coatings on aluminium; English version of DIN EN 12373-1 | |
| DIN DIN EN 12373-10 | EN-Aluminium and aluminium alloy - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus | |
| DIN DIN EN 12373-11 | EN-Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20° 45° 60° or 85°; English version of DIN EN 12373-11 | |
| DIN DIN EN 12373-12 | EN-Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments; English version of DIN EN 12373-12 | |
| DIN DIN EN 12373-13 | EN-Aluminium and aluminium alloys - Anodizing - Part 13: Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer; English version of DIN EN 12373-13 | |
| DIN DIN EN 12373-14 | EN-Aluminium and aluminium alloys - Anodizing - Part 14: Visual determination of image clarity of anodic oxidation coatings - Chart scale method; English version of DIN EN 12373-14 | |
| DIN DIN EN 12373-15 | EN-Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation; English version of DIN EN 12373-15 | |
| DIN DIN EN 12373-16 | EN-Aluminium and aluminium alloys - Anodizing - Part 16: Check for continuity of thin anodic oxidation coatings Copper sulfate test; English version of DIN EN 12373-16 | |
| DIN DIN EN 12373-17 | EN-Aluminium and aluminium alloys - Anodizing - Part 17: Determination of electric breakdown potential; English version of DIN EN 12373-17 | |
| DIN DIN EN 12373-18 | EN-Aluminium and aluminium alloys - Anodizing - Part 18: Rating system for the evaluation of pitting corrosion; Chart method; English version of DIN EN 12373-18 | |
| DIN DIN EN 12373-19 | EN-Aluminium and aluminium alloys - Anodizing - Part 19: Rating system for the evaluation of pitting corrosion; Grid method; English version of DIN EN 12373-19 | |
| DIN DIN EN 12373-2 | EN-Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method | |
| DIN DIN EN 12373-3 | EN-Aluminium and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope | |
| DIN DIN EN 12373-5 | EN-Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance | |
| DIN DIN EN 12373-6 | EN-Aluminium and aluminium alloys - Anodizing - Part 6: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior | |
| DIN DIN EN 12373-7 | EN-Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior ac | |
| DIN DIN EN 12373-8 | EN-Aluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings | |
| DIN DIN EN 12373-9 | EN-Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus | |
| DIN DIN EN 12384 | EN-Copper and copper alloys - Determination of spring bending limit on strip | |
| DIN DIN EN 12385-1 | EN-Steel wire ropes - Safety - Part 1: General requirements (includes Amendment A1:2008) | |
| DIN DIN EN 12385-10 | EN-Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications (includes Amendment A1:2008) | |
| DIN DIN EN 12385-10 Berichtigung 1 | EN-Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications; Corrigendum 1 to English version of DIN EN 12385-10:2008-07 | |
| DIN DIN EN 12385-2 | EN-Steel wire ropes - Safety - Part 2: Definitions designation and classification (includes Amendment A1:2008) | |
| DIN DIN EN 12385-2 Berichtigung 1 | EN-Steel wire ropes - Safety - Part 2: Definitions designation and classification; Corrigendum 1 to English version of DIN EN 12385-2:2008-06 | |
| DIN DIN EN 12385-3 | EN-Steel wire ropes - Safety - Part 3: Information for use and maintenance (includes Amendment A1:2008) | |
| DIN DIN EN 12385-3 Berichtigung 1 | EN-Steel wire ropes - Safety - Part 3: Information for use and maintenance; Corrigendum 1 to English version of DIN EN 12385-3:2008-06 | |
| DIN DIN EN 12385-4 | EN-Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications (includes Amendment A1:2008) | |
| DIN DIN EN 12385-4 Berichtigung 1 | EN-Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications; Corrigendum 1 to English version of DIN EN 12385-4:2008-06 | |
| DIN DIN EN 12385-5 | EN-Steel wire ropes - Safety - Part 5: Stranded ropes for liftings | |
| DIN DIN EN 12385-5 Berichtigung 1 | EN-Steel wire ropes - Safety - Part 5: Stranded ropes for lifts; Corrigenda to DIN EN 12385-5:2003-03 | |
| DIN DIN EN 12385-6 | EN-Steel wire ropes - Safety - Part 6: Stranded ropes for mine shafts | |
| DIN DIN EN 12385-7 | EN-Steel wire ropes - Safety - Part 7: Locked coil ropes for mine shafts | |
| DIN DIN EN 12385-8 | EN-Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons | |
| DIN DIN EN 12385-9 | EN-Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons | |
| DIN DIN EN 12392 | EN-Aluminium and aluminium alloys - Wrought stock products - Special requirements for products intended for the production of pressure equipment; English version of DIN EN 12392 | |
| DIN DIN EN 12402 | EN-Lead and lead alloys - Methods of sampling for analysis | |
| DIN DIN EN 12420 | EN-Copper and copper alloys - Forgings | |
| DIN DIN EN 12421 | EN-Magnesium and magnesium alloys - Unalloyed magnesium | |
| DIN DIN EN 12438 | EN-Magnesium and magnesium alloys - Magnesium alloys for cast anodes; German version EN 12538:1998 | |
| DIN DIN EN 12441-1 | EN-Zinc and zinc alloys - Chemical analysis - Part 1: Determination of aluminium in zinc alloys; Titrimetric method | |
| DIN DIN EN 12441-10 | EN-Zinc and zinc alloys - Chemical analysis - Part 10: Determination of chromium and titanium in zinc alloys - Spectrophotometric method | |
| DIN DIN EN 12441-11 | EN-Zinc and zinc alloys - Chemical analysis - Part 11: Determination of silicon in zinc alloys - Spectrophotometric method | |
| DIN DIN EN 12441-2 | EN-Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method | |
| DIN DIN EN 12441-3 | EN-Zinc und zinc alloys - Chemical analysis - Part 3: Determination of lead cadmium and copper; Flame atomic absorption spectrometric method; English version of DIN EN 12441-3 | |
| DIN DIN EN 12441-4 | EN-Zinc and zinc alloys - Chemical analysis - Part 4: Determination of iron in zinc alloys - Spectrophotometric method | |
| DIN DIN EN 12441-5 | EN-Zinc and zinc alloys - Chemical analysis - Part 5: Determination of iron in primary zinc - Spectrophotometric method | |
| DIN DIN EN 12441-6 | EN-Zinc and zinc alloys - Chemical analysis - Part 6: Determination of aluminium and iron - Flame atomic absorption spectrometric method | |
| DIN DIN EN 12441-7 | EN-Zinc and zinc alloys - Chemical analysis - Part 7: Determination of tin - Flame atomic absorption spectrometric method after extraction | |
| DIN DIN EN 12441-8 | EN-Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method | |
| DIN DIN EN 12441-9 | EN-Zinc and zinc alloys - Chemical analysis - Part 9: Determination of nickel in zinc alloys - Flame atomic absorption spectrometric method | |
| DIN DIN EN 12449 | EN-Copper and copper alloys - Seamless round tubes for general purposes |