DIN English - Metallurgy Collection
This collection contains documents from the following standards organization(s):
Deutsches Institut Fur Normung E.V.
Most Popular Standards from the DIN English - Metallurgy Collection
| DIN DIN EN 10204 | EN-Metallic products - Types of inspection documents | |
| DIN DIN 50113 | EN-Testing of metals; Rotating bar bending fatigue test | |
| DIN DIN EN 10045-1 | EN-Charpy impact test on metallic materials; test method (English version of DIN EN 10045 Part 1) | |
| DIN DIN 50018 | EN-Sulfur dioxide corrosion testing in a saturated atmosphere | |
| DIN DIN 50929-3 | EN-Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; buried and underwater pipelines and structural components | |
| DIN DIN EN 1369 | EN-Founding - Magnetic particle inspection | |
| DIN DIN EN 10169-2 | EN-Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications | |
| DIN DIN 536-1 | EN-Crane rails; hot rolled flat bottom crane rails (type A); dimensions section parameters and steel grades | |
| DIN DIN EN 10217-1 | EN-Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties | |
| DIN DIN EN 10210-2 | EN-Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances dimensions and sectional properties | |
| DIN DIN EN 10243-1 | EN-Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings; English version of DIN EN 10243-1 | |
| DIN DIN EN 10130 | EN-Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions | |
| DIN DIN EN 10139 | EN-Cold rolled uncoated mild steel narrow strip for cold forming - Technical delivery conditions | |
| DIN DIN 1686-1 | EN-Rough castings of grey cast iron - General tolerances and machining allowances (For replacement purposes only) | |
| DIN DIN 1688-4 | EN-Light metal alloy raw castings; pressure die castings; general tolerances machining allowances | |
| DIN DIN 536-2 | EN-Crane Rails Type F (Flat); Dimensions Static Values Steel Grades | |
| DIN DIN EN 10163-2 | EN-Delivery requirements for surface conditions of hot-rolled steel plates wide flats and sections - Part 2: Plate and wide flats | |
| DIN DIN 50930-6 | EN-Corrosion behaviour of metalic materials in contact with water - Part 6: Effects on drinking water quality | |
| DIN DIN EN 10088-2 | EN-Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes | |
| DIN DIN EN 10029 | EN-Hot rolled steel plate 3 mm thick or above; tolerances on dimensions shape and mass (English version of DIN EN 10029) | |
| DIN DIN EN 1559-1 | EN-Founding - Technical conditions of delivery - Part 1: General | |
| DIN DIN EN 12890 | EN-Founding - Patterns pattern equipment and core boxes for the production of sand moulds and sand cores; English version of DIN EN 12890 | |
| DIN DIN EN 586-2 | EN-Aluminium and aluminium alloy forgings - Mechanical properties and additional properties | |
| DIN DIN EN 10263-4 | EN-Steel rod bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering; English version of DIN EN 10263-4 | |
| DIN DIN 1026-2 | EN-Hot-rolled steel channels with parallel flanges - Part 2: Dimensions masses and static parameters | |
| DIN DIN 17007-4 | EN-Material Numbers; System of the Principal Groups 2 and 3: Non-ferrous Metals | |
| DIN DIN EN 10278 | EN-Dimensions and tolerances of bright steel products | |
| DIN DIN EN 10027-2 | EN-Designation systems for steel; numerical system (Enlish version of DIN EN 10027 Part 2) | |
| DIN DIN EN 10058 | EN-Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions | |
| DIN DIN EN 10218-2 | EN-Steel wire and wire products: General - Wire dimensions and tolerances | |
| DIN DIN EN 1561 | EN-Founding - Grey cast iron | |
| DIN DIN EN 10083-2 | EN-Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels | |
| DIN DIN EN 10132-4 | EN-Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 4: Spring steels and other applications | |
| DIN DIN EN 10027-1 | EN-Designation systems for steels - Part 1: Steel names | |
| DIN DIN EN 10160 | EN-Ultrasonic testing of steel flat products of thickness equal or greater than 6 mm (reflection method) | |
| DIN DIN EN 1371-1 | EN-Founding - Liquid penetrant inspection - Part 1: Sand gravity die and low pressure die castings | |
| DIN DIN EN 10293 | EN-Steel castings for general engineering uses | |
| DIN DIN 1025-2 | EN-Hot rolled I and H sections (IPB series) - Dimensions mass and static parameters | |
| DIN DIN EN ISO 2566-1 | EN-Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) | |
| DIN DIN EN 10092-2 | EN-Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves dimensions and tolerances on shape and dimensions | |
| DIN DIN EN 10088-3 | EN-Stainless steels - Part 3: Technical delivery conditions for semi-finished products bars rods wire sections and bright products of corrosion resisting steels for general purposes | |
| DIN DIN 59220 | EN-Hot-rolled embossed steel plate - Dimensions mass and tolerances | |
| DIN DIN EN 10269 | EN-Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties (includes Amendment A1:2006 and Corrigenda Ber 1:2006-10 + Ber 2:2007-02) | |
| DIN DIN EN 10034 | EN-Structural steel I and H sections; tolerances on shape and dimensions | |
| DIN DIN 1683-1 | EN-Rough castings - General tolerances and machining allowances (For replacement purposes only) | |
| DIN DIN EN 10217-7 | EN-Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes | |
| DIN DIN EN 10087 | EN-Free-cutting steels - Technical delivery conditions for semi-finished products hot-rolled bars and rods | |
| DIN DIN EN 10297-1 | EN-Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes | |
| DIN DIN EN 1563 | EN-Founding - Spheroidal graphite cast irons | |
| DIN DIN EN 10151 | EN-Stainless steel strip for springs - Technical delivery conditions |
View Alphabetical Listing of Documents
- Documents: DIN DIN 1025-1 to DIN DIN 50113
- Documents: DIN DIN 50125 to DIN DIN EN 10028-1
- Documents: DIN DIN EN 10028-3 to DIN DIN EN 10202
- Documents: DIN DIN EN 10205 to DIN DIN EN 10246-9
- Documents: DIN DIN EN 10248-1 to DIN DIN EN 10323
- Documents: DIN DIN EN 10324 Berichtigung 1 to DIN DIN EN 12449
- Documents: DIN DIN EN 12451 to DIN DIN EN 13920-4
- Documents: DIN DIN EN 13920-7 to DIN DIN EN 1669
- Documents: DIN DIN EN 1706 to DIN DIN EN 603-1
- Documents: DIN DIN EN 603-3 to DIN DIN EN ISO 16784-1
- Documents: DIN DIN EN ISO 17081 to DIN DIN EN ISO 7799